VistaQuest VQ-PC310 Manual de usuario

User's Manual

020606

Contents Page

1. Package Includes ---------------------------------------------------------

2. Names of Parts --------------------------------------------------------------

3. How to Place the WebCam ---------------------------------------------

4. System Requirements ---------------------------------------------------

5. Specification ------------------------------------------------------------------

6. Installing Driver and Software ----------------------------------------

7. Checking Connection of Your Camera -----------------------------

8. Setting the Microphone --------------------------------------------------

9. Uninstalling Driver and Software -------------------------------------

10. Arcsoft PhotoImpression 5 -------------------------------------------

11. Arcsoft VideoImpression 2 ---------------------------------------------

-------------------------------------------------

12. Internet Video Conference -------------------------------------------

1. Package Includes

2. Names of Parts

•PC Camera

(with USB cable)

•User’s Guide

•CD Installation Disc

3. How to Place the WebCam

1.Stand Mode

Two ways to place the webCam for video conference are As the picture

shown below. You can swivel the lens to adjust to the proper angles.

2.Mount Mode

As shown on the right, the way to place the

webCam is suitable for the laptop and LCD

monitor user.

4. System Requirements

• Personal computer, laptop, desktop, or IBM compatible with Pentium 166 MHz

minimum, and with an active USB (Universal Serial Bus) port.

• Windows 98 SE / ME / 2000 / XP, CD ROM drive, color monitor, mouse and

keyboard.

• For video conference, your computer must have modem and communication

software for Internet connection.

5.Specification

Interface: USB Port (Universal Serial Bus)

Image Sensor: 1/4" color progressive CMOS, 640 x 480 pixels,

10bit RGB raw data

Lens: F2.8, f=4.9mm

Frame Rate (Max.): 640x480@20 fps, 320x240@30 fps, 160x120@30

fps

Focus Range: Manual focus, 10cm to infinity

Exposure Control: Automatic

Color Balance: Automatic

Video Capture Res.: 640x480,352x288, 320x240, 176 x144, 160x120

Still Image Capture Res.:

Up to 640x480

Snap Shot Button: Hardware

Video Format AVI

Flicker Control: 50Hz and 60Hz

Power: Powered form USB port

Software Compatibility: TWAIN / VFW / Directly Show Driver, Windows 98

SE / ME / 2000 / XP

6. Installing Driver and Software

• Installing Driver

1. Turn on the computer.

2. Insert installation CD into the CD-ROM drive

and the installation CD menu will appear.

3. When you see the following screen, choose

“Install Driver”.

4. Follow the on-screen instructions.

5. Restart the computer.

• Installing Software

1. Insert installation CD into the CD-ROM drive and the installation CD menu

should appear.

2. When you see the following screen, choose “ArcSoft Software Suite” to

install the software.

3. Follow the on-screen instructions.

4. The installed software will automatically create “PhotoImpression 5” or

“VideoImpression 2” shortcut icons on your desktop.

7. Checking the Connection of Your Camera

Plug the camera’s USB cable into your camera then

to the computer's USB Port.

For Windows 98 SE/Me only:

• Double click “My Computer” icon ->

Control Panel -> System -> Device Manager

-> Imaging Device; when you see

" USB 2.0 PC CAMERA " that means

now the camera is installed.

For Windows 2000/XP only:

• Double click “My Computer” icon

(Windows 2000) or go to Start Button and

select “My Computer” (Windows XP) ->

Control Panel -> System -> Hardware ->

Device Manager -> Imaging Device; when you

see " USB 2.0 PC CAMERA " that means now the camera is installed.

8. Setting the Microphone

The microphone of the camera works independently from the sound card.

1. Insert the plug of PC camera to a

computer sound card at front/rear to the

corresponding symbol (normally in pink).

2. Double click the icon from the task

bar and you will see the menu as below.

Note: Do not tick on Mute option.

3. Click properties from the menu Option and you will see the dialog box as

below; tick on microphone option.

4. Adjust the microphone on the PC camera close to your mouth, then start

using.

9. Uninstalling Driver and Software

For Windows 98 SE / ME / 2000:

•Uninstalling Software

1. Click "Start" from the task bar and choose ”Setting”.

2. Choose "Control Panels" and Double click "Add/Remove Programs".

3. Select the program to be uninstalled " ArcSoft Software Suite ".

4. Click on "Remove Program" and follow the instructions on screen.

•Uninstall Camera's Driver

1. Click "Start" from the task bar and choose ”Setting”.

2. Choose "Control Panels" and Double click "Add/Remove Programs".

3. Select the program to be uninstalled " USB 2.0 PC CAMERA ".

4. Click on "Remove Program" and follow the instructions on screen.

For Windows XP:

•Uninstalling Software

1. Click "Start" from the task bar and choose "Control Panels".

2. Double click "Add or Remove Programs".

3. Select the program to be uninstalled " ArcSoft Software Suite "

4. Click on "Remove" and follow the instructions on screen.

•Uninstall Camera's Driver

1. Click "Start" from the task bar and choose "Control Panels".

2. Double click "Add or Remove Programs".

3. Select the program to be uninstalled " USB 2.0 PC CAMERA ".

4. Click on "Remove Program" and follow the instructions on screen.

10. Arcsoft PhotoImpression 5

ArcSoft PhotoImpression 5is a complete digital

image editing application designed with real people

in mind. Easy-to-use “Getting Start” guides,

user-friendly UI, complete image editing functionality,

give users wonderful experience to organizing,

viewing, enhancing, editing, printing and sharing

photos.

Click “Start”“Program”“ArcSoft Software Suite““PhotoImpression 5” to

launch PhotoImpression 5 or double click PhotoImpression 5 icon on the

desktop and you will see a window as the screenshot above.

Select the picture source. For example: 1. Click “Folder” for acquiring

photos from your computer 2. Select the file path. 3. You can start editing them.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara web de VistaQuest

VistaQuest

VistaQuest PC130B Manual de usuario

VistaQuest

VistaQuest PC30I Manual de usuario

VistaQuest

VistaQuest PC Camera PC130 Manual de usuario

VistaQuest

VistaQuest PC310 Manual de usuario

VistaQuest

VistaQuest VQ PC100 Manual de usuario

VistaQuest

VistaQuest PC100 Manual de usuario

Manuales populares de Cámara web de otras marcas

Digitus

Digitus DA-70815 Manual de usuario

Logitech

Logitech C510 Manual de usuario

D-Link

D-Link DCS-5025L Manual de usuario

BTC

BTC PC160S Manual de usuario

Philips

Philips SPC715NC Manual de usuario

Trust

Trust 12440 Manual de usuario

FS FC270S Manual de usuario

Adesso

Adesso CyberTrack V10 Manual de usuario

MAGINON

MAGINON M-Cam 1 Manual de usuario

RoboCam

RoboCam SPARK Manual de usuario

Logitech

Logitech C170 Manual de usuario

Real-El

Real-El FC-225 Manual de usuario

Logitech

Logitech TV Cam Manual de usuario

Gigaware

Gigaware 25-1176 Manual de usuario

birddog

birddog EYES P200 Manual de usuario

Dicota

Dicota Contact Manual de usuario

Afidus

Afidus ATL-200 Manual de usuario

Connectland

Connectland CAM-CNL-C119 Manual de usuario