Viofo T130 Manual de usuario
Copyright (c) 2021,VIOFO Ltd, all rights reserved
USER MANUAL
V21.12.22
The user manual is available on
https://support.viofo.com
1. Product Overview Standard Items
2
Standard Items
Optional Accessories
Product Diagram
Main Unit
Inserting / Remove the Memory Card
Install Front Camera
Install Rear Camera
Install Interior Camera (Optional)
Remove Cameras
2. Installation
Power On / Off
Loop Recording
Emergency Recording
Turn off MIC
Parking Mode
3. Dash Cam Recording Operation
Playback Video
Delete Video
Video File Storage Location
4. Play and Manage Videos
Connect to Smartphone
APP Layout Overview
5. Review and Control on Smartphone
Table of Contents
7. Systems Setting
Video Setting
System Setting
Other
8. Firmware Upgrade
9. Notice
10. Customer Service
21
27
27
29
6
13
15
17
6. Install Optional Accessories 20
Mount
Car Charger
Adapter
VI OF O
Trim
Removal Tool
Type-C Cable
Card Reader
Adapter
Warranty Card
Static (Windshield)
Stickers
21
Product Overview
1. GPS Module
2. Reset Hole
3. microSD Card Slot
4. Front Rotatable Lens
5. Interior Rotatable Lens
6. Power On | OFF
Recording Start | Stop
7. Microphone On | OFF
8. Wi-Fi On | OFF
9. Video Protect
10. Rear Camera Port
11. Power In / microSD Card Reader
Mode (computer)
12. Recording Status Indicator
13. Microphone Status Indicator
14. Wi-Fi Status Indicator
15. GPS Status Indicator
16. Heat-dissipation Block
(Don't touch this block)
Optional Accessories
Product Diagram
Front Camera (Main Unit)
VIOFOHardwireKitfor CarDash Camera
INPUT:
RED
—POWER
BLACK
—GND
YELLOW
—ACC
Input:12/24V; Output: 5V2A Max
43
Rear Camera
Circular Polarizing
Lens Filter Bluetooth Remote
HK4
Hardwire Kit
Rear Camera
USB Cable (6M)
6
5
2
1
3
4
78910
16
12
11
13 14 15
1. Bracket 2. Power in 3. Lens
1. Inserting / Removing the Memory Card
Insert the Memory Card
LED light
REC
MIC
GPS
Wi-Fi
LED Status
Buttons Behavior
Behavior
Rear Camera (Optional)
LED Indicators
Buttons and Icons
Solid Red
Solid Red
Red Off
Solid Blue
Flashing Blue
Solid Blue
Flashing Blue
Blue Off
Long press to Power ON / OFF
Click once to start / stop recording
Long press to turn on / off Wi-Fi
Short press to enable / disable infrared lights
Click once can lock the file being recorded
Long press to format the card
Hold both buttons to reset the camera
to default settings
Click once to disable /
enable audio recording
Make sure the metal contacts on the
memory card are facing away from
the VIOFO logo side of the main unit.
Ensure the camera is turned off and
push the memory card into the card
slot until you hear a click.
Rear
3
2
1
65
Installation
Recording
Audio Recording On
Audio Recording Off
GPS Signal Received
GPS Signal Receiving
Wi-Fi Connected
Wi-Fi on and Waiting Connecting
Wi-Fi Disabled
Flashing Red Not Recording
Updating Firmware
2. Install Front Camera
Formatting the Memory Card
Formatting the Memory Card in the Camera
Install the Mount
Formatting the Memory Card using a computer
To format the card in the camera, either use the VIOFO App and the
format option in the Settings, or alternatively long press the [ ] button.
1. Insert the clips, then slide the mount horizontally into the slot on the
back of camera.
Remove the Memory Card
Note:
Ensure that the camera is turned off, and then push the edge of the
memory card with your fingernail. The card will spring out far enough to
be removed.
• The microSD card is sold separately. The microSD card must have a UHS-U1/U3
or above rating and the capacity up to 256GB.
• We recommend you buy the VIOFO brand memory cards which are
manufactured with top-tier MLC NAND flash, making them durable and reliable.
• Please format the card on a computer to the exFAT or FAT32 file system.
• Formatting will permanently erase any data on the microSD card. For best
performance, format periodically (after backing up any important files).
• Make sure the metal contacts on the memory card are facing away from the
VIOFO logo side of the main unit. Ensure the camera is turned off and push the
memory card into the card slot until you hear a click.
• Please turn off the T130 before inserting or removing the microSD card.
• Inserting or removing the microSD card while recording may destroy the files.
To format the memory card on your computer, follow your computer’s
user manual.
For deep formatting of the memory card, you can also download the
GUIFormat tool from our official website:
https://support.viofo.com/support/solutions/folders/19000019360
87
2. Select a location on the windshield behind the rear-view mirror where the
camera will not obstruct the driver’s view while driving.
3. Wipe clean the installation surface of the windscreen with a dry
cloth, it must be grease free for the sticky pad to stick firmly.
4. Peel the protection film off the sticky pad and camera lens.
5. Fix the front camera on the selected location.
6. Adjust the lens angle
Adjust the angle of the lens up / down if required. The Interior Rotatable
Lens can also be rotated left and right.
Never try to rotate the lens completely. Cameras destroyed by too
much rotation of the lens are out of warranty.
7. Connecting to Power.
Plug the USB power adapter into your vehicle’s 12V / 24V female
power socket. Insert the 4M USB cable’s male connector into the
camera mount's USB Type-C port.
8. Layout after front camera installation and power connection:
2
109
Connect to car
cigarette lighter socket
Best mounting location
1
Removing the front camera
5. Remove Cameras
To remove the front camera from its bracket, slide the camera to the right
and pull the front camera out of the mounting bracket.
Note: When you want to plug and unplug the front camera or rear camera,
please turn off the camera first.
Removing the rear camera
Unplug the rear camera cable from the rear camera port and remove
the entire mount from the glass.
Tips
1. Do not install / mount the camera in a location that interferes with the
driver’s visibility and safety.
2. Install / mount the camera close to the rearview mirror so that both sides of the
scene being recorded are equally covered by the camera’s FOV (field of view).
3. To ensure a clear view on rainy days, the lens should be positioned within the
windshield wiper’s sweeping range.
4. Do not install / mount the camera on or near airbag panels.
5. Installation / mounting location should not be affected by sun control film
(window tint). There should not be any other electronic equipment close to the
camera for optimal performance.
3. Install Rear Camera (Optional)
1. Select an installation location.
2. Wipe clean the installation surface of the windscreen with a dry cloth.
Select a location on the windscreen, without defrost grid wires, and where
the camera can record the entire rear view.
3. Peel the protection film OFF the sticky pad and camera lens.
4. Fix the rear camera on the selected location.
5. Connecting with Rear Camera.
Power off the product and connect the rear camera cable to the front
camera (main unit). Cable routing should be as shown in the following two
diagrams. Use the cable clips to help fix the two cables conveniently and safely.
1
2
Rear Camera
Front Camera
Rear
11 12
Rear
Power On/Off
Emergency Recording
When the G-sensor is activated and a collision occurs, current footage will
be locked automatically to avoid being overwritten by loop recording.
1. Automatic emergency recording
Pressing the [ ] button during footage recording will lock current
footage to avoid being overwritten by loop recording.
2. Manual emergency recording
1. When you start the engine, the camera will turn on and begin recording
automatically.
2. When you turn off the engine or unplug the charging cable from the
power adapter, the camera will stop recording and turn off.
3. Long press [ ] button to power on or off the camera.
Loop Recording
1. Insert a microSD card into the camera’s card slot and automatic loop
recording will begin once the camera detects power.
2. Time frame for each video file is 1 / 2 / 3 / 5 / 10 minutes.
3. When there is insufficient space on the MicroSD card, loop recording
will automatically overwrite the oldest files (one by one).
4. Loop recording files are saved to SD card: \ DCIM \ MOVIE folder.
Note:
The collision sensing feature can be adjusted in settings under the “G-sensor”
option via VIOFO App. Locked files are saved to SD card: DCIM \ Movie \ RO
There are three options for parking mode.
1. Auto Event Detection
The camera will automatically record a video sequence while a moving
object is being detected during parking mode. It will stop recording when
no new movement is detected.
2. Time Lapse Recording
Time lapse record a video at low frames at 1 / 2 / 3 / 5 / 10 / 15 fps, it keeps
recording continuously without audio recorded.
Note: Audio cannot be recorded in time-lapse mode.
3. Low Bitrate Recording
Disable / Enable Audio Recording
Pressing the [ ] button once to turn off / on audio recording, [ ] LED
light will be off / solid Red.
Parking Mode
This mode records both video and audio using a low bitrate for front, interior
and rear views. It records continuously using a small file size.
13 14
Dash Cam Recording Operation
Note:
Do not install / mount the camera or cables near an airbag panel or within
the airbag’s working range. The manufacturer is not liable for any injury or
death caused by deployment of the airbag.
Recording Mode Behavior
Loop Recording
( Including Motion Detection ) DCIM \ Movie
DCIM \ RO
DCIM \ Movie \ Parking
Emergency Recoding
( Locked Video )
Parking recording ( Auto Event
Detection / Time-lapse Recording /
Low Bitrate Recording )
There are three options for parking mode.
1. Auto Event Detection
The camera will automatically record a video sequence while a moving
object is being detected during parking mode. It will stop recording when
no new movement is detected.
2. Time Lapse Recording
Time lapse record a video at low frames at 1 / 2 / 3 / 5 / 10 / 15 fps, it keeps
recording continuously without audio recorded.
Note: Audio cannot be recorded in time-lapse mode.
3. Low Bitrate Recording
Long press the Wi-Fi button to enable Wi-Fi. Connect Wi-Fi on your phone
first.Open VIOFO app and choose "Connect your camera" to use your
phone to control the dashcam. You can play and manage files through
the APP. You can check the app introduction refer to [Review and Control
on Smartphone].
Playback Video on VIOFO APP
Playback Video on PC
Files recorded by front camera, interior and rear camera are saved
separately.
Video File Storage Location
File Format Definition
This mode records both video and audio using a low bitrate for front, interior
and rear views. It records continuously using a small file size.
_ _ _
_ _ _
_ _ _
Year Date Time
F for the front camera
I for the interior camera
R for the rear camera
P for the video recorded in the
parking mode.
1. Remove memory card from dashcam.
Snapshot DCIM \ Photo
Note: Parking mode provides surveillance of your parked vehicle only when the
engine is off and the USB Type-C Hardwire Kit is used to provide continuous
power.The Hardwire Kit also protects your car battery from being drained. We
recommend buying the VIOFO HK4 ACC hardwire kit cable for parking mode
recording.
Before removing the memory card, make sure you have switched
off the Dashcam.
2. Insert the memory card into a memory card reader connected to your PC.
3. Open the DCIM folder, using VLC or another video player to playback
the video.
15 16
Play and Manage Videos
The VIOFO app allows you to control your camera remotely by using a
smartphone. Features include full camera control, live preview, playback
and video recording.
Android users can download the app from Google Play, or download the
APK directly from our official website:
https://www.viofo.com/content/13-app.
•Step 1: Use the phone to connect T130 Wi-Fi. When the phone is connected
with the dashcam, the LED lights on the camera shows solid blue.
•Step 2: Open VIOFO app and choose "Connect your camera" to use
your phone to control the dashcam.
• Step3: Now you can see the live view of both cameras. You can change
the settings and check the files on the app.
Long press the [ ] button to turn on the Wi-Fi. Wi-Fi name (SSID) of Wi-Fi
is VIOFO_T130_XXXX, Wi-Fi default password is 12345678. When the Wi-Fi is
on, Wi-Fi Status LED will be flashing blue.
Connect to Smartphone
Android Device
IOS users can download the app from the App store.
IOS Device
Connect VIOFO APP
17 18
Review and Control on Smartphone
GET IT ON
Google Play
Download on the
App Store
Choosing "Connect your camera" to use your phone to control the dashcam.
4 - Official Support
5 - Firmware Update
1 - Menu
2 - Downloaded Video
3 - VIOFO Official Facebook Page
APP Layout Overview
1
2
3
4
5
Otros manuales para T130
1
Tabla de contenidos
Otros manuales de Cámara de salpicadero de Viofo
Viofo
Viofo A119S V3 Manual de usuario
Viofo
Viofo A119 V3 Manual de usuario
Viofo
Viofo A119 mini Manual de usuario
Viofo
Viofo A118C Manual de usuario
Viofo
Viofo A129 Duo IR Manual de usuario
Viofo
Viofo A129 Plus Duo IR Manual de usuario
Viofo
Viofo WM1 Manual de usuario
Viofo
Viofo A129 Manual de usuario
Viofo
Viofo A129 Pro Duo Manual de usuario
Viofo
Viofo A119 V3 Manual de usuario
