Visionhitech VC58FHD Manual de usuario
1
Version 1.1.0
Release Date : Feb. 24, 2011
Full HD CCTV Box camera
I
IN
NS
ST
TR
RU
UC
CT
TI
IO
ON
N
M
MA
AN
NU
UA
AL
L
Model : VC58FHD
Power option
z12VDC
z12VDC/24VAC
2
Version 1.1.0
Release Date : Feb. 24, 2011
Dear Customers!
By selecting this product, you have decided to use a professional device that guarantees
highest quality and reliability. We would like to thank you very much for your confidence and
kindly ask you to read the following instructions carefully before Installation and operation in
order to take full advantage of all quality features regarding this product.
The lighting flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
WARNING – Changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.
CAUTION – To prevent electric shock and risk of the fire hazards:
Do NOT use power source other than that specified.
Do NOT expose this appliance to rain or moisture.
CAUTION
RISK OF ELECTRIC
SHOCK
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE COVER (OR BACK)
This installation should be made by a qualified service person and should conform to
all local codes.
3
Version 1.1.0
Release Date : Feb. 24, 2011
Table of contents
1. Precautions ------------------------------------------------------------------------------------------------------ 4
2. Limitation of liability ------------------------------------------------------------------------------------------ 5
3. Disclaimer of warranty --------------------------------------------------------------------------------------- 5
4. Package ----------------------------------------------------------------------------------------------------------- 6
5. Name and function of each part --------------------------------------------------------------------- 7 ~ 8
6. Installation ------------------------------------------------------------------------------------------------ 9 ~ 11
6-1. Lens
6-2. When using an auto iris lens (DC- drive)
6-3. When using a C-Mount Lens
6-4. When using a CS-Mount Lens
6-5. Application of HD-SDI output
6-6. Power
7. Function and operation ----------------------------------------------------------------------------- 12 ~ 19
7-1.On Screen Menu(OSD)
7-2. Setting up the menu
7-3. VIDEO OUT
7-4. AUTO MENU
7-5. DAY/NIGHT
7-6. AWB
7-7. AE
7-8. PRIVACY
7-9. EFFECT
7-10. SYSTEM
7-11. INITIALIZE
7-12. EXIT
8. Trouble shooting guide ------------------------------------------------------------------------------------ 20
9. Dimension ------------------------------------------------------------------------------------------------------ 21
10. Specification ------------------------------------------------------------------------------------------ 21 ~ 22
4
Version 1.1.0
Release Date : Feb. 24, 2011
1. Precautions
· Please read the manual carefully before the installation in order to make use the
camera to be set up correctly and to have the best picture quality.
· Please keep the manual in good condition for your future reference and service
application.
· Installation and services should only be carried out by an authorized personnel
according to local safety regulations.
· If any liquid or solid matter gets into the housing, immediately disconnect the camera
from power supply and have it checked by your authorized dealer before reusing.
· Avoid installing the camera at extremely hot or cold places.
· If you are not a certified person, never try to dismantle the camera. To avoid electric
shock, never remove the screws or covers. There are no parts inside that need
maintenance by the user. All maintenance should be carried out by qualified
personnel.
· Avoid installing the camera at a place of high humidity.
· Avoid installing the camera at the place exposed to gas or oil.
· Keep the top glass of the lens always clean in order to obtain the best picture quality
all the time. Be careful not to be stained by fingerprint.
· Don't face the camera directly toward sunlight or sunlight reflecting area.
The sensor may go defective at this condition.
· Please give a special attention to keep the unit from dangerous drop or
external shock during the process of transportation or handling.
· Never try to touch the camera in wet hand. It may cause an electric shock.
· Do not expose the camera to radioactivity. It causes a serious damage on the sensor.
5
Version 1.1.0
Release Date : Feb. 24, 2011
2. Limitation of liability
This publication is provided “AS IS” without warranty of any kind, either express or implied,
including but not limited to, the implied warranties of merchantability, fitness for any particular
purpose, or non-infringement of the third party's right. This publication could include technical
inaccuracies or typographical errors. Changes are added to the information herein, at any time,
for the improvements of this publication and/or the corresponding product(s).
3. Disclaimer of warranty
In no event shall seller be liable to any party or any person, except for replacement or
reasonable maintenance of the product, for the cases, including but not limited to below :
(1) Any damage and loss, including without limitation, direct or indirect, special,
consequential or exemplary, arising out of or relating to the product;
(2) Personal injury or any damage caused by inappropriate use or negligent operation
of the user;
(3) Unauthorized disassemble, repair or modification of the product by the user;
(4) Inconvenience or any loss arising when images are not displayed, due to any reason
or cause including any failure or problem of the product;
(5) Any problem, consequential inconvenience, or loss or damage, arising out of the
system combined by the devices of third party.
(6) Any claim or action for damages, brought by any person or organization being
photogenic subject, due to violation of privacy with the result of that surveillance-
camera's picture, including saved data, for some reason, becomes public or is used
for the purpose other than surveillance.
4. Package contents
Full HD CCTV Box Camera 1EA Instruction Manual 1EA C-Mount Adaptor
Auto Iris Plug 1EA
6
Version 1.1.0
Release Date : Feb. 24, 2011
5. Name and function of each part
Protective cover①
C②-Mount lens adaptor
③DC Iris Jack for DC Auto Iris Lens
④Mounting bracket holder
Mounting bracket holder can be
separated and attached on the
bottom side as well.
Please use the supplied clamp
screws only to change the position
of the bracket. Using screws more
than 5mm depth can cause a serious
damage to the inside of this camera.
7
Version 1.1.0
Release Date : Feb. 24, 2011
⑤OSD Control button
⑥Power indicator LED
Lamp is on when the power is being
supplied.
⑦CVBS output (BNC Female)
Connect coaxial cable for composite
video signal out.
⑧HD-SDI output (BNC Female)
Connect coaxial cable for HD-SDI signal
video signal out.
NOTE : HD-SDI and CVBS output can be
used simultaneously
⑨RS-485 Control port
You can control SETUP menu
through this port by using external
controllers like a remote controller
that RS-485 Communication is
supported. For details, see page 20.
⑩Day & Night Out port
This unit can be synchronized by an
External IR LED kit through this port.
Low : CDS sensor off ( LED off)
High : CDS sensor On ( LED on)
⑪Power input terminal
Connect to the power source.
Polarity of the power is self-
configured. (Non-polarity).
8
Version 1.1.0
Release Date : Feb. 24, 2011
6. Installation
6-1. Lens
Lens is not supplied with the unit. C-Mount or CS-Mount type of lens is available.
Please select a lens that has a good F-Stop number in order to get the best picture quality.
Use of DC auto iris lens is recommended to achieve the best results for operating this product
effectively.
☞Caution
Please make sure the surface of the lens is always clear. Clean dirt or water drops with soft
cloth in order to avoid the picture blooming or reflection.
☞NOTE
To get the best image quality, please use recommended lenses from the manufacturer or
camera supplier.
6-2. When using an auto iris lens (DC-drive)
1. Please take off the sleeve outer cable of the lens by 10mm.
2. Please take off the sleeve inner cable of the lens by 2mm.
3. Solder the wires on the pin-connector (iris-jack) supplied with the lens according to the pin
configuration as shown in the drawing.
4. Assemble the lens.
5. Connect the Auto Iris jack.
Pin No. Lens
DC
No.1 Pin Damping -
No.2 Pin Damping +
No.3 Pin Drive +
No.4 Pin Drive -
9
Version 1.1.0
Release Date : Feb. 24, 2011
6-3. When using a C-mount Lens
Please assemble C-Mount adaptor.
C-Mount adaptor is included in the package.
Fix the lens by turning it clockwise.
6-4. When using a CS-mount Lens
Take off the Protection cover.
Take off the C-MOUNT adaptor.
Assemble the CS-MOUNT lens by turning it clockwise.
- When used with an Auto Iris lens, please insert the
iris jack into the Iris socket which is located on the
right side of the camera.
- Please set the lens mode by using OSD Switch on
the back of the camera depending on the type of
selected lens.
☞Caution
- Use the lens as shown in the picture here.
- When the lens is out of the spec, it could damage the camera inside
or may not be correctly fit with the camera.
- Use the lens less than 450g. Heavier lens can damage the camera.
10
Version 1.1.0
Release Date : Feb. 24, 2011
6-5. Application of HD-SDI output
Impedance alliance in the system connection.
Make sure to connect the cable with the power off. Please locate the impedance switches of
each equipment as instructed. Locate the switch to Hi-z position for the interim equipments.
Locate the switch to 75for the last equipment.
6-6. Power
12VDC camera
Please make sure to use a UL/CE approved and
12VDC/450mA regulated power supply.
12VDC/24VAC Dual Power camera (Option)
Please make sure to use a UL/CE approved and
12VDC/450mA, 24VAC/220mA regulated power
supply.
Tabla de contenidos
Manuales populares de Videocámara de otras marcas
Panasonic
Panasonic AG-HMC152EN Manual de usuario
Insignia
Insignia NS-DCC5HB09 - Camcorder - 720p Manual de usuario
MYDLINK
MYDLINK DCS-6100LH Manual de usuario
Sony
Sony video Hi8 Handycam CCD-TR555 Manual de usuario
SECURECOM
SECURECOM V-5014B Manual de usuario
Panasonic
Panasonic HDC-SD100 Manual de usuario
