ViewSonic VSD243 Manual de usuario
VSD243
Smart Display
User Guide
Model No. VS16340
i2
Thank you for choosing ViewSonic
With over 30 years as a world leading provider of visual solutions, ViewSonic
is dedicated to exceeding the world’s expectations for technological evolution,
innovation, and simplicity. At ViewSonic, we believe that our products have the
potential to make a positive impact in the world, and we are condent that the
ViewSonic product you have chosen will serve you well.
Once again, thank you for choosing ViewSonic !
i2
Compliance Information
Please read before proceeding
• Use only the batteries and power adapter provided by the manufacturer. The use of
unauthorized accessories may void your warranty.
• Do not store your device in temperatures higher than 50°C (122°F).
• The operating temperature for this device is from 0°C (32°F) to 35°C (95°F).
CE Conformity for European Countries
The device complies with the relevant section of the Low Voltage Directive
2014/35/EC, Eco-Design Directive 2009/125/EC, RoHS Directive 2011/65/EU,
WEEE Directive 2012/19/EU, and Radio Equipment Directive 2014/53/EU
European Union Regulatory Conformance
The equipment complies with the RF Exposure Requirement 2014/53/EU, Council
Recommendation of 12 June 2014 on the limitation of exposure of the general public to
electromagnetic elds (0-300 GHz). This equipment meets the following conformance
standards: EN301489-1, EN301489-17, EN55022/24, EN60950-1, EN300328.
We, hereby, declare that this Wi-Fi & Bluetooth radio is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU.
Following information is only for EU-member states:
The mark shown to the right is in compliance with the Waste Electrical and
Electronic Equipment Directive 2012/19/EU (WEEE).
The mark indicates the requirement NOT to dispose the equipment as unsorted
municipal waste, but use the return and collection systems according to local law.
If the batteries, accumulators and button cells included with this equipment,
display the chemical symbol Hg, Cd, or Pb, then it means that the battery has a
heavy metal content of more than 0.0005% Mercury, or more than 0.002%
Cadmium, or more than 0.004% Lead.
iiiii
Declaration of RoHS2 Compliance
This product has been designed and manufactured in compliance with Directive 2011/65/
EU of the European Parliament and the Council on restriction of the use of certain
hazardous substances in electrical and electronic equipment (RoHS2 Directive) and
is deemed to comply with the maximum concentration values issued by the European
Technical Adaptation Committee (TAC) as shown below:
Substance Proposed Maximum
Concentration Actual Concentration
Lead (Pb) 0.1% < 0.1%
Mercury (Hg) 0.1% < 0.1%
Cadmium (Cd) 0.01% < 0.01%
Hexavalent Chromium (Cr6+) 0.1% < 0.1%
Polybrominated biphenyls (PBB) 0.1% < 0.1%
Polybrominated diphenyl ethers
(PBDE) 0.1% < 0.1%
Certain components of products as stated above are exempted under the Annex III of the
RoHS2 Directives as noted below:
Examples of exempted components are:
1. Mercury in cold cathode uorescent lamps and external electrode uorescent lamps
(CCFL and EEFL) for special purposes not exceeding (per lamp):
(1) Short length (≦500 mm): maximum 3.5 mg per lamp.
(2) Medium length (＞500 mm and ≦1,500 mm): maximum 5 mg per lamp.
(3) Long length (＞1,500 mm): maximum 13 mg per lamp.
2. Lead in glass of cathode ray tubes.
3. Lead in glass of uorescent tubes not exceeding 0.2% by weight.
4. Lead as an alloying element in aluminium containing up to 0.4% lead by weight.
5. Copper alloy containing up to 4% lead by weight.
6. Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by
weight or more lead).
7. Electrical and electronic components containing lead in a glass or ceramic other than
dielectric ceramic in capacitors, e.g. piezoelectric devices, or in a glass or ceramic
matrix compound.
iiiii
Important Safety Instructions
1. DO NOT place objects on top of the device, as objects may scratch the screen.
2. DO NOT expose the device to dirty or dusty environments.
3. DO NOT place the device on an uneven or unstable surface.
4. DO NOT insert any foreign objects into the device.
5. DO NOT expose the device to strong magnetic or electrical eld.
6. DO NOT expose the device to direct sunlight as it can damage the LCD Screen. Keep
it away from heat sources.
7. DO NOT use the device in the rain.
8. Please check with your Local Authority or retailer for proper disposal of electronic
products.
9. The device and the adapter may produce some heat during normal operation or
charging. To prevent discomfort or injury from heat exposure, DO NOT leave the
device on your lap.
10. POWER INPUT RATING: Refer to the rating label on the device and be sure that
the power adapter complies with the rating. Only use accessories specied by the
manufacturer.
11. DO NOT use a pen or any sharp object to tap the screen.
12. Clean the screen with a soft cloth. If needed, dampen the cloth slightly before
cleaning. Never use abrasives or cleaning solutions.
13. Always power o the device to install or remove external devices that do not support
hot-plug.
14. Disconnect the device from an electrical outlet and power o before cleaning the
device.
15. DO NOT disassemble the device. Only a certied service technician should perform
repair.
16. The device has apertures to disperse heat. DO NOT block the device ventilation, the
device may become hot and malfunction as a result.
17. Users have to use the connection to USB interfaces with USB 2.0 version or higher.
18. PLUGGABLE EQUIPMENT: the socket-outlet shall be installed near the equipment
and shall be easily accessible.
viv
Copyright Information
Copyright © ViewSonic Corporation, 2018. All rights reserved.
Android, Google, Google Play, the Google Play logo and other marks are trademarks of
Google Inc.
This product has an AndroidTM platform based on Linux, which can be expanded by a
variety of JME-based application SW.
All products used in this device and trademarks mentioned herein are trademarks or
registered trademarks of their respective owners.
Wi-Fi and the Wi-Fi CERTIFIED logo are registered trademarks of the Wireless Fidelity
Alliance.
microSD™ is a trademark of SD Card Association.
Java, JME and all other Java-based marks are trademarks or registered trademarks of
Sun Microsystems, Inc. in the United States and other countries.
The actual included applications (apps) may dier from the illustrated screen shots.
VESA® is a registered trademark of the Video Electronics Standards Association. DPMS
and DDC are trademarks of VESA®.
ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency
(EPA).
As an ENERGY STAR® partner, ViewSonic Corporation has determined that this product
meets the ENERGY STAR® guidelines for energy eciency.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors
or omissions contained herein; nor for incidental or consequential damages resulting
from furnishing this material, or the performance or use of this product.In the interest of
continuing product improvement, ViewSonic Corporation reserves the right to change
product specications without notice. Information in this document may change without
notice.
No part of this document may be copied, reproduced, or transmitted by any means, for
any purpose without prior written permission from ViewSonic Corporation.
Intellectual Property Right Information
Right to all technologies and products that comprise this device are the property of their
respective owners:
This product has an Android platform based on Linux, which can be expanded by a variety
of Java-Script-based application SW.
Java, JME and all other Java-based marks are trademarks or registered trademarks of
Sun Microsystems, Inc. in the United States and other countries.microSD is a trademark
of SD Card Association.
viv
Product Registration
To meet your future needs, and to receive any additional product information as it
becomes available, please register your product on the Internet at: www.viewsonic.com.
For Your Records
Product Name:
Model Number:
Document Number:
Serial Number:
Purchase Date:
VSD243
ViewSonic Smart Display
VS16340
VSD243_UG_ENG Rev. 1A 11-12-18
_______________________________
_______________________________
Product disposal at end of product life
ViewSonic respects the environment and is committed to working and living green. Thank
you for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn
more.
USA & Canada: http://www.viewsonic.com/company/green/recycle-program/
Europe: http://www.viewsoniceurope.com/eu/support/call-desk/
Taiwan: http://recycle.epa.gov.tw/
Table of Contents
1vi
1 VSD243 Smart Display Features
2 Set Up Your VSD243 Smart Display
2.1 Connection ......................................................................... 4
2.2 Get Your Smart Display Ready for Use .............................. 4
2.3 Power on Your Device ........................................................ 5
2.4 Power O Your Device ....................................................... 6
3 About Your VSD243 Smart Display
3.1 Touch Screen ..................................................................... 7
3.2 Applications, Widgets and Shortcuts.................................. 8
3.3 Home Screen ..................................................................... 8
3.4 Customizing Your Home Screen ...................................... 10
3.4.1 Add an Item (Shortcut) ........................................ 10
3.4.2 Move an Item ..................................................... 10
3.4.3 Delete an Item .................................................... 10
3.4.4 Change the Wallpaper ........................................ 10
3.5 Connecting to HDMI-compliant Devices via HDMI Input.. 12
4 OSD Menu
4.1 Adjustment Bars ............................................................... 13
4.2 Functions items ................................................................ 14
4.3 OSD Notice....................................................................... 15
4.4 OSD and Hot keys setting ................................................ 15
5 Troubleshooting
5.1 Touch Screen Problems ................................................... 16
5.2 Other Problems ................................................................ 16
6 Appendix
Specication ............................................................................. 17
Table of Contents
Table of Contents
1vi
VSD243 is a Smart Display with 23.6-inch quad-core display running on
Android 8.1 (Oreo) Comes with 1920x1080p HD resolution, allow you to work
with HDMI, full-sized USB connectivity as well.
1 VSD243 Smart Display Features
This section introduces you to the features of your Smart Display.
NOTE
• The features or applications described in this User’s manual may vary depended on the
device model purchased.
Front View
No. Components Descriptions
1
Front-Panel Camera
- Used for taking a front picture just the same as a
self-portrait.
- Used for making video calls with supportive web
applications.
2
Microphone Used for receiving audio or audio input.
32
Table of Contents
32
No. Components Descriptions
3
Touch screen - Touch the screen to control the on-screen
congurations including menu items,applications,
buttons,keyboard and so on.
4Power button Press to power on / lock the smart display.
- Press about 0.5 seconds to power on the power.
- Lock the smart display when the display is on.
- Recall the unlock display when the smart display
is locked.
- When the display is on, press this button and
hold for about 3 seconds to shut down the smart
display (under Android mode).
5LED indicator - LED in blue when power on.
- LED turns into amber when smart display is
locked.
6
OSD Menu / Exit Press this button to launch the OSD conguration
menu and press again to exit.
7
Arrow Button
(Up / Right)
Use the arrow buttons (Up / Right and Down / Left)
to move through OSD menus. You can highlight a
menu item by pressing the arrow buttons. You can
also use the arrow buttons to adjust the values to
each item of OSD menu.
8
Arrow Button
(Down / Left)
9
Input Signal Switch
OSD Menu Select
Press to switch Input signal (Android/HDMI)
Select function in OSD menu.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Monitor de ViewSonic
ViewSonic
ViewSonic VX2260WM - 22" LCD Monitor Manual de usuario
ViewSonic
ViewSonic VA1703w Manual de usuario
ViewSonic
ViewSonic TD2420 Manual de usuario
ViewSonic
ViewSonic VG720 - 17" LCD Monitor Manual de usuario
ViewSonic
ViewSonic VT550 Manual de usuario
ViewSonic
ViewSonic VA2359 Manual de usuario
ViewSonic
ViewSonic VA2248-LED Guía de inicio rápido
ViewSonic
ViewSonic ViewBoard IFP50 Series Manual de usuario
ViewSonic
ViewSonic VA2212m-LED Manual de usuario
ViewSonic
ViewSonic P95f+ Guía de inicio rápido
ViewSonic
ViewSonic VX2450w-LED Manual de usuario
ViewSonic
ViewSonic VX2858Sml Manual de usuario
ViewSonic
ViewSonic Q201WB - Optiquest - 20" LCD Monitor Manual de usuario
ViewSonic
ViewSonic VG2728wm Manual de usuario
ViewSonic
ViewSonic VSD220 Manual de usuario
ViewSonic
ViewSonic VSD221 Manual de usuario
ViewSonic
ViewSonic VX2255WMH Manual de usuario
ViewSonic
ViewSonic OptiSync VX710 Guía de referencia
ViewSonic
ViewSonic A110 Manual de usuario
ViewSonic
ViewSonic VS18325 Manual de usuario
