Viavi IFR 4000 Manual de usuario

T.O. 33K3-4-3457-1

30 APRIL 2006

TECHNICAL MANUAL

CALIBRATION PROCEDURE

FOR

NAV/COMM TEST SET

IFR4000

(IFR AMERICAS INC)

This publication replaces T.O. 33K3-4-3457-1 dated 30 March 2005 and all subsequent changes.

Distribution Statement C - Distribution authorized to U. S. Government agencies and their contractors for

official use or for administrative or operational purposes only, 30 March 2005. Requests for this

document shall be referred to 562 CBSG/MLLW, 813 Irving-Wick Dr W, Heath, OH 43056-1199.

Destruction Notice - For unclassified, limited documents, destroy by any method that will prevent

disclosure of the contents or reconstruction of the document.

Published under Authority of the Secretary of the Air Force

T.O. 33K3-4-3457-1

INSERT LATEST CHANGED PAGES. DESTROY SUPERSEDED PAGES.

NOTE: The portion of the text and illustrations affected by the changes is indicated by a vertical

line in the outer margins of the page.

Date of issue for original and changed pages are:

Original......................0 ..........................30 April 2006

TOTAL NUMBER OF PAGES IN THIS PUBLICATION IS 26, CONSISTING OF THE FOLLOWING:

Page * Change Page * Change Page * Change

No. No. No. No. No. No.

Title ...................................0

A ........................................0

1 - 24..................................0

*Zero in this column indicates an original page

LIST OF EFFECTIVE PAGES

A USAF

T.O. 33K3-4-3457-1

NAV/COMM TEST SET

IFR4000

(IFR AMERICAS INC)

1 CALIBRATION DESCRIPTION:

Table 1.

Test Instrument (TI) Performance Test

Characteristics Specifications Method

RF Signal Generator

Output Frequency Range: Compared to a

VOR: Frequency Standard

107 to 118 MHz;

LOC:

107 to 113 MHz;

Marker Beacon:

72 to 78 MHz;

Comm VHF AM:

117 to 157 MHz;

G/S:

327 to 337 MHz;

Comm VHF FM:

155 to 175 MHz;

Comm UHF:

224 to 401 MHz;

SELCAL:

117 to 157 MHz

Accuracy: time base

±1 ppm when Autocal is performed

Output Level Measured with a

Power Meter, Power

ANT Connector Sensor and Microwave

Measurement System

Single Carrier Range: -67 to +13 dBm

Accuracy: ±3 dB

T.O. 33K3-4-3457-1

Table 1. (Cont.)

Test Instrument (TI) Performance Test

Characteristics Specifications Method

RF Signal Generator (Cont.)

Output Level (Cont.) Measured with a

Power Meter, Power

RF I/O Connector Sensor and Microwave

Measurement System

Single Carrier Range: -130 to -12 dBm

Accuracy:

-120 to -95 dBm, ±3 dB;

-94.5 to -40 dBm, ±2 dB;

-39.5 to -12 dBm, ±2.5 dB

Spectral Purity Measured with a

Spectrum Analyzer

Harmonics Range: 72 to 401 MHz

Accuracy: <-20 dBc

Non-Harmonics Range: 75 to 400 MHz

Accuracy: <-35 dBc

VOR Mode Measured with ILS/VOR

Signal Calibrator,

Tone Frequency Range: 30 Hz Ref, 30 Hz Var, Universal Counter and

1020 and 9960 Hz Audio Analyzer

Accuracy: ±0.02% of setting

AM Modulation Range: 30%,

30, 1020 and 9960 Hz;

10%, 1020 Hz Morse Code

Accuracy: In CAL position:

Modulation: ±2% AM;

Distortion: <2.5% THD *1

FM Modulation Range: 30 Hz Ref @ ±480 Hz

Peak Deviation on 9960 Hz sub-carrier

Accuracy: ±25 Hz peak deviation

See footnote at end of Table.

T.O. 33K3-4-3457-1

Table 1. (Cont.)

Test Instrument (TI) Performance Test

Characteristics Specifications Method

VOR Mode (Cont.) Measured with ILS/VOR

Signal Calibrator,

Bearing Range: 0.0°to 359.9°Universal Counter and

Audio Analyzer

Accuracy: ±0.1°

LOC Mode

Tone Frequency Range: 90, 150 and 1020 Hz

Accuracy: ±0.02% of setting

Modulation Range:

20% AM, 90 and 150 Hz;

30% AM, 1020 audio tone;

10% AM, 1020 Morse Code

Accuracy: In CAL position:

Modulation: ±2% AM;

Distortion: <2.5% THD

DDM

Fixed Range: ±0, 0.093, 0.155 or

0.200 DDM and Tone Delete

Accuracy: ≤+10 dBm output level,

±(0.0015 DDM +3% of setting)

Variable Range: ±0.4 DDM

Accuracy: ≤+10 dBm output level,

±(0.0025 DDM +3% of setting)

G/S Mode

Tone Frequency Range: 90 and 150 Hz

Accuracy: ±0.02% of setting

T.O. 33K3-4-3457-1

Table 1. (Cont.)

Test Instrument (TI) Performance Test

Characteristics Specifications Method

G/S Mode (Cont.) Measured with ILS/VOR

Signal Calibrator,

Universal Counter and

Modulation Range: 40% AM; Audio Analyzer

90 and 150 Hz

Accuracy: In CAL position:

Modulation: ±2% AM;

Distortion: <2.5% THD

DDM

Fixed Range: ±0, 0.091, 0.175 or

0.400 DDM and Tone Delete

Accuracy: ≤+10 dBm output level,

±(0.003 DDM + 3% of setting)

Variable Range: ±0.8 DDM

Accuracy: ≤+10 dBm output level,

±(0.0048 DDM + 3% of setting)

Marker Mode

Tone Frequency Range: 400, 1300 and 3000 Hz

Accuracy: ±0.02% of setting

Modulation Range: 95% AM;

400, 1300 and 3000 Hz

Accuracy: In CAL position:

Modulation: ±5% AM;

Distortion: <2.5% THD, single carrier

COMM Mode

Tone Frequency Range: 1020 Hz

Accuracy: ±0.02% of setting

T.O. 33K3-4-3457-1

Table 1. (Cont.)

Test Instrument (TI) Performance Test

Characteristics Specifications Method

COMM Mode (Cont.) Measured with ILS/VOR

Signal Calibrator,

Modulation Range: 30% AM, 1020 Hz Universal Counter and

Audio Analyzer

Accuracy: In CAL position:

Modulation: ±2% AM;

Distortion: <2.5% THD

Frequency Counter Verified during RF Signal

Generator Frequency

ANT and RF I/O input Range: 10 to 400 MHz; Output calibration

Connectors Resolution: 100 Hz

Accuracy:

Same as time base, ±1 dig

AUX I/O Connector Range: 1 to 10 MHz;

Resolution: 1 Hz

Accuracy:

Same as time base, ±1 dig

Power Meter Range: *2118.0 to 400.0 MHz, Measured on TI with

0.1 to 300 W; known signal applied

Resolution:

0.1 to <1 W, 0.01 W;

1 to <100 W, 0.1 W;

100 to 300 W, 1 W

Accuracy: *3

CW only (w/o ext attenuator),

±(8% of rdg + 1 dig)

AM Meter Range: 50 to 3000 Hz,

10 to 99% mod

Accuracy: ±10% of rdg

FM Meter Range: 50 to 3000 Hz,

1 to 15 kHz dev

Accuracy: ±(0.4 kHz + 8% of rdg)

*1VOR Mode 1020 Hz Morse Code Distortion not calibrated due to instability of measurement.

*2On/Off Duty Cycle: ≤10 W Continuous; >10 to ≤20 W On, max of 3 min, Off, min of 2 min;

>20 to ≤30 W On, max of 1 min, Off, min of 2 min.

*3External Attenuator required for input power >30 W.

T.O. 33K3-4-3457-1

2 EQUIPMENT REQUIREMENTS:

Minimum Use Calibration Sub-

Noun Specifications Equipment Item

2.1 FREQUENCY Range: 10 MHz Arbiter

STANDARD 1083B

Accuracy: <2.5 X 10-7

2.2 UNIVERSAL Range: 29 Hz to 335 MHz Hewlett-Packard

COUNTER 53132A OPT 124

Accuracy: ±0.005% of rdg

2.3 POWER Range: 10.0 to 16.0 dBm Agilent

METER E4418B

Accuracy:

±1.2% of indication

2.4 POWER SENSOR Range: 75 to 335 MHz Agilent

E4412A

Accuracy: (all of Charted

Cal Factor)

±2.4% of charted Cal Factor

2.5 MICROWAVE Range: (Tuned RF Level) Hewlett-Packard

MEASUREMENT 75 to 335 MHz, 8902MS

SYSTEM -127 to +13 dB

Accuracy:

±(0.02 dB + 0.01 dB/10 dB + 1 digit)

0 to -80 dB;

±(0.02 dB + 0.02 dB/10 dB + 1 digit)

-80 to -110 dB;

±(0.02 dB + 0.05 dB/10 dB + 1 digit)

-110 to -127 dB

Range: (AM)

400 MHz,

30 to 90% AM,

1 kHz rate

Accuracy: ±2.5% of indication

Range: (FM)

165 MHz,

1 to 13 kHz deviation,

1 kHz rate

Accuracy: ±2.8% of indication

T.O. 33K3-4-3457-1

Minimum Use Calibration Sub-

Noun Specifications Equipment Item

2.6 SENSOR Range: 75 to 335 MHz, Hewlett-Packard

MODULE 11722A

Accuracy:

(all % of Charted Cal Factor)

75 to 100 MHz, ±3.2%;

100 to 335 MHz, ±2.6%

2.7 SPECTRUM Range: 75 to 1.5 GHz, Hewlett-Packard

ANALYZER 0 to 50 dB 8563E

Accuracy: (Scale Fidelity)

±1.6 dB

2.8 ILS/VOR SIGNAL Range: Rhode-Schwartz

CALIBRATOR CW Frequency: CIVS

75 to 335 MHz;

Audio Frequency:

29 to 9962 Hz

Bearing: 0.00 to 359.99°;

AM: 8 to 100% AM;

FM: ±505 Peak Deviation;

DDM: ±0.415 DDM;

Accuracy:

AM: ±0.5% AM;

Bearing: ≤0.025°;

FM: 6.25 Hz Peak Deviation;

DDM: ±0.001 DDM

2.9 POWER Range: 800 mW to 28 W, Microwave Products

AMPLIFIER 118 to 400 MHz SSPA0240-22/6140

Accuracy: N/A

2.10 COUPLER Range: 118 to 400 MHz Premier Microwave

SET 1852A

Accuracy: ±3% of charted

value *

2.11 POWER Range: 1 to 10 mW Hewlett-Packard

METER 432B-H05

Accuracy: ±1% of rdg *

See footnote at end of Table.

T.O. 33K3-4-3457-1

Minimum Use Calibration Sub-

Noun Specifications Equipment Item

2.12 SIGNAL Range: (CW) Hewlett-Packard

GENERATOR 118 to 400 MHz, 8664A Opt H15

-5 to 0 dBm; (P/O E5504B)

(AM) 30 to 90% modulation,

1 kHz rate;

(FM) 1 to 13 kHz deviation,

1 kHz rate

Accuracy: N/A

2.13 AUDIO Range: 0 to 100% Hewlett-Packard

ANALYZER 8903B

Accuracy: ±1 dB

* A worst case TAR of 2.7:1 is achieved by the RSS value of the Power Meter and the Coupler Set

for the calibration of the Power Meter Measurement.

3 PRELIMINARY OPERATIONS:

3.1 Review and become familiar with the entire procedure before beginning the Calibration Process.

WARNING

Unless otherwise designated, and prior to beginning the Calibration Process,

ensure that all test equipment voltage and/or current outputs are set to zero (0)

or turned off, where applicable. Ensure that all equipment switches are set to

the proper position before making connections or applying power.

3.2 Connect the test equipment to appropriate power source. Set all POWER switches to ON and allow warm-up

as required by the manufacturer.

3.3 Throughout the Calibration Procedure, all hard keys will be in all CAPS, soft keys will be underlined,

submenus will be in Bold, and menu values will be in Italics.

3.4 Connect the TI Power Cord to appropriate power source. Press TI POWER key to on. Allow a 15 min

warm-up period.

3.5 Press the TI SETUP key, as necessary to display the SETUP menu, and press H/W TOOLS, DIAGS, SELF

TEST and RUN to initiate Self Test. When complete, ensure all Self-Tests pass. Press RETURN 3 times.

3.6 Press the TI SETUP key, as necessary to display the SETUP menu, and press STORE/RECALL. Press PREV

or NEXT, as necessary, to select PRESET SETTINGS and then press RECALL. Press RETURN.

3.7 Throughout the Calibration Procedure, when required to enter a value, utilize the ↑, ↓, ←and →keys to enter

the value.

3.8 TO 33K3-4-3457-1 was written for boot sw ver 1.00, main sw ver 1.01, 1.03 and 1.04, fpga ver 1.0 and cpld

ver 1.0. If the TI has another boot sw, main sw, fpga or cpld version, contact the TCM at AFMETCAL.

Otros manuales para IFR 4000

Tabla de contenidos

Otros manuales de Equipo de prueba de Viavi

Viavi

Viavi IFR 6000 Manual de usuario

Viavi

Viavi FBP-HD4i Manual de usuario

Viavi

Viavi OTU-8000 Manual de lista de piezas

Viavi

Viavi 4100 Series Manual de lista de piezas

Viavi

Viavi 3900 Series Manual de usuario

Viavi

Viavi OneAdvisor 1000 Manual de usuario

Viavi

Viavi AVX-10K Manual de usuario

Viavi

Viavi T-BERD MTS 5800 Manual de lista de piezas

Viavi

Viavi 3900 Series Manual de usuario

Viavi

Viavi 7200 Series Manual del propietario

Viavi

Viavi HST-3000 Manual de lista de piezas

Viavi

Viavi SmartClass OLP-85 Series Manual de usuario

Viavi

Viavi SmartClass Fiber OLTS-85 Manual de usuario

Viavi

Viavi T-BERD/MTS-5800 Manual de lista de piezas

Viavi

Viavi SmartOTDR Manual de lista de piezas

Viavi

Viavi OLP-88 Manual de usuario

Viavi

Viavi AVX-10K Manual de usuario

Viavi

Viavi 3550 Manual de usuario

Viavi

Viavi IFR 6000 Manual de usuario

Viavi

Viavi CT-X Manual de usuario

Viavi

Viavi ALT-9000 Manual de usuario

Viavi

Viavi T-BERD/MTS 4000 V2 Manual de usuario

Viavi

Viavi Xgig Maestro Manual de referencia

Viavi

Viavi T-BERD MTS 5800 Manual de lista de piezas

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario