Videosystems VSD-31 Manual de usuario
The most stable and reliable real stand alone Digital Video Multiplex Recorder
Stand Alone DVR
4Ch Real time / Triplex / Mux
VER 1.2
User’s Manual
4 Channel Stand Alone DVR
USB Backup available
VSD-31
1
4Ch Real time/Triplex/Mux - Stand Alone DVR
INSTALLATION & SAFEGUARDS
All the safety and operating instructions should be read before the unit is operated.
Environment Condition for Installation
1. To prevent electric shock or other hazard, do not expose units to rain, moisture, or dust.
2. Place this unit in a well-ventilated place and do not place heat-generating objects on this unit.
3. This unit should not be located in an area where it is likely to be subjected to mechanical shocks.
Before You Start
1. Ensure the power switch is in the OFF position prior to starting.
2. Do not attempt to open or remove the covers. That may expose you to dangerous voltage or
other hazards.
3. Installation should be performed by qualified service personnel only.
4. This unit should be operated only from the type of power source indicated on the manufacturer’s
label and with the power supply included with the unit.
Notice
1. Before initial configuration or operation you must first set the TIME/DATE, followed by HDD clear.
If you don’t follow this steps first, that may cause non recording on the HDD or non saving
setting value. Even though it is recorded, you cannot search recorded data.
2. When it comes to HDD capacity, you can use a big size of HDD.
3. A jumper setting for CD-RW must be master.
4. When you set the record setup, you have to set the Record Configuration and also Schedule
Setup. This unit records as per the Record type & Schedule setup. The default setting value for
Schedule setup is Continuous mode.
Installation & Safeguards
2
4Ch Real time/Triplex/Mux - Stand Alone DVR Contents
Contents
11----------------------------------------------------------------Other External Device5)
16----------------------------------------------------------------Search4-7.
17----------------------------------------------------------------PTZ Camera Operation4-8.
15----------------------------------------------------------------Playback4-6.
15----------------------------------------------------------------Record4-5.
14----------------------------------------------------------------ZOOM View4)
13----------------------------------------------------------------Display Configuration4-3.
12----------------------------------------------------------------Factory Default4-2.
12----------------------------------------------------------------System Log In4-1.
14----------------------------------------------------------------PIP View3)
14----------------------------------------------------------------SEQ2)
14----------------------------------------------------------------Full / Multiple View1)
14----------------------------------------------------------------Live View Setup4-4.
17----------------------------------------------------------------Data Back-up4-9.
12----------------------------------------------------------------OperationCHAP. 4
11----------------------------------------------------------------RS-232 ASCII-Code6)
10----------------------------------------------------------------Power4)
10----------------------------------------------------------------Monitor3)
9----------------------------------------------------------------Camera2)
9----------------------------------------------------------------HDD(Hard Disk Drive)1)
9----------------------------------------------------------------Detailed Installation3-2.
8----------------------------------------------------------------Installation Configuration3-1.
8----------------------------------------------------------------InstallationCHAP. 3
7----------------------------------------------------------------Rear2-2.
6----------------------------------------------------------------Front2-1.
6----------------------------------------------------------------Function of Each ButtonCHAP. 2
5----------------------------------------------------------------Package Contents1-2.
4----------------------------------------------------------------Features1-1.
4----------------------------------------------------------------Features & Package ContentsCHAP. 1
3
4Ch Real time/Triplex/Mux - Stand Alone DVR
20----------------------------------------------------------------OSD Setup2)
21----------------------------------------------------------------Record Setup1)
22----------------------------------------------------------------Schedule Setup2)
21----------------------------------------------------------------Record5-3.
29----------------------------------------------------------------CDR Setup1)
29----------------------------------------------------------------USB Setup2)
31----------------------------------------------------------------DVR Network Configuration6-1.
35----------------------------------------------------------------Remote Viewer Program6-2.
49----------------------------------------------------------------Web Backup Player7-4.
51----------------------------------------------------------------Web Backup7-5.
48----------------------------------------------------------------Web Viewer7-3.
44----------------------------------------------------------------DDNS Setup in DVR7-2.
42----------------------------------------------------------------Registering DVR for DDNS7-1.
42----------------------------------------------------------------Web Viewer SetupCHAP. 7
54----------------------------------------------------------------SpecificationsCHAP. 8
28----------------------------------------------------------------Pan Tilt Zoom Setup2)
26----------------------------------------------------------------Alarm Setup6)
26----------------------------------------------------------------Password Setup7)
25----------------------------------------------------------------Motion Setup4)
26----------------------------------------------------------------Interval Setup5)
24----------------------------------------------------------------Camera Setup3)
24----------------------------------------------------------------Time/Date Setup2)
40----------------------------------------------------------------Backup CD Player6-3.
30----------------------------------------------------------------Firmware Upgrade5-6.
29----------------------------------------------------------------Back up5-5.
31----------------------------------------------------------------Network SetupCHAP. 6
28----------------------------------------------------------------Spot Setup3)
27----------------------------------------------------------------TCP/IP Setup1)
27----------------------------------------------------------------External Device Setup5-4.
23----------------------------------------------------------------HDD Management1)
23----------------------------------------------------------------Configuration5-3.
19----------------------------------------------------------------Screen Display Setup2)
19----------------------------------------------------------------VGA Setup1)
19----------------------------------------------------------------Display Setup5-2.
18----------------------------------------------------------------General Operation5-1.
18----------------------------------------------------------------Set upCHAP. 5
Contents
4
4Ch Real time/Triplex/Mux - Stand Alone DVR
CHAP 1. Features & Package Contents
1-1. Features
CHAP 1. Features & Package Contents
Live Display
Real time display per camera
Auto Sequence
PIP (Picture in picture)
Digital Zoom of display
Simple playback mode
Simple PTZ camera control
Record
Variable Record resolution (For higher picture quality or higher recording speed)
Efficient Image Quality step in 5 steps
Schedule recording
Event Record by alarm and motion detection
Network
Monitoring and Search by using Remote Viewer via network
Playback
Search and playback by recorded data size and date/time
Various steps in forward playback speed (X2, X4, X8, X16, X32 fast playback. 1/16, 1/8 ,1/4,
1/2 slow playback)
Various steps in backward playback speed (X2, X4, X8, X16, X32 fast playback. 1/16, 1/8, 1/4,
1/2 slow playback)
Data backup
Simple backup using CD-RW
Remote viewer backup in AVI, JPEG file
Supports bigger capacity of HDD
USB Device Back-Up available
Others
Supports UNI-CODE
Supports SPOT Monitor
PAL/NTSC Auto detection
5
4Ch Real time/Triplex/Mux - Stand Alone DVR
1-2. Package Contents
1. DVR Main Unit
2. Power Cable
3. Power Adapter
4. User’s Manual
5. Software CD
6. Rubber Pad 7. HDD absorber 8. Bolts
A mouse controlling all functions of DVR9. Mouse
Bolts for fixing HDD8. Bolts
Absorbing the mechanical shock of HDD against the case bottom7. HDD absorber
Prevent DVR from slipping. Attach it to the bottom of main unit6. Rubber Pad
Remote Viewer Software & Backup CD Player5. Software CD
User’s Manual4. User’s Manual
DC power supply3. Power Adapter
AC power supply to adapters for 12V DC power2. Power Cable
Stand-Alone Digital Video Recorder1. DVR Main Unit
DescriptionPackage Contents
9. Mouse
CHAP 1. Features & Package Contents
6
4Ch Real time/Triplex/Mux - Stand Alone DVR
Shows status of operation③LED Lamps
Used for Data Backup and Firmware upgrade
④CD –RW
Used for Data Backup②USB HOST
Used for updating Firmware①USB Device
FunctionName
CHAP 2. Function of Each Button
2-1. Front
CHAP 2. Function of Each Button
USB
HDD FULL
POWER
7
4Ch Real time/Triplex/Mux - Stand Alone DVR
DC over 12V adapterDC Power8
Connection to ETHERNET deviceETHERNET3
Connection with PS/2 MOUSEPS/27
9
6
5
4
2
1
MONITOR
Output
CAMERA Input
RS-232C
SENSOR Input
Connection with PTZ camera or other external device using RS 485
interface
RS 485
VGA
SPOT Monitor
Output
Connection to VGA Monitor (CRT type or TFT LCD monitor)
Connection with Composite Monitor (NTSC / PAL)
Connection with Composite Monitor (NTSC / PAL)
Connection with camera (NTSC / PAL)
Connection to external device as PC using RS-232C to control the DVR
Sensor input terminal
Relay out terminal
RELAY Output
FunctionName
2-2. Rear
CHAP 2. Function of Each Button
8
4Ch Real time/Triplex/Mux - Stand Alone DVR
3-1. Installation Configuration
CHAP. 3 Installation
CHAP.3 Installation
9
4Ch Real time/Triplex/Mux - Stand Alone DVR
1) HDD
3-2. Detailed Installation
1. Connect Main Board and HDD1 using IDE cable and HDD power cable.
2. The jumper setting of HDD should be on Master when you install HDD.
3. Stick the HDD absorber (included in package) on the bottom of case and then install the
HDD on top of them by using the bolts (included in package).
4. Screws must be inserted from outside of the case bottom.
CHAP. 3 Installation
2) Camera
Connect camera to the camera input on rear panel of DVR marked CAMERA IN.
Tabla de contenidos
Otros manuales de DVR de Videosystems
