Viavito setry Manual de usuario
Owner’s Manual.
2-in-1 Elliptical Cross
Trainer Exercise Bike
SETRY
www.viavito.com
02
Congratulations
on purchasing your
very own SETRY
2-in-1 Elliptical Cross
Trainer Exercise Bike.
Manual Contents.
www.viavito.com
You have chosen a high quality, safe and
innovative product, and we are certain
it will keep you entertained for hours.
Please take the time to read this owner’s
manual as it will help you to get the most
out of your new product.
For more information, or if you require
any assistance please email us at
support@viavito.com
Safety Information 03/04
Machine Assembly 05/12
Contents Checklist 05
Assembly Instructions 06/12
Console Instructions 13/19
Button Functions 13
Display Functions 14
Operation 15/16
Training in Program Mode 17
Training in Manual Mode 17
Training in User Program Mode 18
Training in H.R.C Mode 19
Training in Watt Mode 19
Training in Body Fat Mode 19
Conditioning Guidelines 20/26
Why Exercise? 20
Target Heart Rate 21
Beginners Guide to Exercise 22
Workout Tips 22
How to Begin 23
How Hard Should You Work? 23
Tips For Stretching 24
Warm-Up and Cool-Down 25/26
Customer Support 27/28
Contact Information 27
Manufacturers Warranty 28
Space Required 29
Replacement Parts 30/36
Parts List 30/35
Exploded Diagram 36
03
Safety Information.
www.viavito.com
• Please read all instructions carefully
before using this product.
• Retain this manual for future reference.
vary slightly from the illustrations and
are subject to change without notice.
IMPORTANT SAFETY NOTICE:
note the following precautions
before using the product.
01 Assemble the machine exactly as the
descriptions in the instruction manual.
02 Check all the screws, nuts and other
connections before using the machine
trainer is in the safe condition.
03 Set up the machine in a dry level place
and keep it away from moisture and
water.
04 Place a suitable base (e.g. rubber
mat, wooden board etc.) beneath the
machine in the area of assembly to
avoid dirt etc.
05 Before beginning training, remove
all objects within a radius of 2 meters
from the machine.
06 DO NOT use aggressive cleaning
products such as detergents to clean
the machine, only use the supplied
tools to assemble the machine.
Remove drops of sweat from
the machine immediately
07 This machine is not suitable for
therapeutic or medical purpose.
08 Only do training on the machine as per
instructions. Use only original spare
parts for any necessary repairs.
09 This machine can be used by only one
person at a time.
10 Wear training clothes and shoes which
the machine.
11 WARNING! Heart rate monitoring
systems may be inaccurate. Over
exercising may result in serious
injury or death. If you feel faint
stop exercising immediately.
12 People such as children and disabled
persons should only use the machine
in the presence of another person
who can give aid and advice.
13 The power of the machine increases
with increasing the speed, and the
reverse. The machine is equipped with
a computer console which can adjust
the resistance. Reduce the resistance
by pressing the ‘down’ resistance key.
Increase the resistance by pressing
the ‘up’ resistance key.
04 www.viavito.com
14 The maximum user’s weight is 120kg.
15 This machine is for indoor, home
use only.
16 WARNING: the safety level of the
equipment can be maintained only if it
is examined regularly for damage and
wear, e.g. bearings, connection points.
17 Please examine the equipment
carefully before you use it, especially the
components most susceptible to wear,
e.g. handlebar, cranks, pedals and the
connection points frequently.
18 Please stop using the equipment
immediately if there are any defective
components and keep it out of use
before you replace the components
19 Unsupervised children should be kept
away from the equipment at all times.
20 WARNING! Excessive or Inappropriate
use or of this machine such as while
or not in line with instructions may result
serious injury or death.
21
around the exerciser when you set it up.
22 Please note that an improper and
excessive work-out may be harmful
to your health.
23 When adjusting the adjustable parts,
make sure they are adjusted properly
and note the marked, maximum
adjusting position, for example
of the saddle support, respectively.
Be sure to consult a physician before you
start any exercise program. He may give
you proper hints and advice with respect
to the individual intensity of stress for
you as well as to your work-out and
sensible eating habits.
RECYCLING INFORMATION
Used electrical and electronic equipment (WEEE) should not be mixed with general
household waste. For proper treatment, recovery and recycling, please take this
product to designated collection points where it will be accepted free of charge.
Alternatively, in some countries you may be able to return your products to your
local retailer upon purchase of an equivalent new product. Disposing of this product
correctly will help save valuable resources and prevent any potential negative
inappropriate waste handling. Please contact your local authority for further
details of your nearest designated collection point. Penalties may be applicable
for incorrect disposal of this waste, in accordance with your national legislation
SAFETY STANDARDS
This equipment meets the requirements of European safety directives such as: the
Electromagnetic Compatibility (EMC) Directive and the Low Voltage Directive (LVD).
05
www.viavito.com
Machine Assembly.
Contents Checklist Make sure you have the following parts:
06 www.viavito.com
Assembly Instructions
Attention: Please follow these assembly instructions step by step
to assemble this bike:
Step One.
01 Assemble the front stabiliser (F) and
rear stabiliser (G) onto the main frame
(D) by using the square neck bolt (N-1),
the curved washer (N-4), the spring
washer (N-3), and the cup nut (N-2)
02 Adjust the leg leveler height by turning
the wheel on rear foot cap
07
www.viavito.com
Step Two.
01 Fix the seat (U) onto seat post (V)
02 Insert the seat post(V) into main frame
08 www.viavito.com
Step Three.
01 Connect the upper computer cable
(C-3) to the lower computer (D-7),
then insert the handlebar post (C)
on the main frame
02 Assemble the pedal axle cover (N-16)
on the pedal axle
03 Fix the pedal axle onto main frame
using bolt (N-17)
09
www.viavito.com
Step Four.
01 Connect the movable handlebar
support (E) to the handlebar support
washer (N-3) and the waved washer (N-4)
02 Joint the moving handlebar(E)
with front post (C) through swing
axle (S) by using Waved washer
spring washer (N-3) and cap the
bolt cover (N-11)
10 www.viavito.com
Step Five.
01
the cover (O) on the handlebar post
(C) by using the curved washer (N-4),
the spring washer (N-3) and the
Allen bolt (N-5)
02 Feed the upper computer cable and
hand pulse cable out from the
handlebar post
Otros manuales para setry
1
Tabla de contenidos
Otros manuales de Bicicleta estática de Viavito
