VIORE LE24VF20 Manual de usuario
Ver. 111229-1
24” 1080p LCD Television with LED Backlight
LE24VF20
14
1
Contents
Contents
Caution
Safety Information
Unit and Accessories
Product Feature
Introduction
1. Front View
2. Rear View
4. Remote Control
Basic Operation
OSD Menu
1. Picture menu
2. Sound menu
3. Channel menu
4. Parental Control menu
5. Setup menu
6. Others menu
Simple Troubleshooting
2
3
4
4
5-9
5
6
8-9
10
11-18
11-12
13
14
15-16
17
18
19
20
3. Instruction for Wall Mount 7
2
Caution
Caution
is intended to alert the user to the presence of un-insulated "dangerous
to constitute a risk of electric shock to the persons.
The exclamation point within an equilateral triangle is intend to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Correct disposal of this Product
(Waste Electrical & Electronic Equipment (WEEE)
Your product is designed and manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-
of-life should be disposed of separately from your household waste.
Please dispose of this equipment at your local community waste collection/
recycling centre.
In the USA there are separate collection systems for used electrical and
electronic products. Please help us to conserve the environment we live
in!
This unit complies with America Safety directives.
This unit complies with FCC directives.
3
Safety Information
Safety Information
Electrical safety
Physical safety
the power cable
4
Unit and Accessories and Product Feature
Unit and Accessories
Product Feature
24
HDMI inputs for true digital connections
HDMI is a trademark of HDMI Licensing LLC in the United States and other countries.
®
1920 x 1080 native resolution for Full-HD(1080p) performance
Mains adaptor
TV set
User's Manual
Remote Control and
Batteries (AAA x2)
Quick Start Guide
Stand Installation Guide
Stand Base
Warranty
5
Introduction
Introduction
1. Front View
1). (IR) Infrared Receiver: Receives IR signals from the remote control.
(Power on/Standby)LED Indicator: Press POWER to turn on and off.
Indicator on(Red) Standby mode
Indicator on(Green) Power on mode
2). The functions of the buttons:
INPUT: Press to display the input source menu.
MENU: Press to display the OSD menu,
press again to exit the menu.
CH+/-: Press to scan through channels.
VOL+/-: Press to adjust the volume.
POWER: Turn on/standby the TV set.
The effective receiving range for the signal is 5-8 metres from the front of the remote
control window, and 300to the left or right side and 200above or below the remote control
window.
Press INPUT button on the TV set or remote control to
display the input source menu, and use CH+/- button on
the TV set or / button on remote control to select the
input source, press OK button on the remote control to
enter.
Note: Before you select the input source, make sure the
connections are prepared.
Power Indicator
Remote Control window (Keep clear)
INPUT MENU CH+ CH- VOL+ VOL - POWER
6
Introduction
2. Rear View
1). Headphone out : Connect it to your headphone or audio equipments.
4).
3). RF: Connect antenna or cable 75 Ohm coaxial to receive TV signal.
11). COAX : Digital audio output.
10). YPbPr : Connect them to the component video output of video device.
: Connect it to the HDMI output of video device.
7). HDMI
: Connect to power supply with the mains adaptor.
8). POWER
VIDEO : Connect it to video output of video device.
5).
L/R in : Connect them to audio output of video device. (Shared with YPbPr)
6).
9). Service : For service use only.
2).
Coax
RF VGAPC-audio HDMI
Service
POWERVideo R in L in
YPbPr
1 2 3 4 5 6 7 8
9
10
11
7
Introduction
3. Instruction for Wall Mount
Dimensions for Mounting Hole Pattern
A wall mount kit (purchased separately) would allow you to mount your VIORE
TV on the wall. For detailed information on installing the wall mount, refer
to the instructions provided by the wall mount manufacturer. It is strongly
recommended to contact a technician for professional assistance for wall mount
installation. VIORE is not responsible for any damage to the product or injury to
yourself or others resulting from the wall-mounting.
-This VIORE TV is compatible with a 100mm x 100mm mounting hole pattern.
- Do not mount your VIORE TV at more than a 15 degree tilt.
- Always use two people to mount the TV to a wall.
- Do not install your Wall Mount Kit while your TV is turned on. It may result in
personal injury due to electric shock.
- 4 pcs of type M4 screws are required for installing the wall mount bracket to
your VIORE TV. Do not use screws that are longer than 10 mm. Screws that
are too long may cause damage to the inside of the TV set.
- Do not fasten the screws too tight for this may damage the TV or cause the
TV to fall, resulting in personal injury. VIORE is not liable for these kinds of
incidents
100mm
100mm
8
Introduction
4. Remote Control
The remote control is using Infra-Red(IR). Point it towards the front of the TV. The remote
control may not work correctly if it is operated out of range or out of angle.
CC: Press to display the closed caption.
MTS: Press to select the audio channels.
FAV: Press to add or remove favorite channel.
EPG: Press to enter the EPG menu directly.
DISPLAY: Display the information of current mode.
Thumbstick( ): Allows you to navigate the on-screen
menus and adjust the system settings to your preference.
OK: CONFIRM button.
MENU: Press to display the OSD menu.
EXIT: Press to exit the OSD menu.
MUTE: Press to mute the sound, press again or press VOL+ to
unmute.
VOL+/-: Press to adjust the volume.
CH+/-: Press to scan through channels.
SLEEP : Shutdown timer.
Number Buttons: Choose channel directly.
Select channel 5, Press button "5";
Select channel 62, Press button "6", then press button "2" in 2
seconds;
Select channel 151, Press button "1", and press button "5" in 2
seconds, and press button "1" in 2 seconds;
Select channel 5-1, Press button "5", and press button "- / - -"
in 2 seconds, and press button "1" in 2 seconds;
PICTURE: Press repeatedly to cycle through the available
video picture modes.
SOUND: Press to cycle through the different sound settings.
PICTURE SOUND SLEEP DISPLAY
INPUT
VOL+
VOL-
EXIT
MUTE
MENU
OK
CH+
CH-
123
456
789
0 -/--
FAV
CC EPGMTS
(RETURN): Return to the previous channel viewed.
POWER(red button): Turn the TV on/standby.
INPUT: Press to display the input source menu.
5&9
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Televisor LCD de VIORE
VIORE
VIORE LC40VF5HTL Manual de usuario
VIORE
VIORE LC22VF59 Manual de usuario
VIORE
VIORE V42NAFC Manual de usuario
VIORE
VIORE PLC10V49 Manual de usuario
VIORE
VIORE LC4OVXF6OSB Manual de usuario
VIORE
VIORE LC22VX60PB Manual de usuario
VIORE
VIORE LC46VF60 Manual de usuario
VIORE
VIORE LED22VF50 Manual de usuario
VIORE
VIORE LED22VF60 Manual de usuario
VIORE
VIORE LC32VH55 Manual de usuario
VIORE
VIORE LC40VF60CN Manual de usuario
VIORE
VIORE V40LCF120P Manual de usuario
VIORE
VIORE LC32VH56A Manual de usuario
VIORE
VIORE LC47VXF60PB Manual de usuario
VIORE
VIORE V32LC76F Manual de usuario
VIORE
VIORE LED32VF60 Manual de usuario
VIORE
VIORE LC32VH60 Manual de usuario
VIORE
VIORE LCD32VXF6OBD Manual de usuario
VIORE
VIORE LC32VX60HDT Manual de usuario
VIORE
VIORE LC26VH56 Manual de usuario
