VIV SIXFIVE VIV68DSP Manual de usuario
VIV68DSP INSTRUCTIONS
• Signal Sensing, summing & delay
• 12 and 24 dB/Octave Crossovers
• 6-Channel Input, 8-Channel Output
• 31 Band Equalizer per channel
• Toslink input (optical input)
• Remote for Preset Recall and Level Control
• Wireless connection and audio streaming
• DSP App : PC, iOs, or Android
Active Range
S/N Ratio
T.H.D.
Freq. Response
Input Impedance
Low level output impedance
Signal input/output range
Temperature
Supply Voltage
Turn-on REM output
Current Draw
Input signal type
RCA output location
Output signal gain
Output signal equalizer
Output signal crossover
Output phase and time delay
Scene operations
≥110dB
≥100dB
≤0.02%
10Hz〜20KHz
Low level input: 20KΩ, High level input: 180Ω
≥36Ω
RCA Input：1.9-4V
High level：18.5V
Output：4.1V
-40〜70℃
DC 8.5V〜16.5V
+12 V starting voltage output(0.2A)
≤.75A
Choice: 6ch high level, 6ch low level, optical, Bluetooth
8ch low level output
Gain range: Mute, -59.9dB to 0.0dB
1-8 Each output channel has independent 31-band equalizer.
Each output high or low pass independent filter
1. Professional filter type: Butterworth, Linkwitz-Riley, Bessel
2. Filter crossover: 20Hz - 20KHz , Resolution 1Hz
3. Filter slope setting: 6/12/18/24/48dB/Oct。
Each output channel can be adjusted for phase and time delay, parameter range
Phase: 0/180゜
Time delay: 0.000-20ms，0.00-692cm，0.00-273inch
Store up 6 six preset settings.
SPECIFICATIONS
FEATURES
INPUT CONNECTIONS
OEM HEAD UNIT
AFTERMARKET
HEAD UNIT
REMOTE
OUTPUT TO AMPLIFIERS
VCC R
RGB OUT
ANT
CH1(L)CH3(L)CH7(L)CH8(R) CH5(L)
OUTPUT CH2(R)CH4(R)CH6(R) REMOTE
GB
CH6(R)
PC CONTROL OPTICAL RCA INPUT
CH5(L) CH4(R) CH3(L) CH2(R) CH1(L) SPK IN6
ISO
IN5 IN4 IN3 IN2 IN1 GND
REM
OUT
REM
TURN-ON
POWER
-
+ + + + + +
- - - - -
IN6 IN5 IN4 IN3 IN2 IN1 +12V
REM
IN
+ -
POWER SUPPLY
(6CH LOW LEVEL INPUT)
EXTERNAL
PROCESSOR HIGH LEVEL INPUT DC TURN ON
REM TURN ON
OUTPUT CONNECTIONS
RGB LED OUTPUT:
VCC = BLACK
R = RED
G = GREEN
B = BLUE
1. High level input (Typically OEM radio)
2. Low level input (Typically aftermarket radio or processor)
3. Optical input (Typically aftermarket radio or processor)
1
OPTICAL INPUT
3
2
MUTE
HOME
AM FM
MENU
NAV
CONNECTOR DESCRIPTION
CH6(R)
PC CONTROL OPTICAL RCA INPUT
CH5(L) CH4(R) CH3(L) CH2(R) CH1(L) SPK IN6
ISO
IN5 IN4 IN3 IN2 IN1 GND
REM
OUT
REM
TURN-ON
POWER
-
+ + + + + +
- - - - -
IN6 IN5 IN4 IN3 IN2 IN1 +12V
REM
IN
VCC R
RGB OUT
ANT
CH1(L)CH3(L)CH7(L)CH8(R) CH5(L)
OUTPUT CH2(R)CH4(R)CH6(R) REMOTE
GB
1. Speaker Level Inputs
2. RCA Analog Line Level Inputs
3. Optical Digital Inputs
4. RCA Analog Line Level Outputs
POWER CONNECTIONS
1 6 109 72
4 57 8
3
CH6(R)
PC CONTROL OPTICAL RCA INPUT
CH5(L) CH4(R) CH3(L) CH2(R) CH1(L) SPK IN6
ISO
IN5 IN4 IN3 IN2 IN1 GND
REM
OUT
REM
TURN-ON
POWER
- - - - - -
HEAD UNIT
REMOTE
+12V TRIGGER
GROUND
12V+
++++++
IN6 IN5 IN4 IN3 IN2 IN1 +12V
REM
IN
REMOTE TURN ON/SIGNAL SENSE
The VIV68DSP has two options, a 12v remote input and signal sense option
REMOTE INPUT OPTION:
The head unit has a +12V trigger output that is connected to the VIV68DSP remote input terminal. When the head unit is turned on, the unit
will turn on the VIV68DSP. The remote out connection of the VIV68DSP may be used to daisy-chain to additional units or amplifiers and turn
them on as well.
SIGNAL SENSE OPTION
WIRED REMOTE:
Channels 7-8 are the default sub channels for the remote sub volume control.
Alternatively, the signal sense feature can be used to tun on the VIV68DSP when an audio input signal is detected at inputs 1-2. Then the
connection to the VIV68DSP’s remote input terminal is not required.
An in-line fuse holder with a 3A fuse should be fitted in the +12V line.
6. +12V Power Ground, Remote In/Out Connector
7 RGB LED Output: VCC = Black, R = Red, G = Green B = Blue
8. Bluetooth Antenna
9. Remote Trigger, Signal Sense
10. Ground Isolation Jumpers (
(NOTE: Ground Isolation Jumpers should only be adjusted with the power OFF)
5. Remote Control Connector
WINDOWS INSTALLATION:
• Double click the VIV68DSP icon to open the software and the main screen will appear as shown above.
• Once the unit is connected to your computer via the included USB cable the computer will find the new device once the VIV68DSP is
powered on and will automatically install the device on your computer.
• Once the device installation is complete the software and the hardware settings will automatically sync.
iOS & Android
• Once downloaded from the app store, launch the app and follow the installation prompts. Once installed you will be able to use the DSP
software on your device.
WINDOWS SOFTWARE DOWNLOAD: Visit www.memphiscaraudio.com/MEMPHISDSP
iOS SOFTWARE DOWNLOAD: Search app store for MEMPHIS DSP
ANDROID SOFTWARE DOWNLOAD: Search Play store for MEMPHIS DSP
Works with Windows XP / Vista / WIN7 / WIN8 / WIN10 operating systems
Once the software is downloaded, double-click the installation file
Follow instructions on the screen until your software installation is complete.
DSP SOFTWARE DOWNLOAD
DESKTOP INTERFACE
iOS & ANDROID INTERFACE
WINDOWS SOFTWARE DOWNLOAD: Visit www.memphiscaraudio.com/MEMPHISDSP
iOS SOFTWARE DOWNLOAD: Search app store for MEMPHIS DSP
ANDROID SOFTWARE DOWNLOAD: Search Play store for MEMPHIS DSP
Works with Windows XP / Vista / WIN7 / WIN8 / WIN10 operating systems
Once the software is downloaded, double-click the installation file
Follow instructions on the screen until your software installation is complete.
VIV68DSP software Windows software is divided into 5 sections:
DESKTOP/WINDOWS SOFTWARE INTERFACE
Section 1 - Input type: high level, AUX, Bluetooth and Optical
Section 2 - Select crossover types
Section 3 - EQ settings for each output
Section 4 - Adjust delay settings
Section 5 - Output channel configuration and mixer settings: The
input signal gain of output channels (CH1-CH8) can be adjusted from
this page. This page can be used to sum input channels by adjusting
input channel levels.
DESKTOP/WINDOWS SOFTWARE INTERFACE
SECTION 1:
OPTIONS
• Advanced
• Firmware settings
• Help
• About
• Restore factory settings
MEMORY
• Load machine presets
• Save machine presets
• Delete machine presets
• Load PC presets
• Save as PC presets
MIXER
This screen will allow you to do 2 things:
Route the inputs to which outputs you prefer
Adjust the level of each input to each output
In the example shown below
• Ch 1 inputs is routed 100% to Ch1 and Ch2 outputs
• Ch 2 input is routed 75% to Ch 3 and Ch4
• Ch 3 input is routed 100% to Ch 5
• Ch 4 input is routed 100% to Ch 6
• Ch 5 input is routed 100% to Ch 7
• Ch 6 input is routed 100% to Ch 7
AUDIO INPUT
This is where you select what signal input source you would like to use
DESKTOP/WINDOWS SOFTWARE INTERFACE
SECTION 2:
XOVER
Use this to set your crossovers for each output channel selected in SECTION 5
TYPE
Set the shape of your crossover
• Bessel: Slow smooth roll off
• Lin_Ril: Linkwitz-Riley –Steep roll off, 6dB down at filter cutoff frequency
• Butter_W : Butterworth - Flat and balanced roll off, 3db down at filter cutoff frequency
FREQ
• Set the frequency points for each crossover
OCT
• This is where you can set the slope for each crossover point
See below for the crossover points selected for CH1
Repeat these instructions for each of the 8 output channels
DESKTOP/WINDOWS SOFTWARE INTERFACE
SECTION 3:
SECTION 4/5
EQUALIZER
This section you can fine tune each output channel to achieve the user’s desired preference
THE VIV68DSP FEATURES 31 BANDS OF ADJUSTMENT
Each band allows you to adjust the following:
• Frequency
• Q – How wide or narrow the adjustment should be
- Narrow Q will affect only the selected frequency.
- Wide Q will affect the output of nearby frequencies
• dB: Decide how much to cut or boost the selected frequency
1. OUTPUT LEVEL
• Here you can set the output level for each of the 8 output channels
2. PHASE
• Here you can set each output channel at 0 or 180 degrees
3. MUTE
• Select which of the 8 output channels you would like to mute
4. TIME DELAY
This is where you can add delay on a speaker to allow the sound to hit both of the listener’s ears at the same time to improve imaging.
Determining Distance
• If the listener is in the DRIVER side
• The PASSENGER side speaker (CH2) could be at 0”
• The DRIVER side speaker (CH1) could be set to 10“ which is the DIFFERENCE in distance between the two speakers to
the listeners ear. (Do NOT enter in the actual distance for each speaker to the ear, only the difference in length).
1 2 3 4
DESKTOP/WINDOWS SOFTWARE INTERFACE
The 7 buttons on the bottom right of the PC software do the following:
BYPASS/RESTORE EQ: Allows you to hear the difference with your adjustments and without
RESET EQ: This allows you to remove your adjustments and start over from the beginning.
NORMAL MODE/CROSSOVER MODE: Crossover mode shows the names of each channel based on your install.
RESET OUTPUT: This will reset the channel specific settings
NORMAL MODE
BEFORE RESET
AFTER RESET
CROSSOVER MODE
Tabla de contenidos
