VITINNI Te Verde D2818E Manual de usuario

For further assistance, other products and more, join us at:

Website: www.vitinni.co.uk

Instagram: @vitinniuk

Facebook: www.facebook.com/vitinni

Te Verde 1.7Ltr Temperature

Controlled Kettle

PLEASE READ AND KEEP THESE INSTRUCTIONS FOR FUTURE USE

SAP Code: JF07520300

INTRODUCTION

Thank you for choosing our Te Verde 1.7Ltr Temperature Controlled Kettle. Please

read this user manual carefully before use and keep it for future reference. The

manufacturer and importer do not accept any liability if the information in these

operation instructions is not complied with. If you need any assistance, please

contact our customer service team on the details provided on the back page of this

manual. Basic safety precautions should always be followed when using this

appliance.

SAFETY INSTRUCTIONS

This appliance is for indoor use only.

This appliance is for domestic use only and should not be used for commercial

purposes.

Check that the voltage on the rating plate corresponds with that of the local network

before connecting the appliance to the mains power supply.

This appliance can be used by children aged from 8 years and above and persons

with reduced physical, sensory or mental capabilities or lack of experience and

knowledge providing they have been given supervision or instruction concerning use

of the appliance in a safe way and understand the hazards involved. Cleaning and

user maintenance shall not be undertaken by children unless they are older than 8

and supervised.

This is not a toy - children should be supervised to ensure they do not play with the

appliance. Keep the appliance and its cord out of reach of children less than 8 years.

If the appliance, power supply cord and plug are malfunctioning or they have been

dropped or damaged switch off the appliance and discontinue use immediately.

This appliance contains no user serviceable parts. Repairs should only be

undertaken by the manufacturer, its service agent or a similar qualified person.

If the power supply cord is damaged, it must be replaced by the manufacturer, its

service agent or a similar qualified person in order to avoid a hazard.

Keep the power supply cord away from sharp edges and parts of the appliance that

may become hot during use.

Do not use this appliance with an extension lead or multiple socket adaptor.

Do not use this appliance near an open flame or in moist or damp conditions.

Allow sufficient space around the Kettle for ventilation and heat dissipation. Place on

a flat, stable, heat resistant surface a minimum distance of 5 to 10 cm from walls and

other items.

Do not leave the appliance unattended whilst connected to the mains power supply.

Switch off the mains power supply and remove the plug by hand.

Always disconnect the appliance from the power supply before assembling,

disassembling or performing cleaning or maintenance.

Do not immerse the Kettle, power supply cord, power base or plug in water. Care

should be taken to avoid spillage on the electrical components, power connector,

power cord and plug.

Do not use any accessories or attachments with the appliance that have not been

supplied or recommended by the manufacturer.

CAUTION: Misuse of the appliance could cause injury – do not use the appliance

for anything other than its intended use

CAUTION: Hot surface. To avoid injury do not touch the hot or heated

surfaces of the Kettle. The heated surfaces and heating element may contain

residual heat and still be hot after use. Allow the Kettle to cool fully before moving or

handling.

WARNING: Do not open the lid while the water is boiling.

Boiling Water and Steam can be released from the kettle during use and can cause

serious injury, scalds and burns. Allow vigorous boiling to subside before removing

the kettle from the power base. Exercise caution when handling the kettle.

Do not overfill the kettle past the maximum mark. If the kettle is overfilled, boiling

water may be ejected

WARNING: Spillage on the connector can cause an electrical hazard. If spillage

occurs disconnect the power and let the power base dry thoroughly before re-use.

To avoid electrical hazards, the kettle should only be used with the power base

provided

BOIL DRY SENSOR

If the kettle is accidentally turned on whilst empty or boils dry during use, the boil dry

sensor will turn the kettle off until it has cooled sufficiently to resume normal

operation.

Do not try to use the kettle during this time – disconnect the power and allow the

kettle to cool

CARE AND MAINTENANCE

Unplug the Kettle from the mains power supply and allow to cool fully before

performing any cleaning or maintenance.

Never immerse the Kettle body, power cord, power base or plug in liquid or allow

moisture to contact these parts

Wipe the Kettle body and power base with a damp cloth and a small amount of mild

detergent

Rinse the inside of the Kettle with cool, clean water and use a damp cloth or brush to

remove any solid residue

Do not use harsh abrasives, cleaning detergents or scourers to clean the Kettle as

this could damage the finish

LIMESCALE REMOVAL

To maintain the performance and correct operation of your kettle it should be

descaled regularly. Mineral deposits from the water will form on the inside of the

kettle, especially in hard water areas.

To descale the kettle: use a commercially available descaling solution which is

suitable for use with kettles. Follow the instructions provided with the descaling

solution.

STORAGE

Ensure that the kettle is cool, clean and dry before storage. Wrap the excess power

cord loosely around the holder on the underside of the power base. Store in a cool,

dry place away from direct sunlight.

SPECIFICATIONS

Model: D2818E

Rated voltage: 220-240V~

Frequency: 50/60Hz

Rated Power: 1850-2200W

Capacity: 1.7L

DESCRIPTION OF PARTS

1. Spout

2. Lid release button

3. Lid

4. Control Panel

5. Body

6. Handle

7. LED Temperature

Indicator Light

8. Power Cord

Cut-out

9. Power Base

10. On/Off Button

11. Temperature

Control Button

12. Temperature

setting indicators

LED Temperature Indicator Light Colours:

10.

11.12.

BEFORE FIRST USE

Before use, check all accessories are complete and that the equipment is not

damaged. The Kettle should be cleaned according to the instructions in the Cleaning

and Maintenance section. The Kettle should be run through an operational cycle

before it is used for the first time.

When using the Kettle for the first time a slight odour may be emitted. This is normal

and will soon subside.

INSTRUCTIONS FOR USE

1. Place the power base onto a flat, level and heat resistant surface

2. Press the Lid release button to open the Lid. Fill the kettle to a level above the

minimum but below the maximum marks on the inside of the kettle body

3. Gently and firmly push the lid closed and place the kettle onto the power base.

Then connect the plug to the mains power supply and switch on the power.

4. All four temperature setting lights on the Control Panel will light up to show

that the power has been connected. The kettle is now ready to be used.

5. Either:

i. Press the On/Off button to boil the water to 100°C

ii. Press the On/Off button and then press the Temperature Control button

to select the keep warm temperature. The water will be boiled to 100°C

first and then kept at the selected temperature (40/55/70/85°C)

iii. Press the Temperature Control Button to select the keep warm

temperature and then press the On/Off button. The water will be heated

to and then kept at the selected temperature (40/55/70/85°C).

Once a keep warm temperature has been set, the keep warm function will

remain active for 12 hours unless the kettle is turned off with the On/Off button

or the power is disconnected.

6. To turn the kettle off, or cancel the current program press the On/Off button.

7. The kettle will emit a beep alert sound to confirm each function has finished.

8. Once the water has finished boiling vigorously or reached the desired

temperature, lift the kettle by the handle and pour out the heated water. To

avoid spillage, do not pour out the water too quickly.

Caution: The lid may spray water and steam may be emitted if opened immediately

after boiling or heating water. Allow the kettle to cool to a safe temperature before

opening the lid to refill the kettle.

Notes:

WEEE INFORMATION

The symbol on this product or its packaging means that this product may not

be treated as household waste. It should be handed to an appropriate collection

point for the recycling of electrical and electronic equipment. Contact your local

council or household waste disposal service for further information.

Do not dispose of electrical appliances as unsorted municipal waste, use separate

collection facilities.

Guarantee

Our products are guaranteed for a period of 2 years from the date of purchase.

Products that develop a fault within this period are covered by our warranty and we

will replace defective parts, or where not available the whole product. The warranty

does not apply to any defect in the goods arising from fair wear and tear, wilful

damage, accident, negligence by you or any third party, use otherwise than as

recommended by us, failure to follow our instructions, any alteration or repair carried

out without our approval or has been the subject of commercial use. Your statutory

rights remain unaffected, in particular any rights you have under the Consumer

Rights Act 2015.

If you have a problem with your product within this warranty period please contact

our customer services team.

In the event of changes to the specification of a product and we are not able to

replace parts, we will replace the whole product within the 2 year guarantee period

For products that fall outside of the 2 year guarantee, we will endeavor to provide

spare parts to purchase for as many of the replaceable parts as possible, but cannot

foresee specification changes or upgrades to products or parts outside of the initial 2

year period.

Customer Services:

If you would like further advice or information on your product, ensure you have the SAP

code ready and please get in touch with us at Vitinni on the contact options below:

SAP Code: JF07520300

Phone: 0330 002 1202 (Mon – Fri 9am to 5pm)

Email: [email protected]

Address: Vitinni, Vale Mill (Rochdale) Ltd, Robinson Street, Rochdale, OL16 1TA

Este manual sirve para los siguientes modelos

Otros manuales de Pava de VITINNI

VITINNI

VITINNI JF07593000 Manual de usuario

Manuales populares de Pava de otras marcas

IKEA

IKEA UPPHETTA Manual de usuario

Krups

Krups BW500B55 Manual de usuario

Clas Ohlson

Clas Ohlson KE7086-BH Manual de usuario

Brock

Brock WK 0902 GR Manual de usuario

inventum

inventum CBW010 Manual de usuario

Westfalia

Westfalia Retro 81 48 86 Manual de usuario

Ovente

Ovente KS88 Series Dimensiones

HUSLOG

HUSLOG AK-0832 Manual de usuario

Saturn

Saturn ST-EK840 Manual de usuario

Wilfa

Wilfa TK-1200B Manual de usuario

HOME ELEMENT

HOME ELEMENT HE-KT150 Manual de usuario

Breville

Breville Crystal Clear BKE290 Manual de usuario

ECG

ECG RK 1745 Manual de usuario

cecotec

cecotec THERMOSENSE 600 TOUCH BLACK Manual de usuario

Kalorik

Kalorik JK 39825 Manual de usuario

tomado

tomado TM-1971 Manual de usuario

Cosori

Cosori CS108-NK Manual de usuario

Electrolux

Electrolux E7K1-6BP Manual de usuario