VideoLogic Captivator PCI Manual de usuario
- 1 -
Captivator PCI User Guide
Contents
Introduction ............................................................................ 2
Installing Captivator PCI ............................................................. 4
Setting up Captivator PCI ............................................................ 8
Technical details .................................................................... 10
Troubleshooting ..................................................................... 13
Technical support .................................................................... 14
Index .................................................................................. 15
- 2 -
Captivator PCI User Guide
Introduction
Captivator PCI, VideoLogic’s PCI-based video capture card, supports the S-Video and
composite video signal formats to provide you with low-cost videoconferencing and
video capture.
Captivator PCI
Captivator PCI is a PCI-based video capture card that is supplied with trial versions of the
most popular videconferencing software packages. By connecting your video source to the
card, you can communicate through your existing Internet server with other people on
the Internet.
Video editing is provided by over $300-worth of Prolab™multimedia software. You can capture
AVI video clips or video stills, and, with the VideoWork software, you can edit these clips on a
frame-by-frame basis to create your own video sequences, or use the Image Folio software to
edit your video stills and convert them to various formats including BMP, JPG and GIF.
Captivator PCI/VC
The Captivator PCI/VC option includes all the software and hardware available with the basic
Captivator PCI kit, plus a high-quality Philips S-Video color camera and the professional
version of the VDOPhone™videoconferencing software from VDOnet.
Hardware requirements
To run Captivator PCI or the PCI/VC option you need an IBM or fully compatible Pentium 90 or
above running Windows 95, with at least 8 MB of RAM and a PCI graphics card with at least
2 MB of RAM, running DirectX 2 compliant drivers. It must comply with the PCI local bus
specification and have a spare PCI bus slot.
- 3 -
Captivator PCI User Guide
Before you continue
Make sure you read the latest product information in the file \cappci\win95\disk1\readme.doc
on the VideoLogic Software Library CD-ROM.
The VideoLogic Interactive Installation Guide
The Interactive Installation Guide ensures that the correct drivers are installed and gives you
access to other relevant software. It replaces the Windows Plug and Play feature, which
installs the drivers and then leaves you to install other software. You can use either method to
install the software, but we recommend using the Interactive Installation Guide.
Handling Captivator PCI
Follow these guidelines to minimize the risk of electrostatic charges damaging the card:
•Keep the card in its protective packaging until you are ready to install it.
•Just before handling the card, touch the metal frame of your PC with the back of your
hand to discharge any static electricity which may have built up on you or your clothes.
•Hold the card by the adapter bracket or by its edges; do not touch the circuit board.
•Do not place the card on top of your computer or on any other metal surface.
•Make sure that the card is not accidentally touched by anyone else.
•Handle the card with care to avoid damage to the components on the circuit board.
- 4 -
Captivator PCI User Guide
Installing Captivator PCI
Installing the hardware
Warning: Always switch off your computer before removing the cover and observe the
warnings specified in the manufacturer’s documentation.
The following diagram shows the connectors on the card:
audio out
audio out
composite video in
PCI bus
S-video or composite video in
(for manufacturer’s use only)
composite video out
1. Switch off your computer, monitor, and any hardware devices such as printers connected
to your computer. Leave the power cable connected to the power outlet so that your
computer is grounded.
- 5 -
Captivator PCI User Guide
2. Remove the cover from your computer. You may need to refer to the documentation
supplied with your computer for instructions on how to do this.
3. Locate an empty PCI bus expansion slot and remove the slot cover. Keep the screw, you
will need it later to secure the card.
4. Touch the bare metal chassis of your computer with the back of your hand to discharge
any static that may have built up on you or your clothes.
5. Align the card with the slot you have chosen. Firmly press it into the slot, as shown in the
diagram below. You will need to use some pressure to push the card into position, but do
not use excessive force.
6. Secure the card using the screw that you removed previously.
7. Replace the cover of your computer.
8. Switch on your computer and your computer monitor. You are now ready to install the
software, as explained on page 6.
- 6 -
Captivator PCI User Guide
Installing the software
Installing using the Interactive Installation Guide
1. When your computer has restarted, a window is displayed saying that Windows has found
new hardware, and requests the drivers. Click Cancel.
2. A message is displayed saying that the drivers are not installed. Click OK.
3. When your desktop is available, insert the VideoLogic CD-ROM into your CD-ROM drive.
The Interactive Installation Guide should automatically run. If not, run the file instaler.exe
in the root directory of the CD-ROM.
4. Follow the on-screen instructions in the Installation Guide to install Captivator PCI.
This includes installing the Prolab multimedia sofware if you want to use it.
When you have completed the Interactive Installation Guide, Captivator PCI is
ready to use.
Installing using Windows Plug and Play
1. When your computer has restarted, a dialog box is displayed saying that Windows has
found new hardware, and requests the drivers. Select Driver from Disk provided by
Hardware Manufacturer, and click OK.
2. Insert the VideoLogic Software Library CD-ROM into your CD-ROM drive.
3. Browse to the folder \cappci\win95\disk1 on the CD-ROM. After browsing, click OK.
4. At the Install From Disk dialog box, click OK. The drivers are copied from the CD-ROM.
When your desktop becomes available, Captivator PCI is ready to use.
- 7 -
Captivator PCI User Guide
Multimedia and videoconferencing software
Multimedia software
The Prolab™multimedia software consists of three applications: VideoWork, for video editing;
MediaScope, an on-screen CD-player; and Image Folio, for processing scanned images and
video stills.
Interactive installation
You can install the Prolab suite by clicking the yellow Prolab button in the Interactive
Installation Guide of the VideoLogic Software Library CD-ROM.
Manual installation
Install each application by running the following install.exe files on the VideoLogic Software
Library CD-ROM. Refer to the manual.pdf file for instructions on how to use the software.
•VideoWork \prolab\videowrk\disk1\install.exe \prolab\videowrk\manual.pdf
•Image Folio \prolab\imgfolio\disk1\install.exe \prolab\imgfolio\manual.pdf
•MediaScope \prolab\mediascp\disk1\install.exe \prolab\mediascp\manual.pdf
Videoconferencing software
Captivator PCI comes with evaluation copies of market-leading videoconferencing software on
the VideoLogic Software Library CD-ROM. Refer to the file \cappci\win95\disk1\readme.doc for
further details about these packages, and how to install them.
The Captivator PCI/VC option comes with the professional version of VDOPhone on a
separate CD-ROM. To install this, run the file setup.exe in the root directory of the VDOPhone
CD-ROM. Refer to the on-line Help system and the VDOPhone pdf file on the
VDOPhone CD-ROM for instructions on how to use the software.
- 8 -
Captivator PCI User Guide
Setting up Captivator PCI
Audio/video through S-Video input, audio routed through external audio connector
Audio/video through S-Video input, audio routed through internal audio connector
S-Video in
audio out
audio in
Captivator PCI
Sound card
audio out
audio in
digital camera
- 9 -
Captivator PCI User Guide
Video through S-Video input, sound through sound card
Video through composite video input, sound through sound card
Captivator PCI
Sound card
composite video in
S-Video out
audio out
audio in
composite video out
4-pin to
8-pin cable
S-Video in
- 10 -
Captivator PCI User Guide
Technical details
Connecting the cables
The diagram below shows the external cable sockets:
external audio out
(3.5 mm jack)
composite video in
(phono)
S-video or composite video in
(8 pin mini-DIN)
Tabla de contenidos
Otros manuales de Tarjeta PCI de VideoLogic
Manuales populares de Tarjeta PCI de otras marcas
Belkin
Belkin F5D7000F Manual de usuario
Pericom
Pericom PI7C7100 Manual de usuario
ADLINK Technology
ADLINK Technology cPCI-3548 Manual de usuario
Digium
Digium TE200 Series Manual de usuario
Allo.com
Allo.com 2nd Gen E1/T1/J1 Manual de usuario
Western Digital
Western Digital FireWire PCI Adapter Manual de usuario