Viavi AVX-10K Manual de usuario

AVX-10K

Flight Line Test Set

Getting Started Guide

AVX-10K Getting Started

Rev. 001

2021-10-12

22135253

VIAVI CONFIDENTIAL

Page 1of 14

General Information

Intended Audience

This guide provides customers the basics of how to setup and use the AVX-10K. Refer to the Operator

Manual for additional details.

Related Information

VIAVI maintains a webpage where additional product information is available to customers:

https://www.viavisolutions.com/avx-10k

Use this manual in conjunction with the following information:

•Operations Manual: provides guidance for approved operation procedures.

•Maintenance Manual: provides guidance for approved maintenance and troubleshooting

procedures.

•Product Brochure: provides ordering information for parts and accessories.

•Configuration Selection Guide: provides information on configuration details.

•Data Sheet: provides technical specifications.

•StrataSync™ User Guide: provides operational information on the StrataSync™ Application

Declaration Of Conformity

VIAVI recommends keeping a copy of the Declaration of Conformity that shipped with the unit with

the device at all times.

Warranty Information

Warranty information for this product is available on the VIAVI website at:

•https://www.viavisolutions.com/en-us/warranty-information

AVX-10K Getting Started

Rev. 001

2021-10-12

22135253

VIAVI CONFIDENTIAL

Page 2of 14

1. Upon Receipt

Perform the following when the device is received from the factory:

Unpack delivered equipment from shipping container.

•New units purchased with a transit case are shipped inside the transit case.

•Returned units returned to the customer from VIAVI will be shipped in

accordance with VIAVI shipping standards; and will be shipped inside the unit’s

transit case, as applicable.

•Store dunnage, packing material, and shipping container for possible future use.

Verify shipment is complete in accordance with packing list and/or from the

below applicable configuration ordered. Report any discrepancies to VIAVI.

Follow the ‘First Time Use’ procedure below.

Check all accessory equipment for damage incurred during shipment. If any

equipment has been damaged, report the damage to VIAVI.

AVX-10K Getting Started

Rev. 001

2021-10-12

22135253

VIAVI CONFIDENTIAL

Page 3of 14

Configuration Details

AVX-10K Getting Started

Rev. 001

2021-10-12

22135253

VIAVI CONFIDENTIAL

Page 4of 14

Figure 1. Representative photo of AVX-10K kit (does not apply to AVX-10K-FLTS)

Safety Information

Refer to the Operation’s Manual for complete safety information.

Caution:

•Only use the AC Adapter/Charger provided with the product to charge the

battery.

•Only connect the AC Adapter/Charger to the correct mains voltage indicated on

the ratings label.

•Do not use or store the battery in temperatures that exceed the manufacturer’s

specifications. Follow manufacturer’s instructions for battery storage and use.

•The battery included with the product is only to be used with the AVX-10K.

•Do not overload input connectors. Refer to product specification or product

labelling for maximum input ratings.

AVX-10K Getting Started

Rev. 001

2021-10-12

22135253

VIAVI CONFIDENTIAL

Page 5of 14

Grounding Power Cord

WARNING: DO NOT USE A THREE-PRONG TO TWO-PRONG ADAPTER PLUG.

DOING SO CREATES A SHOCK HAZARD BETWEEN THE CHASSIS AND ELECTRICAL

GROUND.

For AC operation, the AC Line Cable, connected to the DC Power Supply, is equipped with standard

three-prong plug and must be connected to a properly grounded three-prong receptacle that is easily

accessible. It is the customer's responsibility to:

•Have a qualified electrician check receptacle(s) for proper grounding.

•Replace any standard two-prong receptacle(s) with properly grounded three-prong

receptacle(s).

Product Specifications

Refer to the Product Data Sheet for complete specifications.

AVX-10K Getting Started

Rev. 001

2021-10-12

22135253

VIAVI CONFIDENTIAL

Page 6of 14

2. Product Familiarization

2.1. Controls, Connectors and Indicators

2.2. Indicators

Front Panel LEDs

Charge Status LED

UI Indicators are shown at

the top of the touchscreen.

AVX-10K Getting Started

Rev. 001

2021-10-12

22135253

VIAVI CONFIDENTIAL

Page 7of 14

2.3. Interacting with the AVX-10K

The device has hard keys for control and navigation. The Liquid Crystal Display (LCD) is a capacitive

touch screen that supports gestures such as press to open/select/activate, press and hold, drag and

drop, swipe sideways and pinch to zoom where applicable.

The AVX-10K’s screen layout and screen content changes based on factors such as the selected

function, user settings and modes of operation. Most screens consist of a Header Bar, the Main

Display area, and a Footer area. The Main Display area has Ribbons that can be opened or closed and

when opened, the underlying applications are displayed.

Refer to the Operation Manual for more information.

AVX-10K Getting Started

Rev. 001

2021-10-12

22135253

VIAVI CONFIDENTIAL

Page 8of 14

3. First Time Use

Caution: Please read this section in its entirety before powering on the device.

Turn the Test Set ON

1. Press and release the Power Button.

•An initializing indicator screen is displayed during the boot-up process. Wait while the

device completes the boot-up process.

•Battery LED indicator is illuminated, and the UI loads the Home screen in the display when

the device is ready for use.

•Chime may occur (optional setting).

Run Self-Test

1. Remove the protective film from the touchscreen display before use.

2. Ensure that the Test Set is ON.

3. Verify Test Set Operation

a.On the Home screen, open the Self-Test ribbon.

b.Select the Self-Test application.

c. Press the RUN soft key and follow the prompts as directed. A cable will be

needed for External Loopback test. This cable is supplied with each AVX-10K.

d.When Self-Test has completed running all tests, verify that all portions of the

test have passed. If any portion of Self-Test fails, please contact VIAVI Customer

Service.

AVX-10K Getting Started

Rev. 001

2021-10-12

22135253

VIAVI CONFIDENTIAL

Page 9of 14

Turn the Test Set OFF

1. Press and hold the Power button ~3 seconds.

2. The device performs a series of power-down processes and shuts down.

•Chime (optional setting).

3. Release the Power Button when the Front Panel LEDs begin to flash.

Charging the Device

The AVX-10K is designed to be powered by an internal battery or AC power. It is recommended that

you fully charge the battery prior to first use.

1. To charge the battery, connect the device to an AC power source.

a. Connect the power cord to the AC Adapter/Charger.

b. Connect the DC connector to the device’s DC input connector.

c. Connect the power cord to properly grounded AC power.

2. Verify the device’s Battery LED turns Amber to indicate the battery is charging.

3. The Battery LED turns green when the battery is fully charged.

Otros manuales para AVX-10K

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de prueba de Viavi

Viavi

Viavi T-BERD/MTS-5800 Manual de lista de piezas

Viavi

Viavi Certifier40G Manual de usuario

Viavi

Viavi OTU-8000 Manual de lista de piezas

Viavi

Viavi FBP-HD4i Manual de usuario

Viavi

Viavi OneAdvisor ONA-800 Manual de usuario

Viavi

Viavi 7200 Series Manual de usuario

Viavi

Viavi OneAdvisor ONA-800 Manual de usuario

Viavi

Viavi 8800SX Manual de usuario

Viavi

Viavi T-BERD MTS 5800 Manual de lista de piezas

Viavi

Viavi IFR 6015 Manual de usuario

Viavi

Viavi AVX-10K Manual de usuario

Viavi

Viavi 7200 Series Manual del propietario

Viavi

Viavi OLP-88 Manual de usuario

Viavi

Viavi OneAdvisor 800 400G Module Manual de usuario

Viavi

Viavi T-BERD MTS 5800 Manual de lista de piezas

Viavi

Viavi 4100 Series Manual de lista de piezas

Viavi

Viavi HST-3000 Manual de lista de piezas

Viavi

Viavi SmartOTDR Manual de lista de piezas

Viavi

Viavi SmartOTDR Manual de lista de piezas

Viavi

Viavi SmartOTDR 100 Manual de usuario

Viavi

Viavi T-BERD/MTS 5800 Manual de usuario

Viavi

Viavi T-BERD/MTS 4000 V2 Manual de lista de piezas

Viavi

Viavi IFR 4000 Manual de lista de piezas

Viavi

Viavi NSC-200 Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario