VIA Technologies EPIA-PN Manual de usuario
User’s Manual
EPIA-PN
Version 1.0
June 21, 2006
Copyright
Copyright © 2006 VIA Technologies Incorporated. All rights reserved.
No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language, in any form or by any means, electronic, mechanical,
magnetic, optical, chemical, manual or otherwise without the prior written permission of VIA
Technologies, Incorporated.
Trademarks
All trademarks are the property of their respective holders. PS/2 is a registered trademark of
IBM Corporation. Award BIOS is a registered trademark of Phoenix Technologies Ltd.
Macrovision
Apparatus Claims of U.S. Patent Nos. 4,631,603; 4,819,098; 4,907,093; 5,315,448; 6,516,132
licensed for limited viewing uses only. This product incorporates copyright protection
technology that is protected by certain U.S. patents and other intellectual property rights owned
by Macrovision and other rights owners. Use of this copyright protection technology must be
authorized by Macrovision, and is intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision. Reverse engineering or disassembly is
prohibited.
Disclaimer
No license is granted, implied or otherwise, under any patent or patent rights of VIA
Technologies. VIA Technologies makes no warranties, implied or otherwise, in regard to this
document and to the products described in this document. The information provided in this
document is believed to be accurate and reliable as of the publication date of this document.
However, VIA Technologies assumes no responsibility for the use or misuse of the information
in this document and for any patent infringements that may arise from the use of this
document. The information and product specifications within this document are subject to
change at any time, without notice and without obligation to notify any person of such change.
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the interference at his
personal expense.
Notice 1
The changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to comply with
the emission limits.
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
Safety Instructions
1. Always read the safety instructions carefully.
2. Keep this User's Manual for future reference.
3. Keep this equipment away from humidity.
4. Lay this equipment on a reliable flat surface before setting it up.
5. The openings on the enclosure are for air convection hence protects the equipment from
overheating. DO NOT COVER THE OPENINGS.
6. Make sure the voltage of the power source and adjust properly 110/220V before
connecting the equipment to the power inlet.
7. Place the power cord in such a way that people cannot step on it. Do not place anything
over the power cord.
8. Always unplug the power cord before inserting any add-on card or module.
9. All cautions and warnings on the equipment should be noted.
10. Never pour any liquid into the opening. Liquid can cause damage or electrical shock.
11. If any of the following situations arises, get the equipment checked by a service personnel:
• The power cord or plug is damaged
• Liquid has penetrated into the equipment
• The equipment has been exposed to moisture
• The equipment has not work well or you cannot get it work according to User's
Manual.
• The equipment has dropped and damaged
• If the equipment has obvious sign of breakage
12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED,
STORAGE TEMPERATURE ABOVE 60 C (140F), IT MAY DAMAGE THE
EQUIPMENT.
CAUTION: Explosion or serious damage may occur if the battery is
incorrectly replaced. Replace only with the same or equivalent
battery type recommended by the manufacturer.
i
BOX CONTENTS
One VIA Mini-ITX mainboard
One Quick Installation Guide
One ATA-133/100 IDE ribbon cable
One driver and utilities CD
One IO bracket
ii
TABLE OF CONTENTS
Box Contents......................................................................... i
Table of Contents ..................................................................ii
Chapter 1 ............................................................................ 1
Specifications .................................................................... 1
Mainboard Specifications ..................................................... 2
Mainboard Layout............................................................... 4
Back Panel Layout .............................................................. 5
Back Panel Ports ................................................................ 6
Slots ................................................................................ 6
Onboard Connectors ........................................................... 7
Onboard Jumpers ............................................................... 7
Chapter 2 ............................................................................ 8
Installation........................................................................ 8
CPU ................................................................................. 9
Memory Module Installation ................................................11
Connecting the Power Supply ..............................................12
Back Panel Ports ...............................................................13
Connectors.......................................................................16
Jumpers...........................................................................24
Slots ...............................................................................26
Chapter 3 ...........................................................................27
BIOS Setup ......................................................................27
Entering Setup..................................................................28
Control Keys.....................................................................29
Navigating the BIOS Menus ................................................30
Getting Help.....................................................................31
Main Menu .......................................................................32
Standard CMOS Features ....................................................34
IDE Drives .......................................................................35
Advanced BIOS Features ....................................................36
CPU Feature .....................................................................39
Hard Disk Boot Priority.......................................................42
Advanced Chipset Features .................................................43
AGP & P2P Bridge Control...................................................45
iii
CPU & PCI Bus Control .......................................................47
Integrated Peripherals .......................................................48
Super IO Device................................................................51
Power Management Setup ..................................................53
Peripheral Activities...........................................................55
IRQs Activities ..................................................................58
PNP/PCI Configurations......................................................59
IRQ Resources ..................................................................61
PC Health Status ...............................................................62
Frequency / Voltage Control ...............................................63
Load Fail-Safe Defaults ......................................................67
Load Optimized Defaults.....................................................68
Set Supervisor / User Password ...........................................69
Save & Exit Setup .............................................................71
Exit Without Saving ...........................................................72
Chapter 4 ...........................................................................73
Driver Installation .............................................................73
Driver Utilities ..................................................................74
CD Content ......................................................................76
iv
This page is left intentionally blank.
1
CHAPTER 1
Specifications
The ultra-compact and highly integrated VIA EPIA-PN uses the
Mini-ITX mainboard form-factor developed by VIA Technologies,
Inc. as part of the company’s open industry-wide total
connectivity initiative. The mainboard enables the creation of an
exciting new generation of small, ergonomic, innovative and
affordable embedded systems. Through a high level of
integration, the Mini-ITX occupy 66% of the size of FlexATX
mainboard form factor.
Chapter 1
2
MAINBOARD SPECIFICATIONS
CPU
• Support Intel Pentium-M / Celeron-M Processor with Micro-
FCPGA package (socket 479)
Chipset
• VIA VN800 North Bridge
• VIA VT8237R-series South Bridge
Graphics
• Integrated UniChrome™ Pro AGP with MPEG-2 Acceleration
Audio
• VIA VT1618 8-channel AC'97 Codec
Memory
• 1 x DDR2 533/400 DIMM slot (up to 1 GB)
Expansion Slot
• 1 x PCI slot
IDE
• 2 x UltraDMA 133/100 connectors
LAN
• VIA VT6103L 100/10 Base-TX Ethernet PHY
• VIA VT6107 10/100 Mbps Fast Ethernet (default) or VT6122
Gigabit Ethernet Controller
Back Panel I/O Ports
• 3 x Audio Jacks: line-out, line-in and mic-in (Horizontal, Smart
5.1 Support)
• 1 x PS/2 mouse port and 1 x PS/2 keyboard port
• 2 x RJ-45 LAN ports
• 1 x Serial port
• 4 x USB 2.0 ports
• 1 x VGA port
Tabla de contenidos
Otros manuales de Placa madre de VIA Technologies
VIA Technologies
VIA Technologies EPIA-N701 Manual de usuario
VIA Technologies
VIA Technologies VB8001 Manual de usuario
VIA Technologies
VIA Technologies VAB-950 Manual de usuario
VIA Technologies
VIA Technologies VT310-DP Manual de usuario
VIA Technologies
VIA Technologies VAB-1000 Manual de usuario
VIA Technologies
VIA Technologies CM30-SC Manual de usuario
VIA Technologies
VIA Technologies VB7008 Manual de usuario
VIA Technologies
VIA Technologies KT400A Manual de usuario
VIA Technologies
VIA Technologies VB7007 Manual de usuario
VIA Technologies
VIA Technologies KM400 Manual de instrucciones
VIA Technologies
VIA Technologies EPIA-M850 Manual de usuario
VIA Technologies
VIA Technologies EPIA-E900-12Q Manual de usuario
VIA Technologies
VIA Technologies Mini-ITX Manual de usuario
VIA Technologies
VIA Technologies EPIA-PE Manual de usuario
VIA Technologies
VIA Technologies EPIA-TC Manual de usuario
VIA Technologies
VIA Technologies VT82C694X Pro Manual de usuario
VIA Technologies
VIA Technologies EPIA-PE Manual de usuario
VIA Technologies
VIA Technologies EPIA-M920 Manual de usuario
VIA Technologies
VIA Technologies EPIA-SP8000E - VIA Motherboard - Mini ITX Manual de usuario
VIA Technologies
VIA Technologies EPIA-E900 Manual de usuario
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
