Viessmann Vitodens 111-W Guía rápida
Installation and service
instructions
for contractors
VIESMANN
Vitodens 111-W
Type B1LB, 6.5 to 35.0 kW
Gas condensing storage combi boiler
Natural gas and LPG version
Gas Council Number: 47-819-36, 47-819-37
For applicability, see the last page
VITODENS 111-W
5677 219 GB 3/2015 Please keep safe.
2
Please follow these safety instructions closely to prevent accidents and mate-
rial losses.
Safety instructions explained
Danger
This symbol warns against the
risk of injury.
!Please note
This symbol warns against the
risk of material losses and envi-
ronmental pollution.
Note
Details identified by the word "Note" con-
tain additional information.
Target group
These instructions are exclusively inten-
ded for authorised contractors.
■ Work on gas installations must only be
carried out by a registered gas fitter.
■ Work on electrical equipment must
only be carried out by a qualified elec-
trician.
■ The system must be commissioned by
the system installer or a qualified per-
son authorised by the installer.
Regulations to be observed
■ National installation regulations
■ Statutory regulations for the preven-
tion of accidents
■ Statutory regulations for environmen-
tal protection
■ Codes of practice of the relevant trade
associations
■ All current safety regulations as
defined by DIN, EN, DVGW, TRGI,
TRF, VDE and all locally applicable
standards
aÖNORM, EN, ÖVGW-TR Gas,
ÖVGW-TRF and ÖVE
cSEV, SUVA, SVGW, SVTI,
SWKI, VKF and EKAS guideline
1942: LPG, part 2
Safety instructions for working on the
system
Working on the system
■ Where gas is used as the fuel, close
the main gas shut-off valve and safe-
guard it against unintentional reopen-
ing.
■ Isolate the system from the power sup-
ply, e.g. by removing the separate fuse
or by means of a mains isolator, and
check that it is no longer 'live'.
■ Safeguard the system against recon-
nection.
Danger
Hot surfaces can cause burns.
■ Before maintenance and serv-
ice work, switch OFF the appli-
ance and let it cool down.
■ Never touch hot surfaces on
the boiler, burner, flue system
or pipework.
Safety instructions
Safety instructions
5677 219 GB
3
!Please note
Electronic assemblies can be
damaged by electrostatic dis-
charge.
Prior to commencing work, touch
earthed objects such as heating
or water pipes to discharge static
loads.
Repair work
!Please note
Repairing components that fulfil a
safety function can compromise
the safe operation of the sys-
tem.
Replace faulty components only
with genuine Viessmann spare
parts.
Auxiliary components, spare and
wearing parts
!Please note
Spare and wearing parts that
have not been tested together
with the system can compromise
its function. Installing non-author-
ised components and making
non-approved modifications or
conversions can compromise
safety and may invalidate our
warranty.
For replacements, use only orig-
inal spare parts supplied or
approved by Viessmann.
Safety instructions for operating the
system
If you smell gas
Danger
Escaping gas can lead to explo-
sions which may result in serious
injury.
■ Never smoke. Prevent naked
flames and sparks. Never
switch lights or electrical appli-
ances on or off.
■ Close the gas shut-off valve.
■ Open windows and doors.
■ Evacuate any people from the
danger zone.
■ Notify your gas or electricity
supply utility from outside the
building.
■ Have the power supply to the
building shut off from a safe
place (outside the building).
If you smell flue gas
Danger
Flue gas can lead to life threat-
ening poisoning.
■ Shut down the heating system.
■ Ventilate the installation site.
■ Close doors to living spaces to
prevent flue gases from
spreading.
Safety instructions
Safety instructions (cont.)
5677 219 GB
4
What to do if water escapes from the
appliance
Danger
When water escapes from the
appliance there is a risk of elec-
trocution.
Switch off the heating system by
means of an external isolator (for
example fuse box, domestic
power distribution).
Flue systems and combustion air
Ensure that flue systems are clear and
cannot be sealed, for instance due to
accumulation of condensate or other
causes. Ensure an adequate supply of
combustion air.
Instruct system users that subsequent
modifications to the building characteris-
tics are not permissible (e.g. cable/pipe-
work routing, cladding or partitions).
Danger
Leaking or blocked flue systems,
or an inadequate supply of com-
bustion air can cause life threat-
ening poisoning from carbon
monoxide in the flue gas.
Ensure the flue system is in good
working order. Apertures for sup-
plying combustion air must be
non-closable.
Extractors
Operating appliances that extract air to
the outside (cooker hoods, extractors, air
conditioning units, etc.) can create neg-
ative pressure. If the boiler is operated at
the same time, this can lead to reverse
flow of the flue gas.
Danger
The simultaneous operation of
the boiler and appliances that
extract air to the outside can
result in life threatening poison-
ing due to reverse flow of the flue
gas.
Fit an interlock circuit or take suit-
able steps to ensure an adequate
supply of combustion air.
Safety instructions
Safety instructions (cont.)
5677 219 GB
5
Installation instructions
Information
Disposal of packaging.......................................................................................... 7
Symbols................................................................................................................ 8
Intended use......................................................................................................... 9
Product information.............................................................................................. 9
Preparing for boiler installation............................................................................. 11
Installation sequence
Fitting the wall mounting bracket.......................................................................... 13
Mounting the boiler and making the connections................................................. 14
Opening the control unit enclosure....................................................................... 20
Electrical connections........................................................................................... 21
Service instructions
Commissioning, inspection, maintenance
Steps - commissioning, inspection and maintenance.......................................... 25
Further details regarding the individual steps....................................................... 27
Troubleshooting
Function sequence and possible faults................................................................ 54
Fault display......................................................................................................... 55
Repairs................................................................................................................. 59
Gas type conversion
Converting from LPG to natural gas..................................................................... 68
Control unit
Functions and operating conditions in weather-compensated mode................... 70
Designs
Connection and wiring diagram............................................................................ 72
Parts lists
Ordering parts...................................................................................................... 74
Overview of assemblies....................................................................................... 75
Casing assembly.................................................................................................. 76
Heat cell assembly............................................................................................... 78
Burner assembly.................................................................................................. 80
Hydraulic assembly.............................................................................................. 82
Aqua-plate assembly............................................................................................ 84
Control unit assembly........................................................................................... 86
Index
Index
5677 219 GB
6
Cylinder module assembly................................................................................... 88
Cylinder assembly................................................................................................ 90
Miscellaneous....................................................................................................... 91
Specification....................................................................................................... 92
Disposal
Final decommissioning and disposal.................................................................... 93
Certificates
Declaration of conformity...................................................................................... 94
Keyword index.................................................................................................... 95
Index
Index (cont.)
5677 219 GB
7
Please dispose of waste packaging in
line with statutory regulations.
Information
Disposal of packaging
5677 219 GB
Installation
8
Sym-
bol
Meaning
Reference to other document
containing further information
1.
Step in a diagram:
The numbers correspond to the
order in which the steps are car-
ried out.
Warning of material losses and
environmental pollution
Live electrical area
Pay particular attention.
■ Component must audibly
click into place.
or
■ Acoustic signal
■ Fit new component.
or
■ In conjunction with a tool:
Clean the surface.
Dispose of component correct-
ly.
Dispose of component at a suit-
able collection point. Do not
dispose of component in do-
mestic waste.
Information
Symbols
5677 219 GB
9
The appliance is only intended to be
installed and operated in sealed unven-
ted heating systems that comply with
EN 12828, with due attention paid to the
associated installation, service and
operating instructions. It is only designed
for the heating of water that is of potable
water quality.
Intended use presupposes that a fixed
installation in conjunction with permissi-
ble, system-specific components has
been carried out.
Commercial or industrial usage for a pur-
pose other than heating the building or
DHW shall be deemed inappropriate.
Any usage beyond this must be
approved by the manufacturer in each
individual case.
Incorrect usage or operation of the appli-
ance (e.g. the appliance being opened
by the system user) is prohibited and will
result in an exclusion of liability. Incorrect
usage also occurs if the components in
the heating system are modified from
their intended use (e.g. if the flue gas and
ventilation air paths are sealed).
Product information
Vitodens 111-W, type B1LB
Preset for operation with natural gas.
Conversion to LPG P requires a gas con-
version kit.
Conversion for other countries
The Vitodens 111-W must only be deliv-
ered to the countries specified on the
type plate. For deliveries to alternative
countries, an approved contractor must
arrange individual approval on his/her
own initiative and in accordance with the
law of the country in question.
Product description
The Vitodens 111-W is equipped with a
cylinder and an integral plate heat
exchanger as cylinder loading system for
DHW heating. For the connection of
heating circuits and DHW line, see
page 15 onwards.
In the delivered condition, the
Vitodens 111-W is set up for operation
with constant boiler water temperature.
By connecting an outside temperature
sensor (accessories), the boiler can be
operated in weather-compensated
mode.
Information
Intended use
5677 219 GB
Installation
10
The appliance is equipped with a sealed
unvented hydraulic system with 2 con-
nections for heating flow and return and
2 connections for DHW heating.
The following components are integra-
ted into the hydraulic system:
■ Circulation pump
■ 3-way diverter valve
■ Safety valve
■ Heating water expansion vessel and
DHW expansion vessel
■ Cylinder and plate heat exchanger for
DHW heating
Connecting accessories
Outside temperature sensor and time
switch are connected with low voltage to
the control unit.
Information
Product information (cont.)
5677 219 GB
Otros manuales para Vitodens 111-W
8
Tabla de contenidos
Otros manuales de Caldera de Viessmann
Viessmann
Viessmann EVO-COOL Series Manual de usuario
Viessmann
Viessmann Vitorond 200 VD2 320 Instrucciones de funcionamiento
Viessmann
Viessmann Vitodens 200 WB2 11-44 Manual de usuario
Viessmann
Viessmann Vitodens 200-W System Guía rápida
Viessmann
Viessmann VITOCROSSAL 300 Manual de usuario
Viessmann
Viessmann Vitodens 100-W Guía rápida
Viessmann
Viessmann Vitodens 200-W System Instrucciones de funcionamiento
Viessmann
Viessmann Vitoplex 100-LS SXD Manual de servicio
Viessmann
Viessmann Vitodens 300 Manual de usuario
Viessmann
Viessmann VITOROND 200 Manual de instrucciones
Viessmann
Viessmann VITOPEND 222 WHSA Manual de usuario
Viessmann
Viessmann Vitodens 200-W B2HA 100 Manual de instrucciones
Viessmann
Viessmann Vitodens 200-W System Manual de usuario
Viessmann
Viessmann VITOCELL 100-U Manual de usuario
Viessmann
Viessmann VITOROND 100 VR1 Series Manual de instrucciones
Viessmann
Viessmann Vitodens 200-W System Guía de inicio rápido
Viessmann
Viessmann VITODENS 200 WB2A Nota de publicación
Viessmann
Viessmann VITOLIGNO 300-C Guía rápida
Viessmann
Viessmann Vitocrossal 300 Series Instrucciones de funcionamiento
Viessmann
Viessmann VITODENS 200 Manual de usuario
