Vitek VTM-LED170P Manual de usuario

VTM-LED170P

VTM-LED190P

17” & 19” Professional LED Monitor

w/HDMI, VGA, and Dual Looping BNC’s

• 17” / 19” LED Display Panel

• HDMI, VGA, and Dual Looping BNC Composite Video Inputs & Stereo Audio Input

• Resolution up to 1280 x 1024 (SXGA)

• Contrast Ratio of 10,000:1

• <5ms Response time

• 170° Horizontal Viewing Angle

• Picture In Picture (PIP) / POP (Picture On Picture) Display Options

• Front Panel Controls

• VESA 75mm Standard Mounting

• 50,000 Hour Panel Life

• Swivel Rack Mountable with optional VT-LCD17SRM / VT-LCD19SRM Rack Kit

VITEK

1DU00L7B-A.1

Introduction and Package Contents

Introduction

Congratulations on your VITEK LED Monitor purchase. You can expect

only the sharpest and most brilliant color images from this monitor.

Featuring OSD controls and built in speakers, you will find this monitor

both easy to use and a pleasure to view.

Please unpack your monitor with care, and verify that all the parts

listed below are included. If any parts are missing, please contact

your distributor immediately.

Please save the packing box for possible future return for service.

Package Contents

•LED Monitor – VTM-LED170P or VTM-LED190P

•12 Volt DC Power Adapter / Power cord

•D-Sub 15-pin VGA connector Cable

•User's Guide

Hardware Installation

The following sections in this guide give clear, step-by-step

descriptions of the installation process and explain how to use the

monitor for optimum results.

Please pay attention to the Regulations and Warnings Section of this

user’s manual before setting up the display monitor. Failure to do so

may inadvertently result in personal injuries or product damage.

1DU00L7B-A.1

Specifications

VTM-LED170P

VTM-LED190P

Screen Size

17"

19"

Display Type

LED

Aspect Ratio

4:3

Resolution

SXGA (1280x1024)

Response Time

<5ms

Contrast Ratio

10,000:1

Display Color

16.7 Million

Brightness

300cd/m²

Pixel Type

Active Matrix TFT

Pixel Pitch

0.264(H) x 0.264(V)

0.294(H) x 0.294(V)

Viewing Angle (H/V)

170° / 160°

Video System

NTSC/PAL

Video In/Out

2 BNC Inputs / 2 BNC Outputs (Looping)

VGA In

1 (15Pin D-Sub)

HDMI In

Audio Input

Stereo RCA & 1/8" PC

Built In speaker

Yes (1.5W x 2 )

PIP / POP

Analog / Digital

Remote

Optional

3D Comb Filter

YES

3D De-Interlace

YES

Noise Reduction

YES

Multi-Language

English, Spanish, German, French, Italian, Russia, Turkish, Japanese, Polish

Stand Tilt

-5°~15°

Vesa Mount Size

75mm x 75mm

Power Adapter

12VDC (AC100/240 [50/60])

Power Consumption

20W Max

25W Max

Certifications

UL, FCC-DOC, CE, ROHS

Operating Temperature

32° to 104° F (0° to 40° C)

Operating Humidity

10% to 90% relative, non-condensing

Dimensions (w/Stand)

15.16" x 15.12" x 6.50" (385 x 384 x 165mm)

16.69" x 16.34" x 6.50" (424 x 415 x 165mm)

Weight

6.98 lbs (3.17kgs)

7.09 lbs (3.22kgs)

1DU00L7B-A.1

VGA Timing

ITEM

RESOLUTION

H FREQ.(KHZ)

V FREQ.(HZ)

640x400@70

31.460

70.080

640x480@60

31.469

59.940

640x480@72

37.861

72.809

640x480@75

37.500

75.000

720x400@70

31.460

70.080

800x600@56

35.156

56.250

800x600@60

37.879

60.317

800x600@72

48.077

72.188

800x600@75

46.875

75.000

1024x768@60

48.363

60.004

1024x768@70

56.476

70.069

1024x768@75

60.023

75.029

1280x1024@60

63.981

60.020

1280x1024@75

79.976

75.025

Note:

1. Please note, selecting frequencies outside these ranges may result in an abnormal

Images.

2. The resolution will be showed on the screen while VGA mode be selected.

For example:

1DU00L7B-A.1

Monitor and OSD Control

The VITEK VTM-LED170P and VTM-LED190P LED color monitors have a

simple control layout for control and OSD (On Screen Display)

functions. The table below summarizes the control keys and their

related functions.

Keys

Function Description

Toggle the display between standby mode and on.

(Press “Power” and wait 6 sec., monitor will be activated for

display )

Automatically adjusts H-Position, V-Position, Pixel Clock

and Phase for an optimal image in PC mode only.

Switch function.

Increase the value of the chosen item.

Switch function.

Decrease the value of the chosen item.

Switch mode “PC”, ”AV1”, ”AV2”.

Enter the main menu of the on-screen display (OSD).

1DU00L7B-A.1

LED Status Display

The following table describes the various power states of the LED

monitor as represented by different LED colors.

Note: The LED will also be red if AV1, AV2 or HDMI is selected and there is no video

signal detected.

Power State

LED Color

Green

Standby

Red

No power

Blank

1DU00L7B-A.1

Picture Mode

1. Picture Mode

Press (－) OR (＋)to select the picture mode

“User, Standard, Movie, Vivid ”

2. Contrast

This is used to set the brightness of the screen.

Press (－) OR (＋)to adjust the parameter.

3. Brightness

This is used to adjust the image contrast.

Press (－) OR (＋)to adjust the parameter.

4. Tint

This is used to adjust the image Tint.

Press (－) OR (＋)to adjust the parameter.

5. Saturation

This is used to adjust the image saturation.

Press (－) OR (＋)to adjust the parameter.

6. Sharpness

Adjust the sharpness. It makes the image become soft.

Press (－) OR (＋)to adjust the parameter.

7. Color Temp.

Press (－) OR (＋)to adjust the color tones.

“ Cool , Warm , Normal “

8. DNR

Press (－) OR (＋)to adjust the noise reduction.

“High , Low, Off, Mid “

Note: VGA Mode －Contrast, Brightness, Color Temp., Auto Adjust.

Sound Mode

1. Volume

Press (－) OR (＋)to adjust volume level.

2. Mute

Press (－) OR (＋)to select sound “ Off, On ”.

OSD Control Function

1DU00L7B-A.1

Setting Mode

VGA Mode

1. Language

Press (－) OR (＋)to select language.

2. H. Position

Move the display picture left or right.

Press (－) OR (＋)to adjust the parameter.

3. H Zoom

Adjust the H-size of the display picture

Press (－) OR (＋)to adjust the parameter.

4. V Position

Move the display picture up or down.

Press (－) OR (＋)to adjust the parameter.

5. V Zoom

Adjust the V-size of the display picture

Press (－) OR (＋)to adjust the parameter.

6. Clock

Press (－) OR (＋)to adjust the parameter.

7. Phase

Press (－) OR (＋) to adjust the parameter.

8. Scale Mode

Adjust the V-size of the display picture

Press (－) OR (＋)to adjust “ Full, 16:9 ”.

9. Reset

Recall Default value.

Note: “ Clock” and “Phase ” setting only in VGA Mode

AV/HDMI Mode

1DU00L7B-A.1

PIP/POP Setup Mode

1. Multi Window

Press (－) OR (＋)to select “PIP, POP, Off ” mode.

2. Sub Source

Press (－) OR (＋)to select “AV, VGA” mode.

3. Size

Adjust the size of Sub Source window.

Press (－) OR (＋)to select “Large, Small ”

4. Position

Move the position of Sub Source window.

Press (－) OR (＋)to select “U L, B L, B R, U R” position.

5. Border Color

Choose the border color of Sub Source window.

Press (－) OR (＋)to select “Black, Blue” color.

6. Sound Source

Press (－) OR (＋)to select “Main, Sub” mode.

7. Swap

Press S/Select to Swap the Source of Main and Sub.

Note:

1. AV1 and AV2 cannot be displayed at the same time on the monitor in PIP / POP mode,

nor can HDMI and VGA be displayed together in PIP/POP mode. The Source must

always be one composite Video and the Sub- source may be either VGA or HDMI.

2. If POP mode is selected both images are scaled to fit the screen.

PIP

POP

1DU00L7B-A.1

Caring for your LED Monitor

Your VITEK LED color monitor is a sensitive piece of electronic

equipment. Proper care can prevent accidentally damaging the

LED panel or the monitor itself. By following these guidelines you can

ensure many years of trouble free use.

1. The LED monitor's plastic casing and LED glass panel can be

cleaned with a soft, lint-free cloth. Never use scrub pads or other

cleaning materials with abrasive surfaces to clean your LED

monitor!

a. For the plastic case, a mild detergent may be used to clean

the surface. However, you should ensure not to use too

much detergent or water as this could leak into the interior

of the casing.

2. Do NOT use cleaning fluids based on alcohol, methylated spirit, or

ammonia. The glass plate has a hard surface coating to prevent

scratches. However, the use of strong chemical cleaning agents

may damage this coating. Use only a mild soap or detergent and

water or specially formulated cleaners made for cleaning glass

panels.

3. Avoid direct contact with water or other liquids. Never use your

LED monitor in or around areas where water may pose a potential

hazard to normal operation.

4. Only use your LED monitor indoors, and avoid monitor contact

with oil, vapor, steam, moisture and dust. Your LED monitor should

be used in a clean and low humidity environment.

5. Keep your LED monitor away from heaters or other heat sources

such as lighting equipment or direct sunlight.

6. Do not touch the Screen of your LED monitor with any sharp

object such as your fingernail or a pencil etc.

WARNING: Any unauthorized modification to this product could result in the

revocation of the authorization to operate the equipment and void the

product warranty.

Caring for Your LED Monitor

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Monitor de Vitek

Vitek

Vitek VTM-14A Manual del propietario

Vitek

Vitek VT-SCT-U4 Manual de usuario

Vitek

Vitek VTM-TLM28P-4K Manual de usuario

Vitek

Vitek VTM-LCD203P Manual de usuario

Vitek

Vitek VTM-LCD193 Manual de usuario

Vitek

Vitek VTM-LCD194M Manual de usuario

Vitek

Vitek VTM-LCD173P Manual de usuario

Vitek

Vitek VTM-LCD202 Manual de usuario

Vitek

Vitek VTM-TLM191 Manual de usuario

Vitek

Vitek VTM-20 Manual del propietario

Vitek

Vitek VTM-101C Manual de usuario

Vitek

Vitek VTM-LCD203P Manual de usuario

Vitek

Vitek VTM-PV22 Manual de usuario

Vitek

Vitek VTM-LCD143 Manual de usuario

Vitek

Vitek VTM-LED220P Manual de usuario

Vitek

Vitek VTM-PV22I Manual de usuario

Vitek

Vitek VTM-LCD43-5A4 Manual de usuario

Vitek

Vitek VTM-12 Manual del propietario

Vitek

Vitek VTM-12 Manual de usuario

Vitek

Vitek VTM-LCD220P Manual de usuario

Vitek

Vitek Transcendent VTM-TLM241 Manual de usuario

Vitek

Vitek VTM-LCD174P Manual de usuario

Vitek

Vitek VTM-LCD351 Manual de usuario

Vitek

Vitek VTM-LCD561 Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación