Viaplay Via-Remote C1 Manual de usuario
Model No：RC2-01-131129A
Via-Remote C1/C2
User Guide
Slide both switches inward to unlock the battery storage cover at
the back of the controller. Take out the wireless USB receiver, and
plug it into the USB port of your device (Android TV stick/box, PC, tablet etc.)
After replacing the battery cover, slide both switches outward to lock the
cover in place.
Step 1
Via-Remote C1/C2
+-
A
B
Turn the power switch of the controller to the “I” or “II” position.
The Power light (Red) will turn on, indicating the controller is
active. “I”stands for Mouse/Keyboard Mode, “II” stands for Gaming Mode.
Step 2
Please check the power switch of the controller before removing the
battery. Do not replace or remove the battery when the controller is on.
III
Move the mode switch to “I” to enter “Mouse/Keyboard Mode” and the Mouse
Function will be activated.
Mouse Mode
OFF III
Mouse/Keyboard Mode
Mouse Mode
OFF III
OFF III
Mouse Function
Use two ngers moving inward or outward in a pinching motion on the
surface of the touch panel to zoom in or out. Applicable usages include
web page resizing, picture viewing, or playing games like Angry Birds™.
This feature is supported only on Viaplay certied devices.
MENU VOLUME
DOWN
HOME MUTE VOLUME
UP
POWER
STANDBY
(connected device)
PREVIOUS NEXTPLAY/
PAUSE
SEARCH
Cursor Control and Tap
Use one nger on the touch panel to control the movement of the cursor
on the display screen. Move the cursor to the desired point on the screen
and single tap on the touch panel to execute a left click.
Touch Zone
Mouse Control and Tap
Hot Keys
Gesture Control: Zoom in / Zoom out
Mode Key
Mouse Left
Scroll, Drag, and Stroke are achieved by holding the "Mouse Left" button while
executing nger movements on the touch panel. While the "Mouse Left" button
is held down, the nger movements within the touch panel no longer perform
cursor movements. Instead, specic gestures are performed depending on the
application. For example, scroll control when viewing a web page, moving an
icon to a dierent location, dragging and launching a bird when playing Angry
Birds™ or performing a slash movement when playing the Fruit Ninja™ game.
Under Mouse/keyboard Mode, by pressing the“Mode”key, the“Mode”light and
keyboard backlight will turn on, indicating the touch panel has switched to
Keyboard Typing Function. Please note that under Keyboard Typing Function,
the mouse tapping function and gesture controls become inactive, but control
of the cursor is still available. Under Keyboard Typing Function,“Mouse Left”
button can be used to execute clicks.
Gesture Control: Scroll / Drag / Stroke
Keyboard Function
If you need to input an alternate number or symbol on the keyboard, hold the
corresponding key for around 0.8 seconds, Or hold the“FN”key, then press the
corresponding key at the same time.
It is recommended to switch back to the Mouse Function by pressing the“Mode”
key again for any further execution right after typing.
Button R1
Button Y
Button A
Button B
Button X
START
Gaming Mode
Touch Panel
Dpad-Up
Dpad-Left
Dpad-Down
Button L1
SELECT
Dpad-Right
Mouse Right
Page Down
Page Up
Back
Enter
Mode Key
Touch Panel
Dpad-Up
Dpad-Left
Dpad-Down
Mouse Left
FN Key
Dpad-Right
Move the mode switch to “II” to enter “Gaming Mode”. Under Gaming Mode,
touch panel functions are the same as the Mouse Mode, while all physical keys
are set to perform as HID gamepad keys.
Key Function Diagram
Key Function Diagram
“Tilt Gaming Function”is only available on Via-Remote C2, and supported
only on Viaplay certied devices.
Under Gaming Mode, by pressing“Select” and Button “A” at the same time,the
Mode light will ash, indicating the controller has entered Tilt Gaming
Function. To minimize power consumption, it is strongly recommended to exit
Tilt Gaming Function when not in use by pressing “Select” and Button “A”.
This controller has a built-in sleep mode. It will go to sleep after 3 minutes of
inactivity. Users can wake up the controller by pressing any button. This
preserves battery power and ensures the controller will be ready to use when
needed.
Tilt Gaming Function
Troubles
System Requirements Android 2.3 or above/ Windows/ Mac
Multi-touch Control
2.4Ghz
Active:
Sleeping:
800 mAh Li-ion reachargeable
185g with Li-ion battery
Micro USB cable/User Manual/Battery
Control Method
Wireless Connection
Power Consumption
Battery
Dimensions
Weight
Accessories
Problem Cause Solution
If your remote does not respond
Mouse cursor doesn’t move
smoothly
Zoom in /out function doesn’t work
Battery power is low
The 2.4Ghz signal may be blocked or
interfered by other RF sources
The connected device does not support
standard HID key codes Use the remote with a device supports standard HID key codes
The zoom in / out function is not
supported by your connected device
Make sure there are no obstacles between the USB receiver and the
remote
Try to keep other RF sources away from the USB receiver
Replace the battery
The remote is in STANDBY mode
The remote stops working
The 2.4Ghz signal is lost
Restart the remote
Press any button on the remote to wake it up
One of HOME/SEARCH/ MENU/
STANDBY/ BACK keys doesn’t work
Use the remote together with Viaplay certied devices
Unplug and then plug the 2.4Ghz USB receiver on the connected device
3.7V / 25mA
3.7V/ 300μA
175mm × 89mm ×1 7mm
Troubleshooting
Product Specications
LED Status
Battery is charging
Remote Status
Battery is fully charged
Device is active and has sucient
power
Power insucient
No battery power or the remote is
in sleep mode
The remote is establishing wireless
connection
Charging light (Red) on
Charging light (Red) o
Battery Power light (Red) on
Battery Power light (Red) ash
Battery Power light (Red) o
Wireless Connection light
(Blue) ashing
Wireless Connecting light
(Blue) o
right after ashing
Connection failed
Connection successful
Wireless Connecting light
(Blue) on for 5 second after
ashing then o
Mode Indicator light (Blue) o Mouse mode
Mode Indicator light (Blue) on Keyboard mode
Mode Indicator light (Blue)
ashing (for Via-Remote C2) Tilt Gaming function
Mode light (Blue) ashing
Any Changes or modications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution
LED Description
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Mando a distancia de Viaplay
