VisionStat MA-BCKS-7.0 Instrucciones de uso

MA-BCKS-5.6 Models

MA-BCKS-7.0 Models

Installation & User Manual

Please read this manual thoroughly before operating the device

and keep this document for future reference

VisionStat®

5.6” and 7.0” Wired Video Monitoring Systems

www.mobileawareness.com

Mobile Awareness

Mobile Awareness, LLC VisionStat® Manufacturer’s Limited Warranty

1-Year Limited Warranty

(Revised 6/2010)

Limited Warranty

VisionStat™Limited Warranty Mobile Awareness warrants to the original end-user purchaser that

a new VisionStat™ Color Camera System is free from structural defects in material and

workmanship and agrees, without charge, to repair or replace any part(s) which fails in normal use

and service because of structural defects in material and workmanship. The VisionStat™ system is

warranted to the original end-user purchaser for (1) one year from the date of purchase. Proof of

original ownership shall be evidenced by invoice or bill of sale in the name of the original end-user

purchaser. This warranty is not transferable. Warranty Limitations: Mobile Awareness does not

warrant and will not repair or replace or make adjustment with respect to any VisionStat™ system

that has been subjected to misuse or abuse, including the following: a) Not following the guidelines

expressed in the Installation Guide ; b) Intentional mis-use or mis-application; c) Changing the

original condition of the VisionStat™ system by alteration or by subjecting it to any processing such

as welding or straightening; e) Accidents, abnormal or severe operating conditions including,

without limitation, fires, or driving during seizures or with a flat tire; f) Failing to follow maintenance

and other instructions and warnings periodically set forth by Mobile Awareness, Recommended

maintenance includes, without limitation, periodic cleaning and inspection for damage; g) This

warranty is void if the original invoice or sales receipt is not available for verification, or upon

transfer of title on any products by the original purchaser. THERE IS NO WARRANTY THAT THE

VisionStat™ SYSTEM SHALL BE MERCHANTABLE OR SATISFACTORY FOR ANY

PARTICULAR PURPOSE. NOR IS THERE ANY OTHER WARRANTY, EXPRESS OR IMPLIED,

EXCEPT SUCH AS IS EXPRESSLY SET FORTH HEREIN. MOBILE AWARENESS, LLC SHALL

NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR ANY BREACH

OF WARRANTY, ITS LIABILITY AND THE PURCHASER’S EXCLUSIVE REMEDY BEING

LIMITED TO REPAIR OR REPLACEMENT OF THE VisionStat™ SYSTEM AS STATED IN THIS

LIMITED WARRANTY. Please refer to Mobile Awareness standard Terms and Conditions.

Customer must notify Mobile Awareness within 10 days of discovering the defective product or part

and provide a description of the defect and complete information about the manner of its discovery.

Repair or replacement will be handled by a Mobile Awareness representative. This warranty gives

you specific legal rights. You may have additional rights covered under applicable laws.

This limited warranty should be used in conjunction with the VisionStat™ Installation Manual

(“Installation Manual”). The Installation Manual contains important safety information and warnings,

and failure to read and understand this information may result in serious injury or death. If you do

not have copies of the Installation Manual you may obtain copies free of charge along with other

specification literature by contacting Mobile Awareness at (866) 653-5036 or the address below:

Mobile Awareness, LLC

31200 Solon Road, Suite 12

Solon, OH 44139

www.mobileawareness.com

Limitation of Liability.

(a) Seller’s liability and Buyer’s exclusive remedy for any tender of nonconforming or defective

goods or breach of warranty is expressly limited to Seller’s choice of: (i) the repair of non-

conforming or defective goods; (ii) the replacement of non-conforming or defective goods with

conforming goods at the FOB point of shipment; or (iii) the repayment of that portion of the

purchase price represented by non-conforming or defective goods.

(b) In no event will Seller be liable for any incidental, consequential, indirect, special, contingent, or

punitive damages arising out of or relating to: (i) any breach of contract or warranty, tort (including

negligence and strict liability), or other theories of law with respect to products sold or services

rendered by Seller, or undertakings, acts or omissions relating thereto; (ii) the tender of defective

or non-conforming goods; (iii) breach of any other provision of this agreement; or (iv) any claim of

any kind arising out of or relating to any order or Seller’s performance in connection therewith. In

any event, Seller’s liability will not exceed the purchase price of the goods on which such liability is

based. Buyer assumes all other liability for any loss, damage or injury to persons or property

arising out of, connected with or resulting from the use of Seller’s products, either alone or in

combination with other products.

VisionStat 5.6” and 7.0” Wired Video Monitoring Systems

Contents of Manual

1. Product Overview, Product Features, Product Specifications………………..….…..5

2. VisionStat Package Contents, Optional Items and Accessories........………............6

3. About the Monitor.....................................................................................................6

4. About the Cameras...............................................................................................…7

5. Installation: Monitor and Wiring Harness..................................................................7

6. Installation: Cameras................................................................................................9

7. Menus.....................................................................................................................11

8. Maintenance & Troubleshooting.............................................................................12

9. Backing Safety Suggestions...................................................................................13

Precautions

GENERAL SAFETY INFORMATION

All Mobile Awareness, LLC products are strictly intended to be installed as a supple-

ment and are not intended for use as substitutes for vehicle side/rear-view mirror de-

vices, or for any other standard motor vehicle equipment required to be installed on

vehicles by law. Objects in Camera/Monitor view are closer than they appear. When

backing up, proceed cautiously and be prepared to stop. This product is no substitute

for proper attention and defensive driving techniques, observances of traffic laws and

motor vehicle safety regulations.

WARNING

It is unlawful in most jurisdictions for any person(s) to drive a motor vehicle equipped

with a television viewer/screen located at any point forward of the back of the driver’s

seat (or in any location that is visible, directly or indirectly), to the driver while operating

the vehicle. In any installations where such products are used to display television

broadcasts or recorded video playback, installation location must adhere to applicable

laws and regulations.

TAMPERING

To prevent electrical shock, DO NOT OPEN THE MONITOR CASE OR ANY OTHER

ENCLOSED ELECTRONIC PRODUCT. There may be potentially harmful voltages

inside these enclosed products. There is no user serviceable parts inside any of the

products provided by Mobile Awareness, LLC. If tampering is detected, the warranty

will become void.

CAUTION

To avoid damage to electronic circuit, stop using this product while doing welding work

to the vehicle and/or trailers. Never immerse any component in water and do not em-

ploy spray cleaners. When cleaning, use a damp lint-free cloth only. Never connect

this unit to other devices that may be incompatible as it may void the warranty if harm

is caused.

LIABILITY DISCLAIMER-USE OF PRODUCT

The system is designed and intended as a warning aid for vehicle backing and parking

and it should only be used as such. No warranty as to operational efficiency is granted.

In no event shall Mobile Awareness, LLC be liable for consequential, incidental or spe-

cial damages or for installation, adjustment , or other expenses, which may arise from

the use of this product. Mobile Awareness, LLC shall in no event be liable for any di-

rect or indirect damages, including personal injury or death, resulting from errors that

occur in the use of this product, irresponsible acts, unsafe driving or negligence.

Mobile Awareness

Storage and Keeping

1. Do not expose the Monitor, Cameras or other equipment to excessive heat or cold.

Please read and follow the technical specifications provided in this manual.

2. Never use the device near a bathtub, wash basin, kitchen, damp basement, swim-

ming pool or similar places.

3. Never use the device in environments with excessive moisture, dust or smoke.

4. Avoid dropping or striking the device.

5. Avoid using the device in enclosed spaces, areas with excessive vibration or sub-

ject to severe impacts.

6. Never puncture, scratch or use abrasive cleaning materials on device.

7. Do not place cables where they may be pinched or stepped on.

8. Leave at least a 2” space between the Monitor and walls, cabinets or other objects

to allow adequate air circulation around the device.

9. The Monitor is not designed to be waterproof.

Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the follow-

ing two conditions.

1. This device may not cause harmful interference.

2. This device must accept any interference re-

ceived, including interference that may cause

undesired operation.

Design and specifications are subject to change without notice.

Visit www.mobileawareness.com for supplemental information.

VisionStat 5.6” and 7.0” Wired Video Monitoring Systems

Power Input 10~32VDC

Power Consumption 5.6” Model: 416mA

7.0” Model: 500mA

Resolution 5.6” Model: 640 x 480

7.0” Model: 800 x 480

Operating Temp -20°C to +70°C

Storage Temp -30°C to +80°C

Dimensions

5.6” Model: 145mm (W) x 136mm (H) x 31.5mm (D)

5.7” (W) x 5.35” (H) x 1.24 “ (D)

7.0” Model: 182mm (W) x 122mm (H) x 26mm (D)

7.17” (W) x 4.80” (H) x 1.02” (D)

Weight 5.6” Model: 1.6kg (3.5 lbs)

7.0” Model:1.7kg (3.7lbs)

Product Specifications

VisionStat is an advanced family of wired and wireless Video Monitoring Systems.

Featuring high-quality 5.6” and 7.0” Digital Color LCD Monitors, VisionStat Video Moni-

toring Systems can be configured for up to four (4) ruggedized infrared night vision

CCD Cameras with multiple mounting options. These infrared, waterproof (IP68 rated)

Cameras were designed specifically for front, side and rear viewing applications pro-

ducing high-resolution images with a precise field of view. All control electronics are

built into the Digital Color LCD Monitors, making VisionStat systems easy to operate.

All VisionStat Monitors, Cameras and accessories are interchangeable, using the

same rugged interconnect cable system, providing a complete and reliable solution to

help limit vehicle blind spots and avoid costly accidents.

The VisionStat Wired Video Monitor System contains a high quality TFT LCD Color

Monitor that is easily installed by mounting on the dash, in the dash or on the wind-

shield (utilizes adjustable universal mounts). For added safety and convenience, the

Monitor contains an audio speaker that can be utilized with the rear and side view

Cameras, when applicable.

Central to this video system is the 18-LED (infrared for night vision) industrial grade

rear view Camera. It can be configured to switch on automatically when the vehicle is

placed in reverse. The LED illumination is automatically controlled by a built in light

sensor. The Camera also contains a built in microphone to further aid the driver with

audio from behind the vehicle. The rugged high-resolution image CCD Camera is con-

structed of a metal allow shell, designed to be waterproof for vehicle applications.

Side Cameras are available for applications that require clear coverage of side blind

spots. The Side Cameras are low profile, infrared, industrial grade and angle modifia-

ble. They can be adjusted similar to a mirror for best driver visibility and configured so

that the image appears on the screen when the driver uses the Left or Right Turn Sig-

nal.

Exclusive capabilities include waterproof interconnects, an integrated control system

and support for up to 4 Cameras.

Product Features

Product Overview

Mobile Awareness

VisionStat Wired Package Contents (Hardware)

 Monitor

 5.6” Wired Monitor (P/N: MA-LCDS-5.6)

 7.0” Wired Monitor (P/N: MA-LCDS-7.0)

 Camera(s) with Mounting Bracket(s)

 18IR Wired Camera (P/N: MA-BCS-IR18)

 Wired Side Camera (P/N: MA-SMS-IR9)

 22-pin Wiring Harness (P/N: MA-AC-22PF)

 4-pin Extension Cable(s)

 “U-Bracket” Mount and Thumb Screws

 Dash Mount Bracket

 In Dash Flush Mount and Removal Tool

 Sun Shield

 Remote Control

Optional Items and Accessories

 VisionStat™ Truck & Trailer Interconnect System

 One Camera (P/N: MA-BCKS-TTC7)

 Up to Four Cameras (P/N: MA-BCKS-4CTTC7)

 4-pin Extension Cables

 5M (P/N: MA-EC-405)

 10M (P/N: MA-EC-410)

 20M (P/N: MA-EC-420)

 4 Channel DVR (P/N: MA-DVR4-SD)

 Quad Touch Screen Monitor (P/N: MA-LCDS-7.0QT)

 Various Cameras

 VisionStat Plus ECU and Back-Up Sensors Upgrade (P/N: MA-ODSS-4M17V)

Please visit www.mobileawareness.com for all options, accessories and additional information.

About the Monitor

The VisionStat Wired Monitor is a colored TFT LCD Monitor with a wide angle view and

a high resolution display. It supports both PAL and NTSC formats and the menu is

available in 8 languages. The buttons are equipped with automatic backlighting. The

Monitor can support up to 4 Cameras and can automatically switch to a specific Cam-

era view via the trigger wires. The Monitor also includes a built in speaker and a full

function remote control.

The VisionStat Wired Monitor is available in two sizes, 5.6” and 7.0”.

Fig 2: 7.0” Wired Monitor

Fig 1: 5.6” Wired Monitor

VisionStat 5.6” and 7.0” Wired Video Monitoring Systems

Installation: Monitor and Wiring Harness

The standard Camera issued with the system is the 18IR

Camera which has a 120 degree viewing angle and is

rated IP68. This Camera comes equipped with 18 infrared

LEDs to provide night vision up to 12 meters. It is

mounted on a “U-Bracket” which allows the user to angle

the Camera up or down.

The Side Camera is typically featured in triple Camera

systems. This Camera comes equipped with 9 infrared

LEDs to provide night vision up to 8 meters. The

mounting bracket and protective cover is included with the

Camera.

For other Camera options and information, please visit

www.mobileawareness.com.

About the Cameras

Fig 3: 18IR Camera

Fig 4: Side Camera

Before installing the system, it is recommended to temporarily

connect all components and perform a system

function check. If the system does not operate

properly, see the troubleshooting section of this

manual. If further questions arise, please visit

www.mobileawareness.com or contact Mobile

Awareness directly.

The Monitor can be flush mounted in the dash

(with the included mount), with the “U-Bracket” and

thumb screws (see figure 4) or via the Dash Mount

Bracket (see figure 5). Make sure the mounting

location does not obscure the drivers viewing area.

Note: For other mounting options, please visit

www.mobileawareness.com

Fig 5: U Bracket and Thumb Screws

The VisionStat system includes a 22-pin wiring harness. This wiring harness will power

the entire system, including the Monitor and up to 4 Cameras. Once the Monitor is

mounted, align the Monitor’s 22-pin

connection with the 22-pin connection of

the wiring harness. Each connector will

have an arrow to assist with the

alignment.

Once engaged, slowly rotate the metal ring to thread the two connectors together. This

should be done with caution so that the connectors seat and thread together properly.

You may need to continue pressing the connectors together while rotating the metal

ring to facilitate the assembly. Following these steps will ensure the connection has

been made correctly. Failing to do so may cause problems with power, audio and

video connections. Twisting the cable, or the connectors themselves, to tighten the

connection may result in breakage of the pins and their connections, rendering the

wiring harness defective.

Fig 6: Dash Mount Bracket

Fig 7: 22-pin Wiring Harness

Mobile Awareness

Installation: Monitor and Wiring Harness (Continued)

Before applying power to the system; make any Camera and trigger wire connections.

The 22-pin wiring harness’ wiring connections can be seen in the chart below. The

RCA connectors can be used to connect a second Monitor to the system for secondary

viewing. White 4-pin Male Connection Camera/Channel 1

Blue 4-pin Male Connection Camera/Channel 2

Brown 4-pin Male Connection Camera/Channel 3

Green 4-pin Male Connection Camera/Channel 4

Red Wire +12-32VDC

Black Wire Ground

White Trigger Wire Trigger Wire for Channel 1

Blue Trigger Wire Trigger Wire for Channel 2

Brown Trigger Wire Trigger Wire for Channel 3

Green Trigger Wire Trigger Wire for Channel 4

Yellow RCA Video Output

White RCA Audio Output

The trigger wires can be used to achieve hands free operation for the VisionStat

system. For example, wiring the BLUE Trigger Wire to your right turn signal will

automatically toggle the Monitor to Channel 2 once the BLUE Trigger Wire receives

+12VDC. Once power is removed from the trigger wire, in this case the turn signal

being turned off, the Monitor will revert to the previous channel being displayed.

The most common use of the trigger wires, along with the turn signals, is using the

BROWN Trigger Wire to toggle the Monitor to Channel 3 to view the rear back up

Camera while in reverse, typically wiring it to the reverse lights. Keep in mind, the

desired Camera must be connected to the corresponding color.

Fig 8: 22 Pin Wiring Harness

VisionStat 5.6” and 7.0” Wired Video Monitoring Systems

Installation: Cameras

Each Camera will have a 4-pin connection and be connected to the Monitor’s 22-pin

wiring harness via an extension cable. The extension cables come in lengths of 5M,

10M and 20M. The length of the cable used

should be determined by the length of the

vehicle, including any passageway or route

you take through the vehicle’s body to

ensure a safe and secure connection.

Select a location to mount the Camera(s)

that allows for unobstructed viewing of the

area under consideration. It is important to

position the Camera so there is adequate

visibility without creating unrealized blind

spots. To aid in this effort, have an assistant

hold the Camera in the desired mounting

location while temporarily powering the system. This

will help ensure that the desired viewing area is

visible prior to mounting the Camera(s).

Most commercial vehicles are exposed to vibration

and other harsh impacts. Install the Camera in a

location where it will be secure. Take the necessary

measures to reinforce and securely support the

Camera if it will be exposed to uncommon amounts of

stress and/or vibration. It is suggested that the

Camera be mounted as high as possible to prevent

blind spots that result from it being installed too low to

the ground. Cameras installed low to the ground also

expose the lens to more dirt, mud, exhaust gasses,

etc.

The VisionStat wired system uses a series of 4-pin connections to connect the Camera

to the Monitor’s wiring harness. It is important that these connections are aligned

properly, using the arrows printed on the outer shell. Once the connection is pushed

together, the user should tighten the fastener and pull the rubber sleeve over for added

protection and to prevent loose connections.

NOTE: If using a truck and trailer, or

other two vehicle configuration, the

Truck & Trailer Interconnect will need to be used. This interconnect system is available

in both 1 camera and 4 camera versions. You will need to use the interconnect with

enough connections to support all cameras on the trailer or rear vehicle.

Fig 9: 18IR Mounting Bracket

Fig 10: 4-pin Connection

Fig 11: Examples of running the extension cables

Fig 11: Extension Cable Paths

Mobile Awareness

Installation: Cameras (Continued)

If the Camera cable will run through the

vehicle body (see Figure 12), drill a 20mm

hole in order to pass the 4-pin connection

through. Once this connection is made, it may

be placed inside the vehicle body for

additional protection. The rubber grommet on

the Camera’s cable can be used to plug the

20mm hole. Seal the hole properly with

waterproofing compound, as well as

anywhere cables run through openings in the

vehicle body.

The Camera can be angled by loosening the

6 hex screws, 3 on each side, of the Camera.

Once the desired angled is achieved,

retighten the 6 hex screws to secure the Camera.

Once you have determined the most

effective mounting location, remove

the Frame Release Screws (2 each)

that hold the cover onto the Side

Camera Frame. Place the included

Rubber Insulating Pad in the

location where you plan to mount

the Camera and use it as a template

to mark and drill the (4 each)

mounting holes. Follow by drilling

the hole to pass the 4-pin Camera

cable connector through the vehicle.

Connect the included extension cable

(s) prior to mounting the Camera to

the Side Camera Frame. This will

allow you to thread the metal

connectors together, tighten them

securely and then slide the rubber

boot completely over the mated

connectors. This will assure a

watertight and trouble free connection.

When connecting to the Wiring

Harness, the left side Camera should

be connected to the WHITE Channel

One 4-pin Connector and the right

side Camera to the BLUE Channel

Two 4-pin Connector, via the included

extension cables.

Fig 12: Hex Screws on Side Camera

Installation: Side Cameras

Fig 13: Side Camera Mounting Bracket

Fig 14: Side Camera Mounting Bracket

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación