Viessmann Vitodens 100-W Guía rápida
Installation and service
instructions
for contractors
VIESMANN
Vitodens 100-W
Type BPJA, 6.5 to 25.0 kW
Wall mounted gas condensing boiler
Natural gas and LPG version
Gas Council no.: 41-819-30, 25 kW; 41-819-31, 29 kW
For applicability, see the last page
VITODENS 100-W
5609 913 GB 1/2012 Please keep safe.
2
Please follow these safety instructions closely to prevent accidents and mate-
rial losses.
Safety instructions explained
Danger
This symbol warns against the
risk of injury.
!Please note
This symbol warns against the
risk of material losses and envi-
ronmental pollution.
Note
Details identified by the word "Note" con-
tain additional information.
Target group
These instructions are exclusively
designed for qualified personnel.
■ Work on gas equipment must only be
carried out by a qualified gas fitter.
■ Work on electrical equipment must
only be carried out by a qualified elec-
trician.
■ The system must be commissioned by
the system installer or a qualified per-
son authorised by the installer.
Regulations
Observe the following when working on
this system
■ all legal instructions regarding the pre-
vention of accidents,
■ all legal instructions regarding envi-
ronmental protection,
■ the Code of Practice of relevant trade
associations,
■ all current safety regulations as
defined by DIN, EN, DVGW, TRGI,
TRF, VDE and all locally applicable
standards,
■ Gas Safety (Installation & Use) Regu-
lations
– the appropriate Building Regulation
either the Building regulations, the
Building Regulation (Scotland),
Building Regulations (Northern Ire-
land),
– the Water Fittings Regulation or
Water Bylaws in Scotland,
– the current I.E.E. Wiring Regula-
tions.
If you smell gas
Danger
Escaping gas can lead to explo-
sions which may result in serious
injury.
■ Never smoke. Prevent naked
flames and sparks. Never
switch lights or electrical appli-
ances ON or OFF.
■ Close the gas shut-off valve.
■ Open windows and doors.
■ Remove all people from the
danger zone.
■ Notify your gas or electricity
supplier from outside the build-
ing.
■ Shut off the electricity supply to
the building from a safe place
(outside the building).
Safety instructions
Safety instructions
5609 913 GB
3
If you smell flue gas
Danger
Flue gas can lead to life-threat-
ening poisoning.
■ Shut down the heating system.
■ Ventilate the boiler room.
■ Close all doors leading to the
living space.
Working on the system
■ When using gas as fuel, also close the
main gas shut-off valve and safeguard
against unauthorised reopening.
■ Isolate the system from the power sup-
ply and check that it is no longer 'live',
e.g. by removing a separate fuse or by
means of a main isolator.
■ Safeguard the system against unau-
thorised reconnection.
!Please note
Electronic modules can be dam-
aged by electro-static dis-
charges.
Touch earthed objects, such as
heating or water pipes, to dis-
charge static loads.
Repair work
!Please note
Repairing components which ful-
fil a safety function can compro-
mise the safe operation of your
heating system.
Replace faulty components only
with original Viessmann spare
parts.
Ancillary components, spare and
wearing parts
!Please note
Spare and wearing parts which
have not been tested together
with the heating system can com-
promise its function. Installing
non-authorised components and
non-approved modifications/con-
version can compromise safety
and may invalidate our warranty.
For replacements, use only orig-
inal spare parts from Viessmann
or those which are approved by
Viessmann.
Safety instructions
Safety instructions (cont.)
5609 913 GB
4
Installation instructions
Product information........................................................................................... 6
Preparing for installation................................................................................... 7
Installation sequence
Fitting the boiler and making connections............................................................ 10
Opening the control unit casing............................................................................ 15
Electrical connections........................................................................................... 16
Service instructions
Commissioning, inspection, maintenance
Steps - commissioning, inspection and maintenance.......................................... 19
Further details regarding the individual steps....................................................... 20
Troubleshooting
Function sequence and possible faults................................................................ 38
Fault messages on the display............................................................................. 39
Repairs................................................................................................................. 43
Gas type conversion
Converting from LPG to natural gas .................................................................... 51
Designs
Connection and wiring diagram............................................................................ 53
Parts lists
Ordering parts...................................................................................................... 55
Overview of the assemblies................................................................................. 56
Sheet metal parts assembly................................................................................. 57
Heat cell assembly............................................................................................... 58
Burner assembly.................................................................................................. 59
Hydraulic assembly.............................................................................................. 61
Combi hydraulic assembly................................................................................... 63
Control unit assembly........................................................................................... 64
Miscellaneous assembly...................................................................................... 65
Specification....................................................................................................... 66
Certificates
Declaration of conformity...................................................................................... 67
Index
Index
5609 913 GB
5
Keyword index.................................................................................................... 68
Index
Index (cont.)
5609 913 GB
6
Vitodens 100-W, type BPJA
Preset for operation with natural gas.
Conversion to LPG P requires a gas con-
version kit.
Conversion for other countries
The Vitodens 100-W should generally
only be delivered to those countries
specified on the type plate. For deliveries
to alternative countries, an approved
contractor, on his own initiative, must
arrange individual approval in accord-
ance with the law of the country in ques-
tion.
Product description
The Vitodens 100-W is available as a
gas condensing combi boiler with inte-
gral plate heat exchanger for DHW heat-
ing. For the connection of heating circuits
and the DHW line, see from page 9.
The Vitodens 100-W is set up for opera-
tion with constant boiler water tempera-
ture.
The following are integrated: one sealed
unvented hydraulic system with 2 con-
nections for heating flow and return and
2 connections for DHW heating.
If the Vitodens 100-W is installed in an S
plan or Y plan system, both of the inter-
nal connections must be sealed off, as
they are not required.
The following components are integra-
ted into the hydraulic system:
■ Circulation pump
■ 3-way diverter valve
■ Safety valve
■ Diaphragm expansion vessel
■ Plate heat exchanger for DHW heating
Connection accessories
A time switch is connected with low volt-
age to the control unit.
Product information
Product information
5609 913 GB
7
Preparing for the boiler installation
Dimensions and connections
34
5
250
68
400
700
58 58
123123
B
AC E
F
D
156
350
125
860
AHeating flow 7 22 mm compression
fitting
BHot water 7 15 mm compression
fitting
CGas connection 7 22 mm
DCold water 7 15 mm compression
fitting
EHeating return 7 22 mm compres-
sion fitting
FCondensate drain/safety valve
drain: Plastic hose 7 22 mm
Preparing for installation
Preparing for installation
5609 913 GB
Installation
8
Fitting the wall mounting bracket
250
A
Ø10
187
AVitodens installation template
Preparing for installation
Preparing for installation (cont.)
5609 913 GB
9
1. Align the supplied installation tem-
plate on the wall.
2. Mark out the rawl plug holes.
3. Drill 7 10 mm holes and insert the
supplied rawl plugs.
4. Fit wall mounting bracket with screws
supplied.
Fit installation aid or mounting frame
Installation aid or mounting frame
installation instructions
Preparing the connections
!Please note
To prevent equipment damage,
install all pipework free of load
and torque stresses.
1. Prepare the water connections. Flush
the heating system.
2. Prepare the gas connection.
3. Prepare the electrical connections.
■Power cable NYM-J 3 x 1.5 mm2.
■ Accessory cables:
NYM-O 2-core min. 0.5 mm2.
Preparing for installation
Preparing for installation (cont.)
5609 913 GB
Installation
10
Removing the front panel and mounting the boiler
2x
2.
3.
1.
1. Undo screws at the bottom of the
boiler; do not remove completely.
2. Remove front panel.
3. Hook the boiler into the wall mounting
bracket.
Installation sequence
Fitting the boiler and making connections
5609 913 GB
Otros manuales para Vitodens 100-W
41
Tabla de contenidos
Otros manuales de Caldera de Viessmann
Viessmann
Viessmann Vitodens 100 Manual de usuario
Viessmann
Viessmann KOB PYROTEC Guía de inicio rápido
Viessmann
Viessmann Vitocell 050-E Guía rápida
Viessmann
Viessmann Vitomax HW Series Manual de capacitación
Viessmann
Viessmann VITOCELL 100-U Instrucciones de funcionamiento
Viessmann
Viessmann VITOCROSSAL 300 Manual de usuario
Viessmann
Viessmann VITOCELL-V 100 Manual de usuario
Viessmann
Viessmann Vitodens 111-W Guía rápida
Viessmann
Viessmann VITOCELL 300B Manual de instrucciones
Viessmann
Viessmann VITOCELL 300-H Manual de instrucciones
Viessmann
Viessmann B2TF Guía rápida
Viessmann
Viessmann Vitocrossal 200 Series Instrucciones de funcionamiento
Viessmann
Viessmann VITODENS Guía de inicio rápido
Viessmann
Viessmann VITOFLEX 300-RF Manual de instrucciones
Viessmann
Viessmann KOB Pyromat ECO Instrucciones de funcionamiento
Viessmann
Viessmann VITOLIGNO 300-C Manual de usuario
Viessmann
Viessmann PYROMAT ECO Guía de inicio rápido
Viessmann
Viessmann VITOCROSSAL 300 Manual de usuario
Viessmann
Viessmann Vitodens 200 WB2 11-44 Manual de usuario
Viessmann
Viessmann Vitocrossal 300 CU3A Guía del usuario
