Vista Simplicity Rechargeable Motorization Manual de usuario
WOOD & FAUXWOOD BLINDS |
Simplicity Rechargeable Motorization
Quick Start Guide
Your blind has come pre-programmed from the factory. Follow these easy steps to get started.
1. Mount the blind. 2. Your blind is now ready!
Select the programmed channel and use the
UP and DOWN arrows to operate the blind.
For more in depth motorization programming instructions, please visit vistaproducts.com/guides
Setting/Using a Favorite Position
Make sure there is only one blind programmed to the channel when setting a Favorite position.
If more than one blind is set, please see UNLINK A BLIND in the Simplicity guide at vistaproducts.com/guides.
1. Using the UP and DOWN arrows,
move the blind to the desired
Favorite position.
2. To save the Favorite position, hold the
LIMIT button and hold the UP button at the
same time. Release after a series of short beeps.
3. Press the STOP/FAVORITE button to
move the blind to the set Favorite position.
NOTE: Make sure blind is fully stopped
before using the Favorite position.
For more in depth motorization programming instructions, please visit vistaproducts.com/guides 7/19K2190
6 CHANNEL TIMER REMOTE |
Simplicity Rechargeable Motorization
Quick Start Guide
Your shade has come pre-programmed from the factory. Follow these easy steps to get started.
2. Mount the shade. 3. Your shade is now ready!
Press the AUTO/MANUAL button until the display
shows ‘Manual’. Select the programmed channel and
use the UP and DOWN arrows to operate the shade.
Setting Time and Day
Make sure the remote is in ‘Manual’ mode. Press the AUTO/MANUAL button until ‘Manual’ appears on the screen.
1. Push and hold the LIMIT button.
While holding the limit button, push the
AUTO/MANUAL button for 3 seconds
and release. e hour digits will ash.
2. Use the UP and DOWN buttons to set the
current hour. Press the CHANNEL button to
conrm hour and advance to minutes.
NOTE: Time is in 24 hour format.
3. Repeat step 2 for minutes and day.
Once time and day are set, hold the AUTO/
MANUAL button for 3 seconds. Display will
ash and then display current time and day.
1. Connect the motor and battery
in the headrail (as shown).
Connect
Otros manuales de Persiana de ventana de Vista
Vista
Vista AUTOMATE ARC Manual de usuario
Vista
Vista Simplicity Roller Shades Manual de usuario
Vista
Vista PowerWand Manual de usuario
Vista
Vista Simplicity Cellular Shades TDBU Manual de usuario
Vista
Vista Simplicity Cellular Shades Manual de usuario
Vista
Vista Simplicity ROLLER SHADES Manual de usuario
Manuales populares de Persiana de ventana de otras marcas
Domondo
Domondo PureNight Manual de instrucciones de instalación
rollease acmeda
rollease acmeda Easy Spring Air Guía de configuración
IKEA
IKEA KADRILJ Manual de usuario
Hallis Hudson
Hallis Hudson Rolls Super glide Manual de usuario
Benthin
Benthin P1614 Manual de usuario
MV LINE
MV LINE CLARA 015 Manual de instrucciones
