Void Stasys Xair Manual de usuario
voidacoustics.com
Stasys Xair
Ruthless, resilient bass
USER GUIDE V2.0
©2022 Void Acoustics Research Ltd.
This user guide is subject to change without notice.
For the latest online version, visit: www.voidacoustics.com
Void Acoustics and the Void logo are registered trademarks of Void Acoustics
Research Ltd. in the United Kingdom, USA and other countries; all other Void
trademarks are the property of Void Acoustics Research Ltd.
UG10526-2.0 - Stasys Xair User Guide V2.0 Page 3
Contents
1 Safety and regulations 4
1.1 Important safety instructions 4
1.2 Limitations 4
1.3 EC declaration of conformity 4
1.4 UKCA Conformity 4
1.5 Warranty Statement 4
1.6 WEEE directive 4
2 Unpacking and Checking 5
3About 6
3.1 Welcome 6
3.2 Stasys Xair overview 6
3.3 Key features 6
3.4 Specifications 7
3.5 Dimensions 7
4 Cable and wiring 8
4.1 Electrical Safety 8
4.2 Cable considerations for fixes installations 8
4.3 Impedance graph 8
4.4 Stasys Xair wiring diagram 9
4.5 Bias Q5 speakON™ wiring 9
4.6 Amplifier loading guidelines 10
5 Operating Modes 11
5.1 Manual handling guidelines 11
5.2 Typical modes 11
6 Adjustments 12
6.1 Wheel removal 12
6.2 Grille removal 12
7 Service 14
7.1 Return authorisation 14
7.2 Shipping and packing considerations 14
8 Appendix 15
Page 4UG10526-2.0 - Stasys Xair User Guide V2.0
1.1 Important safety instructions
The lightning flash with an arrowhead symbol
within an equilateral triangle is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sucient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user of the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
Safety instructions - read this first
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
8. Do not install near any heat source such as radiators, heat
registers, stoves, or other such apparatus that produce heat.
9. Do not defeat the safety purpose of the grounding-type plug. A
grounding type plug has two blades and a third grounding prong.
The third prong is provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
10. Protect power cords from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit the apparatus.
11. Only use attachments and accessories specified by Void
Acoustics.
12. Only use with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug the apparatus during lightning storms or when unused
for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any way,
such as when the power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. Since the mains power supply cord attachment plug is used to
disconnect the device, the plug should always be easily accessible.
16. Void loudspeakers can produce sound levels capable of
causing permanent hearing damage from prolonged exposure.
The higher the sound level, the less exposure needed to cause
such damage. Avoid prolonged exposure to the high sound levels
from the loudspeaker.
1.2 Limitations
This guide is provided to help familiarise the user with the
loudspeaker system and its accessories. It is not intended to
provide comprehensive electrical, fire, mechanical and noise
training and is not a substitute for industry-approved training. Nor
does this guide absolve the user of their obligation to comply
with all relevant safety legislation and codes of practice. While
every care has been taken in creating this guide, safety is user-
dependent and Void Acoustics Research Ltd cannot guarantee
complete safety whenever the system is rigged and operated.
1.3 EC declaration of conformity
For EC Declaration of Conformity please go to:
www.voidacoustics.com/eu-declaration-loudspeakers
1.4 UKCA marking
For details of the UKCA marking go to:
www.voidacoustics.com/uk-declaration-loudspeakers
1.5 Warranty statement
For warranty statement go to:
https://voidacoustics.com/terms-conditions/
1.6 WEEE directive
If the time arises to throw away your product, please recycle all
the components possible.
This symbol indicates that when the end-user
wishes to discard this product, it must be sent
to separate collection facilities for recovery
and recycling. By separating this product from
other household-type waste, the volume of
waste sent to incinerators or land-fills will be
reduced and natural resources will thus be
conserved.
The Waste Electrical and Electronic Equipment Directive (WEEE
Directive) aims to minimise the impact of electrical and electronic
goods on the environment. Void Acoustics Research Ltd complies
with the Directive 2002/96/EC and 2003/108/EC of the European
Parliament on waste electrical finance the cost of treatment and
recovery of electronic equipment (WEEE) in order to reduce the
amount of WEEE that is being disposed of in land-fill sites. All of
our products are marked with the WEEE symbol; this indicates that
this product must NOT be disposed of with other waste. Instead
it is the user’s responsibility to dispose of their waste electrical
and electronic equipment by handing it over to an approved
reprocessor, or by returning it to Void Acoustics Research Ltd for
reprocessing. For more information about where you can send
your waste equipment for recycling, please contact Void Acoustics
Research Ltd or one of your local distributors.
1 Safety and Regulations
Page 5UG10526-2.0 - Stasys Xair User Guide V2.0
2 Unpacking and Checking
All Void Acoustics products are carefully manufactured and thoroughly tested before being
despatched. Your dealer will ensure that your Void products are in pristine condition before
being forwarded to you but mistakes and accidents can happen.
Before signing for your delivery:
• Inspect your shipment for any signs of contamination, abuse or transit damage as soon
as you receive it
• Check your Void Acoustics delivery fully against your order
• If your shipment is incomplete or any of its contents are found to be damaged; inform
the shipping company and inform your dealer.
When you are removing your Stasys Xair loudspeaker from its original packaging:
• Stasys Xair loudspeakers come packaged in a lid and base carton that has a protective sleeve
around it; avoid using sharp implements to remove the cardboard to protect the finish
• If you need to place the loudspeaker on a flat surface make sure it is free from debris
• When you have removed the Stasys Xair loudspeaker from the packaging inspect it
to ensure there is no damage and keep all original packaging in case it needs to be
returned for any reason.
See section 1 for warranty conditions and see section 7 if your product needs servicing.
Page 6UG10526-2.0 - Stasys Xair User Guide V2.0
3 About
3.1 Welcome
Many thanks for purchasing this Void Acoustics Stasys Xair. We truly appreciate your sup-
port. At Void, we design, manufacture and distribute advanced professional audio systems
for the installed and live sound market sectors. Like all Void products, our highly skilled
and experienced engineers have successfully combined pioneering technologies with
ground-breaking design aesthetics, to bring you superior sound quality and visual innova-
tion. In buying this product, you are now part of the Void family and we hope using it brings
you years of satisfaction. This guide will help you both use this product safely and ensure it
performs to its full capability.
3.2 Stasys Xair overview
A reliable, versatile low frequency enclosure, specially designed with predictable behaviour
you can trust. For added expression, colour customise the aluminium bracing.
3.3 Key features:
• High output, double 18”, horn-loaded low frequency enclosure
• Special ‘Air’ edition of Stasys XV2
• 3200 Watts AES power handling
• Negligible power compression
• Improved transient and phase response
• Tough ‘TourCoat’ polyurea finish
• Truck pack friendly dimensions
• Universal location receptors
Page 7UG10526-2.0 - Stasys Xair User Guide V2.0
3 About
3.4 Specifications
Frequency response 30 Hz - 180 Hz ±3 dB
Eciency1103.8 dB 1W/1m
Nominal impedance 4 Ω
Power handling23200 W AES
Maximum output3138 dB cont, 144 dB peak
Driver configuration 2 x 18” LF
Dispersion Array dependent
Connectors 2 x 4-pole speakON™ NL4
Height 562 mm (22.1”)
Width 1226 mm (48.3”)
Depth 903 mm (35.6”)
Weight 130 kg (286.6 lbs)
Enclosure 18 mm birch plywood
Finish Textured ‘TourCoat’ polyurethane
Grille Perforated steel with foam filter
1Measured in half space 2AES2 - 1984 compliant 3Calculated
3.5 Dimensions
1218 (48”)
554 (21.8”)
896 (35.3”)
562 (22.1”)
1226 (48.3”)
1218 (48”)
896 (35.3”)
1218 (48”)
896
903 (35.6”)
903 (35.6”)
Figure 3.1: Dimensions
Page 8UG10526-2.0 - Stasys Xair User Guide V2.0
4 Cable and Wiring
4.1 Electrical safety
To avoid electrical hazards please note the following:
• Do not access the inside of any electrical equipment. Refer servicing to
Void-approved service agents.
4.2 Cable considerations for fixed installations
We recommend specifying installation-grade Low Smoke Zero Halogen (LSZH) cables
for permanent installations. The cables should use Oxygen Free Copper (OFC) of grade
C11000 or above. Cables for permanent installations should be compliant with the
following standards:
• IEC 60332.1 Fire retardancy of a single cable
• IEC 60332.3C Fire retardancy of bunched cables
• IEC 60754.1 Amount of Halogen Gas Emissions
• IEC 60754.2 Degree of acidity of released gases
• IEC 61034.2 Measurement of smoke density.
We suggest using the following maximum copper cable lengths to keep level losses below 0.6
dB.
Metric mm2Imperial AWG 4 Ωload 2 Ωload
2.50 mm213 AWG 18 m 9 m
4.00 mm211 AWG 30 m 15 m
4.3 Impedance graph
10 10020 50 200 500 1k 2k 5k 10k 20k
10
20
30
40
50
Frequency (Hz)
Impedance (Ω)
Figure 4.1: Impedance graph
Page 9UG10526-2.0 - Stasys Xair User Guide V2.0
4 Cable and Wiring
+
-
1+
1-
2+
2-
1+
1-
2+
2-
1+
1-
2+
2-
1+
1-
2+
2-
In
Out/Link 18” LF
+
-
18” LF
Figure 4.2: Stasys Xair wiring diagram
4.4 Stasys Xair wiring diagram
speakONTM pins 1+/1- speakONTM pins 2+/2-
In LF (2 x 18”) n/c
Out Link/out n/c
4.5 Bias Q5 speakONTM wiring
1+
1-
1+
1-
Bias Q5 Output 1 or 2
Output LF (2 x 18”)
Max parallel units 2 (2 Ωload to amplifier)
Figure 4.3: Bias Q5
Page 10UG10526-2.0 - Stasys Xair User Guide V2.0
Figure 4.5: 2 x Stasys Xair: 4 Ωper channel/1 amplifier
Figure 4.5: 4 x Stasys Xair: 2 Ωper channel/1 amplifier
Figure 4.6: 6 x Stasys Xair: 2 Ωper channel/2 amplifier
Ensure all amplifier channels are loaded equally. Limiters engage correctly. Cabinets
acoustic principles are the same.
4.6 Amplifier loading guidelines
Figure 4.7: 8 x Stasys Xair: 2 Ωper channel/2 amplifier
4 Cable and Wiring
Tabla de contenidos
Otros manuales de Subwoofer de Void
