Vitec Multimedia Autoscript WHC-IP A9009-0005 Manual de usuario
User Guide
EN
User Guide
Wireless IP Hand Control and Receiver
WHC-IP - WHC-REC
EN www.autoscript.tv
Wireless IP Hand Control and Receiver
2
Copyright © 2018
All rights reserved.
Original Instructions: English
All rights reserved throughout the world. No part of this publication may be stored in a retrieval system, transmitted,
copied or reproduced in any way, including, but not limited to, photocopy, photograph, magnetic or other record
without the prior agreement and permission in writing of the Vitec Group Plc.
Disclaimer
The information contained in this publication is believed to be correct at the time of printing. Vitec Production
Solutions Ltd reserves the right to make changes to the information or specications without obligation to notify any
person of such revision or changes. Changes will be incorporated in new versions of the publication.
We are making every eort to ensure that our publications are updated on a regular basis to reect changes to
product specications and features. Should this publication not contain information on the core functionality of your
product, please let us know. You may be able to access the latest revision of this publication from our website.
Vitec Production Solutions Ltd reserves the right to make changes to product design and functionality without
notication.
Trademarks
All product trademarks and registered trademarks are the property of The Vitec Group Plc.
All other trademarks and registered trademarks are the property of their respective companies.
Published by:
Vitec Production Solutions Ltd
Email: [email protected]
1
Contents
Safety.. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 2
Electrical Connection .. .. .. .. .. .. .. .. .. .. .. . 2
Mounting and Installation .. .. .. .. .. .. .. .. .. . 3
Water, Moisture and Dust.. .. .. .. .. .. .. .. .. . 3
Operating Environment ....................3
Maintenance................................3
Components and Connections .. .. .. .. .. .. .. . 4
Wireless IP Hand Control Receiver.. .. .. .. . 4
Wireless IP Hand Control.. .. .. .. .. .. .. .. .. . 5
Box Contents .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 6
Installation .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 7
Powering Up................................7
Operation.. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 8
Maintenance....................................10
Routine checks .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 10
Cleaning ........................................10
Technical Specication .. .. .. .. .. .. .. .. .. .. .. . 11
Troubleshooting .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 12
General Notices .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 14
2
Safety
Important information on the safe installation and operation of this product. Read this
information before operating the product. For your personal safety, read these instructions. Do
not operate the product if you do not understand how to use it safely. Save these instructions
for future reference.
Warning Symbols Used in these Instructions
Safety cautions are included in these instructions. These safety instructions must be followed to avoid
possible personal injury and avoid possible damage to the product.
!
WARNING! Where there is a risk of personal injury or injury to others, comments appear
supported by the warning triangle symbol. Where there is a risk of damage to the product,
associated equipment, process or surroundings, comments appear supported by the word
‘CAUTION’.
Electrical Connection
WARNING! Always disconnect and isolate the product from the power supply before
attempting any servicing or removing the covers.
!
CAUTION! The products must be connected to a power supply of the same voltage (V) and
current (A) as indicated on the product. Refer to the technical specications for the products
3
Safety
Mounting and Installation
!
WARNING! Always ensure that all cables are routed so that they do not present any
danger to personnel. Take care when routing cables in areas where robotic equipment is in
use.
Water, Moisture and Dust
!
WARNING! Protect the product from water, moisture and dust. The presence of electricity
near water can be dangerous.
!
WARNING! When using this product outside, protect from rain using a suitable waterproof
cover.
Operating Environment
!
CAUTION! The product should not be used outside the operating temperature limits. Refer
to the product technical specications for the operating limits for the product.
Maintenance
!
WARNING! Servicing or repair of this product must only be performed by qualied and
trained engineers.
4
A9009-0006 Wireless IP Hand Control Receiver
1
RJ45. Powered over Ethernet
Requires 3rd party PoE injector
or XBox-IP (not included)
2Data LED
3Link LED
4Factory Reset
5Status LED
Components and Connections
PoE
3
4
2
1
5
5
1Power / Sleep Button
2Status LED
3Joystick
4Button 1
5Button 2
6Battery Cover
7Battery Saver Tab
Components and Connections
A9009-0005 Wireless IP Hand Control
12
3
4
5
6
7
6
Box Contents A9009-0006 Box Contents A9009-0005
Components and Connections
1WHC-REC A9009-0006
2Quick Start Guide
1WHC-IP A9009-0005
1
2
7
Powering Up A9009-0006
Installation
1WHC-IP A9009-0005
Status LED
Flashing Blue: Powered and in
pairing mode
Solid Blue: Powered and paired
with WHC-IP
Status LED
Rapid Flashing Blue: Powered
and Pairing with WHC-REC
Slow Flashing Blue: Powered
and Paired with WHC-REC
PoE
The receiver is automatically powered up when the
PoE Ethernet cable Cat5 or Cat6 cable is attached.
Requires 3rd party PoE injector or
XBox-IP (A9009-0001 not included)
Powering Up A9009-0005
For rst use, pull out the
battery saver tab from the
battery cover.
Press any button to switch on.
(Replacement batteries 3V
CR1620)
8
Operation
1. Make sure the WHC-REC and WHC-IP are
both powered on. The status light on both
devices will ash.
2. The WHC-REC and WHC-IP will pair in a
range of up to 30 Feet in line of sight.
3. To pair the WHC-IP with the WHC-REC
press and hold button 2 (O)
4. When paired the WHC-REC status light will
show solid blue.
5. When paired the WHC-IP status light will
ash slowly.
The WHC-IP will perform the current functions
as default:
• Button 1: Short press: previous marker
• Button 1: Long Press: programmable
function
(See Device Conguration/General tab of WHC-
REC in WP-IP software application for options).
• Button 2: Short Press: next marker
• Button 2: Long press: enter pairing mode
To put the WHC-IP into sleep mode press and
hold the button on the top of the device for 2
seconds.
Notes:
The WHC-REC can only be paired and active
with one WHC-IP at any one time.
Where more than one WHC-IP are available
putting the connected WHC-IP into sleep mode
will then enable a dierent WHC-IP to pair with
the WHC-REC.
Similarly, when more than one WHC-REC are
used, if a connection is lost to one WHC-IP
and a second WHC-REC is in range it will
automatically pair with the available WHC-IP (if
it has been previously paired with that WHC-REC)
Sensitivity and dead band range can be
adjusted. (See Device Conguration/Speed
Prole tab of WHC-REC in WP-IP software
application for options).
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
