2 INTRODUCTION
The multi-zone, 6-zone powered mixers of the MZ series with FM radio, Keysol, USB, Micro SD and Bluetooth have a power of
120W (MZ6120BTK), 240W (MZ6240BTK), 350W (MZ6350BTK) or 500W (MZ6500BTK). They are to be used in environments
with a large number of loudspeakers, where the same music (sound system) is required with independent volume adjustment on
the zones. For example restaurants, bars, offices, banks, places of worship, etc...
The multi-zone powered mixers of the MZ series are designed to offer maximum protection against overloads, short circuits and
overheating to avoid any type of damage to people or things.
IMPORTANT: the sum of the powers of the 100V loudspeakers connected to the 6 amplifier outputs MUST NEVER EXCEED
THE NOMINAL POWER OF THE AMPLIFIER ITSELF.
ATTENTION: this series of amplifiers only requires 100V audio speakers. Connecting 8 ohm audio speakers can cause serious
damage.
Notes: Choose the amplifier according to the total power needed 120W (MZ6120BTK), 240W (MZ6240BTK), 350W
(MZ6350BTK) or 500W (MZ6500BTK).
It should be noted that the total power of the amplifier is divided between the zones.
For example, if the 240W MZ6240BTK is chosen and nominal 200W loudspeakers are connected to ZONE 1, while nominal 40W
loudspeakers are connected to ZONE 2, the power of the amplifier must be considered saturated. You will not be able to connect
other speakers to ZONE3/4/5/6.
Features
• Compact, all-in-one, 6-zone, public address 100V multi-zone amplified mixer with integrated sources.
• Independent volume adjustment on each zone.
• Vocal messages, selective or general, via BM6 microphone bases (max 6).
• Voice messages, general, via microphone base BM1000D.
• USB/Micro SD Mp3 Player (front panel ports), FM Radio, Keysol and Bluetooth.
• Microphone inputs for microphones, microphone bases, wireless microphones.
• Integrated 100V transformer.
• Output power 120W/240W/350W/500W (depending on the model).
• Speaker output at 100V.
• IR remote control supplied to control USB, Micro SD, FM radio and Bluetooth functions.
• LED indicators for power, clip, protect and signal.
• 6 mixable inputs + sources + priority emergency input + multizone microphone base.
• CH1 (priority): mic JACK 5-8mV 600Ω.
• CH2-3-4: XLR 5-8mV 600 mic Ω phantom power (selectable) / line XLR 150-470mV 10KΩ (switchable).
• CH5-6: RCA lines.
• CH7 EMC: priority emergency input for evacuation or service messages.
• CH8: BM6 multi-zone microphone base input paging.
• Adjustable MUTE function.
• RCA line out: 0.775V (0dBV) output dependent on input channels and independent of volume.
• 75Ω antenna for FM RADIO reception.
• Treble/bass tone control. Short circuit, clip, overload and overheat protection.
