Vicon VN-NVR Shadow XX221-00-02 Manual de usuario

www.vicon-security.com

Installation and Operation Manual

XX221-00-02

ViconNet VN-NVR Shadow with

Internal RAID

Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the

operation will be entirely error free or perform precisely as described in the documentation. This system has not been designed

to be used in life-critical situations and must not be used for this purpose.

Vicon Industries Inc., 89 Arkay Drive, Hauppauge, New York 11788

Tel: 631-952-2288 Fax: 631-951-2288 Toll Free: 800-645-9116

24-Hour Technical Support: 800-34-VICON (800-348-4266) UK: 44/(0) 1489-566300

Document Number: 8009-8221-00-02

Product specications subject to change without notice.

Issued: 512

2| ViconNet VN-NVR Shadow Installation and Configuration Guide

NVR Shadow Installation & Configuration Guide

Topic Page

General 3

Hardware Installation 4

Accessory Kit 4

Unpacking and Inspection 5

Unpacking the Unit 5

Required Items for Installation 5

Unit Components 6

Mounting 8

Installing the VN-NVR 9

Operation 12

Powering On the Unit 12

Powering Off the Unit 12

Final Installation 12

Using ViconNet 13

Accessing the Configuration Functions 13

Registering Your Unit 15

Connecting to the Network 16

Setting up the Storage Database 17

Monitoring the RAID System 20

Replacing a Bad Database Drive 22

Replacing the OS Hard Drive 25

Shipping Instructions 29

Technical Information 30

Vicon Standard Equipment Warranty 32

Vicon, ViconNet, and their logos are registered trademarks of Vicon Industries Inc.

Windows is a registered trademark of Microsoft Corporation. Other company and brand products and service names

are trademarks or registered trademarks of their respective holders

ViconNet VN-NVR Shadow Installation and Configuration Guide | 3

General

This manual provides information for installing and setting up the ViconNet®

VN-NVR Shadow with internal RAIDs.

The NVR Shadow is a high-capacity Network Video Recorder that can

simultaneously capture, view and store high-quality, high-resolution voice,

video and data. It provides scalable, internal RAID-5 storage for medium and

large-scale installations. The 8-bay removable drive configuration makes it

easy to hot-swap drives without having to remove the unit from the rack.

4| ViconNet VN-NVR Shadow Installation and Configuration Guide

Hardware Installation

This unit should only be installed by a qualified technician using common

hand tools and approved materials in accordance with the National Electrical

Code ANSI/NFPA 70, state and local wiring codes. These units meet

requirements for an FCC Class A computing device and CE.

The rack-mount VN-NVR is a 2 RU unit that installs into a standard 19-inch

racking system.

Vicon requires the use of line conditioners, voltage regulators and

uninterruptible power supply (UPS) systems in the electrical power service.

Note

Read all instructions before beginning the installation.

Accessory Kit

The provided accessory kit contains necessary items needed to install and

wire the unit during installation:

Table 1: Accessory Kit

Part Description

CD and Manuals Provides documentation and software (including current

drivers)

Front Cover and Key Protects hard drives and releases the front cover

Keyboard (with USB

adapter) Used for GUI operation of the ViconNet software

Optical Mouse (with USB

adapter) Used for GUI operation of the ViconNet software

Power Cord Used for power connection

Rail Kit For rack mounting the VN-NVR; includes hardware

ViconNet VN-NVR Shadow Installation and Configuration Guide | 5

Unpacking and Inspection

All Vicon equipment is tested and inspected before leaving the factory. It is

the carrier’s responsibility to provide suitable delivery.

Inspect the cartons upon delivery and, if damage is present, make detailed

notes on the carrier’s bill. Then, obtain the carrier agent’s signature and file a

damage claim as soon as possible.

Open the cartons and inspect the equipment for damage. Save the cartons

and packing material. If damage is present, contact the carrier and file a

damage claim immediately. If the equipment must be returned for repair,

follow the Shipping Instructions at the end of this manual.

Unpacking the Unit

Carefully open the cartons. The RAID drives are preconfigured at the factory

but are removed from the unit for shipping. Remove the accessory kit and the

VN-NVR from the box and place them on a large, flat working surface. Open

the accessory kit and verify the contents against the list in Table 1.

Required Items for Installation

To setup for operation there must be a keyboard and a mouse available to

operate the GUI.

6| ViconNet VN-NVR Shadow Installation and Configuration Guide

Unit Components

This section describes the VN-NVR front and rear panels.

Front Panel Controls and Connections

•Network LED Indicators: Blue LED used to display the network connection

status (ON means unit on and OFF means unit off).

•HDD LED: Amber LED, blinks when disk is in use.

•Power LED Indicator: Green LED used to display the power status (ON

means unit on and OFF means unit off).

•Power Button:Used to power on the unit.

•Reset Button: Used to only in the case when the unit locks up.

•DVD Drive: Used as a high-capacity removable data drive.

•Front Cover: Used to protect the front panel from unauthorized use.

•Keyed Locks: Used with the provided key to lock the front cover.

•USB Port: Used for optional devices.

ViconNet VN-NVR Shadow Installation and Configuration Guide | 7

Rear Panel Controls and Connections

•Speaker Output: Mini phono-type connector used for audio output.

•Power Receptacle: Used to connect the provided power cable.

•Keyboard Port: connector used to connect a standard PC keyboard

(included).

•Mouse Port: connector used to connect the provided optical mouse

(included).

•USB Connectors: Used for optional devices (4).

•Network Port:RJ-45 connectors; use to connect to a LAN/WAN (100/1000

Base T).

8| ViconNet VN-NVR Shadow Installation and Configuration Guide

Mounting

Rack

The NVR Shadow was designed to be mounted in a standard 19-inch

(483 mm) wide vertical rack. A rail kit is installed onto the NVR to connect it

to the rack. Hardware and installation instructions on how to use this kit are

provided with the rail kit. The rail mounting kit is included to provide extra

support for the unit in the rack. This rail kit MUST be used.

Note

Rack mount ears and handles are installed on the NVR Shadow for ease of

installation.

It is recommended that at least 1 RU of space [1.75 in. (44.45 mm)] be left in

between multiple units mounted in the same rack for cooling purposes.

Warning

Failure to leave space for cooling between recorders may result in

malfunctioning and possible failure of the unit.

Install the two (2) rail kit mounting brackets onto the sides of the NVR

Shadow. Use the instructions supplied with the rail kit. The brackets have

slots and holes that fit directly onto the hardware on the sides of the unit.

Refer to figure below.

Note

Use the square holes in the rail kit for mounting. If this is not convenient, it

may be necessary to use a square hole to round hole adapter.

ViconNet VN-NVR Shadow Installation and Configuration Guide | 9

Installing the VN-NVR

After the unit is mounted permanently, follow the steps in this section to

install the hardware.

•Step 1: Installing the Drives

•Step 2: Connecting the Hardware

•Step 3: Connecting the Power Supply

Important Notes

Do not apply power or plug-in the unit to any outlet until instructed to do so.

Disable the AC power to prevent installer injury and damage to the unit.

Before beginning the hardware installation, ensure that the room or area

designated for the ViconNet hardware installation is well ventilated.

Step 1: Installing the Drives

The NVR Shadow is delivered with the 8 RAID drives packaged in the

accessory kit; some units may have the OS drive also packaged in the

accessory kit. Each of the drives (8 or 9) must be installed into the unit in the

correct bay for proper operation. Refer to the Front Panel figure for Bay

numbers.

Caution

The OS and RAID drives are configured at the factory and have to be

installed back into the correct bay.

Push the lock button to release the arm on the drive. Insert each tray into the

corresponding bay number. Secure the arm back into place.

Caution

Make sure that the serial number on the tray matches the serial number on

the VN-NVR Shadow. Each tray has a label indicating the serial number and

the bay number.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de red de Vicon

Vicon

Vicon KOLLECTOR PRO XG **128-33-00 Instrucciones de montaje

Vicon

Vicon SMS Enterprise Manual de usuario

Vicon

Vicon KollectorPro XG Guía de instalación

Vicon

Vicon Kollector Elite Manual de usuario

Vicon

Vicon Kollector Elite Manual de usuario

Vicon

Vicon NOVA 1500 Manual de usuario

Vicon

Vicon KollectorLite XG Instrucciones de montaje

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario