13
12
5. WEAR PROPER CLOTHING AND SHOESAT WORK PRODUCT.
Working screwdriver, wear tight clothes and fasten all the buttons. Wear
shoes with non-slip soles. For eye protection against ingress of chips when
drilling, wear special protective glasses. Hearing protection (in case such a
need) take care of headphones. If user operations generate dust or particles
of the material are separated, use a respirator.
6. DO NOTTOUCH THE ROTATING PARTS OFTHE PRODUCT.
Do not bring your hands, fingers and other body parts moving parts
screwdriver.
7. WHILE THE HARDTO HOLD THE DRIVER IN HAND.
8. WHEN WORKINGAT HEIGHTUSE LADDERS.
9. DO NOT FORCETHE MOTOR,ALTERNATING WORKAND REST.
10. AT DRILLING HOLES IN WALLS, CEILINGS AND FLOORS SURE
THAT THERE IS NO HIDDEN POINT DRILL ELECTRIC WIRING.
11. WHEN DRILLING HOLES SECURE ITS INTO THE WORKPIECE INA
VISE OR IN THE CLAMP.
12. MAKE SURE THAT WHILE DRILLING METAL CHIPS MISSES THE
VENTILATION OPENINGS PRODUCT.
13. WHILE NOT REMOVE HANDS SAWDUST, SHAVINGS, DUST AND
DIRT.
14. DO NOT TOUCH THE BAT, CAP OR DRILL WHEN MOTOR
SCREWDRIVERS, AND IMMEDIATELY AFTER DRILLING DETAILS -
PLACES TO DRILLINGAS PRESENT DANGER OF THERMAL BURNS.
15. DO NOTTIGHTEN THE FASTENERS IN MODE "DRILLING".
16. DO NOT FORCE THE TOOL SO THAT THE LOAD COULD NOT
STOPTHE MOTOR
17. USE ONLY IN THE GOOD WORKING BITS, BITS, BITS.
Do not use damaged or sharp bits, tools, drills, because it increases the
likelihood of injury.
SAFETY
4
4.1. IMPORTANT SAFETY INFORMATION
4.2. SAFETY OPERATION
Before using the screwdriver carefully read the safety regulations and
warnings given in this manual.
Most injuries during the operation of the product is the result of non-
compliance with the provisions of the basic safety rules. Injuries can be
avoided if strict safety precautions in advance and provide a potential danger.
Do not, under any circumstances, use a product in a manner or for
purposes not specified in this manual.
Improper handling or operation of an untrained person can cause an
accident.
1. DO NOT ALLOW PRODUCT FOR CHILDREN AND PERSONS WITH
DISABILITIES.
2. BE FULLY CONCENTRATE ON WORK.
Do not get distracted while working screwdriver, as this could cause loss of
control and cause injury of varying severity.
3. DO NOT START AND USE THE PRODUCT IN CASE OF ILLNESS, IN
THE STATE OF FATIGUE, DRUGS OR ALCOHOL, OR UNDER THE
INFLUENCE OF DRUGS POTENT DRUGS, REDUCES THE RATE OF
REACTIONANDATTENTION.
4. FOLLOW INTEGRITYANDTHE PRODUCT TO.
Do not start and use the product in the presence of damage to the insecure
parts and components.
CAUTION!
Do not let unprepared people to work with the product.
