Viking Designer DGRT300-4B Manual de usuario

PLANNING AND DESIGN GUIDE

V I K I N G R A N G E . C O M • 1 - - V I K I N G 1

R E L E A S E D 0 5 / 1 4 / 0

Both models include

• Brass sealed burners with

porcelain/cast iron caps and automatic

ignition/re-ignition

• One-piece, extremely durable steel

top

• Separate spill collection areas; each

area holds up to 1-1⁄2 quarts of liquid

spillover

• Grate design provides continuous

surface for easy movement of pots

• Durable knobs with childproof,

push-to-turn safety feature

30”W. 4B model includes

• Four burners

o Left front—16,000 BTU high/3,400

BTU low

o Left rear—12,000 BTU high/1,700

BTU low

o Right rear— ,000 BTU high/1,200

BTU low

o Right front—6,000 BTU high/950

BTU low

36”W. 5B model includes

• Five burners

o Left front—12,000 BTU high/1,700

BTU low

o Left rear—10,000 BTU high/1,500

BTU low

o Center—16,000 BTU high/3,400

BTU low

o Right rear— ,000 BTU high/1,200

BTU low

o Right front—6,000 BTU high/950

BTU low

FINISH DETAILS FOR BOTH MODELS**

• Stainless Steel (SS), Black (BK), White

(WH), Graphite Gray (GG), Stone Gray

(SG), and Biscuit (BT).

o Finish designates top. Black porcelain

grates, porcelain burner caps, and

knob grips.

• White (WH)

o Gray porcelain grates, burner caps,

and knob grips.

• Brass Trim Option (BR)—knobs. Brass

components have a durable protective

coating for maintenance-free normal

use.

Standard Features & Accessories

Model Options

COOKING

Designer Built-In Gas 30”/36”W.

Sealed Burner Rangetop

*Shown throu hout with 6”H. back uard. See Installation Notes & Accessories for details.

ORDERING INSTRUCTIONS

First specify model number, and then color code (DGRT300-4BSS). If ordering optional brass trim, specify code at end (DGRT300-4BSSBR).

If ordering optional LP conversion, specify code at end (DGRT300-4BSSLP).

DGRT300-4B*

30”W. Four-Burner

Ran etop

DGRT360-5B*

36”W. Five-Burner

Ran etop

DGRT300-4B

30”W. Four-Burner

Ran etop

DGRT360-5B

36”W. Five-Burner

Ran etop

COOKING

Designer Built-In Gas 30”/36”W.

Sealed Burner Rangetop

PLANNING AND DESIGN GUIDE

V I K I N G R A N G E . C O M • 1 - - V I K I N G 1

R E L E A S E D 0 5 / 1 4 / 0



Please see

Installation Notes &

Accessories

for important

installation

information,

including

backguard, high-

shelf, and Island

trim.

24-1/2”

(62.2 cm)

26-1/8”

(66.4 cm)

27-5/8”

(70.5 cm)

29-7/8”

(75.9cm)

12-1/8”

(30.8 cm)

6-1/8”

(15.6cm)

(to cookingsurface)

24-1/2”

(62.2 cm)

26-1/8”

(66.4 cm)

27-5/8”

(70.5 cm)

35-7/8”

(91.1cm)

12-1/8”

(30.8 cm)

6-1/8”

(15.6cm)

(tocookingsurface)

DGRT300-4B DGRT3360-5B

Overall w dth 29-7/8” (75.9 cm) 35-7/8” (91.1 cm) max.

Overall he ght (from bottom)

To cook ng surface 6-1/8” (15.6 cm)

To top of sland tr m 6-1/8” (15.6 cm)

To top of 6” backguard 12-1/8” (30.8 cm)

To top of 10” backguard 16-1/8” (41.0 cm)

To top of high shelf 24-1/8” (61.3 cm)

Overall depth (from rear)

To end of s de panel 24-1/2” (62.2 cm)

To end of control panel 26-1/8” (66.4 cm)

To end of knobs 27-5/8” (70.5 cm)

Star-K Kosher

Certification for

use on the Jewish

Sabbath or Jewish

holidays

Dimensions & Speci ications

PRODUCT DIMENSIONS

ALL MODELS

30”W. Models 36”W. Models

PLANNING AND DESIGN GUIDE

V I K I N G R A N G E . C O M • 1 - - V I K I N G 1

R E L E A S E D 0 5 / 1 4 / 0

COOKING

Designer Built-In Gas 30”/36”W.

Sealed Burner Rangetop

36”

(91.4 cm)

30” 30” (76.2 cm)

36“ 36” (91.4 cm)

42”

(106.7cm) min.

18”min.

(45.7cm)

6”min.

(15.2cm)

13”max.

(33.0cm)

5-3/4”

(14.6 cm)

Minimum clearances from adjacent

combustible construction

• Cooking surface and below, i.e., 36”

(91.4 cm) and below

o Sides—0”

o Rear

•0” with backguard or high-shelf

•0” with island trim and non-

combustible rear wall

•6” (15.2 cm) with island trim and

combustible rear wall.

o Top grate support—36” (91.4 cm)

Important: The top grate support

must be 3/ ” (0.95 cm) above the

adjacent base cabinet countertop.

• Above cooking surface, i.e., above

36” (91.4 cm)

o Sides—6” (15.2 cm)

o Within 6”(15.2 cm) side clearance,

wall cabinets no deeper than

13” (33.0 cm) must be minimum

1 ” (45.7 cm) above cooking surface.

• Wall cabinets directly above product

must be minimum 42” (106.7 cm)

above cooking surface.

* This minimum height requirement does

not apply if a rangehood is installed

over the cooking surface.

Do not install two or more units

side-by-side.

Dimensions & Speci ications

CLEARANCE DIMENSIONS

DGRT300-4B

30”W. Four-Burner

Ran etop

DGRT360-5B

36”W. Five-Burner

Ran etop

24-1/2”

(62.2cm) min.

26-1/8”

(66.4cm) max.

3/4”

(1.9cm)min.

2-1/4”

(5.7cm)

3”

(7.6cm)

COOKING

Designer Built-In Gas 30”/36”W.

Sealed Burner Rangetop

PLANNING AND DESIGN GUIDE

V I K I N G R A N G E . C O M • 1 - - V I K I N G 1

R E L E A S E D 0 5 / 1 4 / 0

UTILITY

REQUIREMENTS

GAS

o Shipped natural

gas or

LP/propane; field

convertible with

conversion kit

(sold seperately)

o Accepts standard

residential 1/2”

(1.3 cm) ID gas

service line

o Gas manifold

pressure

o Natural gas 5.0”

W.C.P.

o LP/Propane

10.0" W.C.P.

ELECTRICAL

• Four-foot

(121.9 cm) cord

included with

rangetop

• 3-wire with

ground/3-prong

plug

• 120 V/60 Hz

• Max. amp usage—

o 2.0 amps

PLUMBING

Not applicable

Installation Requirements

ACCESS REQUIREMENTS

DGRT300-4B DGRT360-5B

Cutout w dth 30” (76.2 cm) 36” (91.4 cm)

Cutout he ght 5-3/4” (14.6 cm)**

Cutout depth 24-1/2” (62.2 cm)

Surface burner rat ng

Left front 16,000 BTU Nat. (4.7 kW)/15,500 BTU LP (4.5 kW) 12,000 BTU Nat. (3.5 kW)/11,500 BTU LP (3.4 kW)

Left rear 12,000 BTU Nat. (3.5 kW)/11,500 BTU LP (3.4 kW) 10,000 BTU Nat. (2.5 kW)/9,500 BTU LP (2.4 kW)

Center 16,000 BTU Nat. (4.7 kW)/15,500 BTU LP (4.5 kW)

R ght rear 8,000 BTU Nat. (2.0 kW)/7,500 BTU LP (1.9 kW) 8,000 BTU Nat. (2.0 kW)/7,500 BTU LP (1.9 kW)

R ght front 6,000 BTU Nat. (1.5 kW)/5,500 BTU LP (1.4 kW) 6,000 BTU Nat. (1.5 kW)/5,500 BTU LP (1.4 kW)

**Top of grates should be 3/8” (1.0 cm) above countertop.

*120 VAC/50 Hz within 4 ” (121.9 cm) of right rear of rangetop.

6”H. Backguard

• Stainless Steel (SS)

•Coordinates with all finishes

10”H. Backguard

• Stainless Steel (SS)

• Coordinates with all finishes

High-shel

• Stainless Steel (SS)

• Coordinates with all finishes

• Shelf comes attached to a 24”H. backguard

Island Trim

• Stainless Steel (SS)

• Coordinates with all finishes

• For island/peninsula installation

• Can replace backguard if wall is non-combustible

Countertop Side Trim

• Stainless Steel (SS)

• Coordinates with all finishes

• Installs on side of unit; overlaps countertop

• One pair of trim

LP/Propane Conversion Kit

• Allows for field conversion of range from natural gas to LP

Compliance In ormation

WARRANTY INFORMATION*

• One-year full warranty—complete product

• Ten-year limited warranty—surface burners, griddle burners and grill burners

• Ninety-day limited warranty—cosmetic parts such as glass, painted, and decorative items

* For complete warranty see Use & Care Guide. Warranty valid on Viking products shipped within the United States and Canada.

COOKING

Designer Built-In Gas 30”/36”W.

Sealed Burner Rangetop

PLANNING AND DESIGN GUIDE

V I K I N G R A N G E . C O M • 1 - - V I K I N G 1

R E L E A S E D 0 5 / 1 4 / 0

 Installation Notes & Accessories

A backguard, high-shelf, or island trim must be used for all installations.