Vonets VAP11N Instrucciones de uso
VONETS——VAP11N 300M WiFi Repeater WiFi Bridge
1
300M Professional Mini
WiFi Bridge
WiFi Repeater
VAP11N
Quick Setting Guide
VONETS——VAP11N 300M WiFi Repeater WiFi Bridge
2
Declaration
Copyright © 2015 Shenzhen HouTian Network Communication Technology Co.,Ltd. All Rights
Reserved,with retained ownership.
Without Shenzhen HouTian Network Communication Technology Co., Ltd written
authorization, any company or personal can’t copy, writer or translation part or all
contents. Can’t do commodity distribution for any commercial or profitable purposes
by any ways (electricity, mechanical, photoprint, record or other methods).
VONETS is the registered trademark of Shenzhen HouTian Network Communication
Technology Co., Ltd. The other all trademarks or registered trademarks mentioned in
this documents are belong to the individual owners.
The product specifications and information technology mentioned in this manual are just for
reference, if any updates,without other notice. Except for special agreements, this manual is just
for user guidance, any statements, information and so on in this manual can’t constitute the
warranty of any forms.
VONETS——VAP11N 300M WiFi Repeater WiFi Bridge
3
Product Introduction:
VAP11N supports two kinds of functions
1. WiFi Repeater （VAP11N) : is a functional device that assists the Internet communication
gateway to expand wireless coverage area. It is mainly used for expansion of wireless network
signal and area coverage to make sure the smooth running of home wireless network.
2. Intelligent WiFi Bridge mode(VAP11N): WiFi intelligent bridge function, wireless to wired, wired
to wireless intelligent switching.
Remark:
1. When you want to restore the factory default setting, please press RESET button on the product
for 5 seconds, after blue light blink a few, it will reset automatically (it will take about 30 seconds).
VONETS——VAP11N 300M WiFi Repeater WiFi Bridge
4
2. The operative mode of the device is “WiFi bridge+WiFi Repeater”, user no need switch WiFi
repeater and bridge.
Chapter 1 Quick Setting Guide of WiFi
Repeater mode
1. Configure VAP11N
Wireless connect VAP11N by laptops, smart mobiles, IPAD and other wireless devices.
The default WiFi SSID (WiFi name) is: VONETS_the last six characters of product MAC address.
The default WiFi password is 12345678
If you configure VAP11N by computer, please set computer IP address to obtain an IP address
automatically, please see the words in the red circle of the following picture:
Remark:
1) If users wireless connect VAP11N by computer, please disable the Local Area Connection and other
adapters.
2) If users wired connect VAP11N by computer, please disable the Wireless Network Connection and
other adapters.
2.Open the browser, enter http://vonets.cfg or enter the IP address of VAP11N: http://192.168.2
54.254.
VONETS——VAP11N 300M WiFi Repeater WiFi Bridge
5
Remark:
1)Enter domain name, then Enter, the login page will appear, the default user and password is
admin.
2)After reset to the factory, the default IP of VAP11N is 192.168.254.254.
3. Scan Hotspots
After entering the IE browser, the WiFi hotspots window will appear, can search the WIFI hotspots
signal that opened SSID broadcast around, please see the following:
4. Choose a correct WiFi signal, then click Next, the following interface will appear:
5. Enter the correct password of the wifi hotspot that VAP11N connected, confirm it is correct one,
then click Apply button.
VONETS——VAP11N 300M WiFi Repeater WiFi Bridge
6
6. After click Apply button, the above prompt will appear, after saved the configuration parameters
successfully, in ensuring the correct password, please restart the device.
Remark: 1) After configured successfully, the WiFi name of the device is source WiFi name_the last two
character of Mac address, the password, encryption method and channel and some other parameters are the
same as source hotspot, user can change SSID (hotspot name) and password in WiFi repeater option.
2) In local area network, there is more than one WiFi repeater, it is recommended users to use a static IP
configuration. The method of how to set static IP, please click to refer to the documents:
http://www.vonets.com/serviceView.asp?D_ID=215
4.WiFi Repeater
In “Basic Settings”, user can choose to disable WiFi network, revise WiFi Repeater (SSID).
In “WiFi Security”, user can change Security mode and WiFi pass phrase.
Shenzhen Houtian Network Communication Technology Co.,Ltd
http://www.vonets.com
Tabla de contenidos
