Vista Viper Manual de usuario
1
VIPER
Quick User Guide
2
Please read this manual thoroughly before use and keep it handy for future reference.
3
Contents
1. Overview......................................................................................................................................... 1
1.1 DVR Description........................................................................................................................ 1
1.2 DVR power up........................................................................................................................... 1
1.2.1 Login........................................................................................................................... 1
2. Live Screen Configuration 2
2.1 Icons in Live screen................................................................................................................... 3
2.2 Live Launcher menu .................................................................................................................. 4
2.3 Quick menu............................................................................................................................... 5
2.4 Camera selection ....................................................................................................................... 6
2.5 PTZ camera control .................................................................................................................... 7
3. Search/Playback 8
3.1 Search...................................................................................................................................... 8
3.2 Playback................................................................................................................................... 9
3.3 Backup ( Archive) .................................................................................................................... 10
VIPER Quick userguide V1.0 1
1. Overview
1.1 DVR Description
No.
Name
Function
1
Power status LED
Power indication ON/OFF
2
Recording status
LED
Status of recording
3
Network LED
Illuminated if Network connected
4
USB port
USB port is connected for USB mouse or firmware upgrade, and data
back-up.
1.2 DVR power up
When the NVR is powered up, it will take a couple of minutes to boot, the following icons will be displayed in
order as it goes through it’s booting cycle
When the boot up process is completed a buzzer will sound and the start up screen will be displayed.
1.2.1 Login
In Log in screen, enter the ID, Password and press OK.
Note
Default ID & Password is admin/admin
1 3 42
VIPER Quick userguide V1.0 2
2. Live Screen Configuration
No.
Item
Description
1
Set up menu
Setting menu is located at the top of the screen (Admin only)
2
Live screen
Shows live video of connected cameras.
3
Launcher menu
Launcher menu is located at the bottom of the screen.
4
Quick menu
Clicking the right button of a mouse displays Quick menu.
VIPER Quick userguide V1.0 3
2.1 Icons in Live screen
Each icon in the live screen displays a present setting status or a function. UI screen consists of like below.
Note
Chosen live screen is marked as a blue frame; mouse-located live screen is marked
as yellow one.
No.
Icon
Description
1
CH1 CAM1
Channel numbers and camera titles
2
A camera with PTZ function
PTZ control function in process
Recording in alarm event mode
Recording in motion event mode
Recording in panic recording mode
Recording in consecutive recording mode
3
Video loss icon
4
Mic ON/OFF
Speaker ON/OFF
6
Displaying present time and date
VIPER Quick userguide V1.0 4
2.2 Live Launcher menu
This section describes Launcher menu in the bottom of the screen.
Figure 2-1 Launcher menu
Table 2-1 Launcher menu Item and Description
No.
Item
Description
1
Log in/out status and logged in ID
2
Date & Time
Displaying present date and time
3
HDD
Displaying HDD capacity in use
4
Moving to previous/next partition screen
5
Displaying live screen in order set (toggle)
6
Selecting partition mode to mark in live screen (single screen, 4-, 9-, and 16-
partition)
7
Stopping or replaying selected live screen images (toggle)
8
Audio on or mute chosen live screen(toggle)
9
Capturing channels users want
10
Bookmarking with date and time users want
11
Make a backup video of users want.
12
Searching recording data (time, event, and thumbnail).
13
Playing recorded data
14
Starting immediate recording of selected channel
15
Locking or releasing launcher menu (toggle)
VIPER Quick userguide V1.0 5
2.3 Quick menu
This section depicts Quick menu when users click the right button of the mouse in live screen.
No.
Item
Description
1
Screen Mode
Selecting the partition mode of live screen (Full, 2X2, 3X3, and 4x4).
2
Zoom in
Magnifying selected live screen (Zoom out, 2 times, 4 times, and 8 times).
3
Freeze
Stopping or replaying selected live screen images (toggle)
4
Speaker
OUTPUT/Mute
Turning on/off a sound speaker
5
PTZ Control
Controlling PTZ Function
6
Stop Alarm
Stopping monitoring alarm output and event
7
Spot Mode
Set the output mode of a spot monitor (Auto, Full, and 4x4).
8
Playback
Playing selected live screen images (before 30 sec, 1 min, 5 min, 10 min,
30 min, 1-hour, Go to last play time, and Go to last record time)
9
Search
Searching recording data (time, event, thumbnail, and text).
10
Backup
Backup video users want.
11
Setup
Opening setting menu pop-up. For more information about setting menu,
see section “0Camera selection
Individual cameras or multi screen modes can easily be
selected using the Mouse.
1. Selecting a single camera from a multi screen display
To select a single camera from any multi-screen view, simple
hover the mouse over the required camera and double click on
it’s image. This will display the selected camera in full screen
view.
To return to the same multi-screen view, double click on the full
screen image.
VIPER Quick userguide V1.0 6
2. Automatic sequencing of cameras
To start an automatic sequence of camera images.”
12
Status
Opening a pop-up displays device system log, event, and recording status
(system log, event, and save)
13
Log in/Log out
Log in/Log out
14
Shutdown
Unplugging or restarting the device (shutdown, restart).
VIPER Quick userguide V1.0 7
2.4 Camera selection
Individual cameras or multi screen modes can easily be selected using the Mouse.
1. Selecting a single camera from a multi screen display
To select a single camera from any multi-screen view, simple hover the mouse over the required camera and
double click on it’s image. This will display the selected camera in full screen view.
To return to the same multi-screen view, double click on the full screen image.
2. Automatic sequencing of cameras
To start an automatic sequence of camera images, select the sequence icon on the Launcher menu at the
bottom of the screen:
3. Selecting different multi-screen views
To select different multi-screen viewing options select the screen icon on the Launcher menu at the bottom of
the screen:
4. Manual stepping through cameras or multi screen views
To manually select different cameras or multi-screen views select the left or right arrows on the Launcher menu
at the bottom of the screen:
Otros manuales para Viper
1
Tabla de contenidos
Otros manuales de Hardware de red de Vista
Manuales populares de Hardware de red de otras marcas
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manual de usuario
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manual de usuario
Yudor
Yudor YDS-16 Manual de usuario
D-Link
D-Link ShareCenter DNS-320L Manual de usuario
Samsung
Samsung ES1642dc Instrucciones de uso
Honeywell Home
Honeywell Home LTEM-PV Instrucciones de montaje
