VEVOR T35K Manual de usuario
Technical Support and E-Warranty Certificate www.vevor.com/support
CAR REFRIGERATOR
USER MANUAL
MODEL: T35K T45K T55K
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 2 -
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
This product is subject to the provision of european Directive
2012/19/EU. The symbol showing a wheelie bin crossed through
indicates that the product requires separate refuse collection in the
European Union. This applies to the product and all accessories
marked with this symbol. Products marked as such may not be
discarded with normal domestic waste, but must be taken to
acollection point for recycling electrical and electronic devices.
Attentions
Before using the refrigerator, please read this manual carefully and keep it
properly.
1.Before using the refrigerator, clean it inside and outside with a damp cloth.
2.Do not fill the refrigerator with corrosive liquids. Do not directly pour liquids into
the refrigerator.
3.When the refrigerator is not used for a long time, please disconnect the power
supply and keep it dry.
4.Regularly clean the inner chamber to prevent odor and bacteria and ensure
food safety.
5.This manual applies to T35K/T45K /T55K refrigerators (American and European
markets).
Connect the Power Supply
1.Find the DC power cord in the kit. Connect DC plug to the power outlet of the
- 3 -
car refrigerator.
2.Well place the refrigerators in the car (back-up, seats....).
3.Lay out power cords per your car's interior space. Then, insert the cigarette
lighter plug (one side of the power cord) into the car cigarette lighter hole.
4.Press "ON/OFF" for 3 seconds, and the car refrigerator can be turned on.
Adapter Connect the car cigarette lighter Connect the car refrigerator
The product can be connected to more than one power supply.
The onboard refrigerator is directly connected to the DC12V/24V DC power
supply.
The car refrigerator equipped with an AC100-240V AC adapter can be used at
home with a voltage of AC100-240V.
Instructions
Car battery protection voltage reference:
Built-in ECO electronic control module can automatically monitor the vehicle
battery voltage. Before the power consumption affects the standard ignition of the
vehicle, the onboard refrigerator will automatically disconnect the power supply to
ensure that the vehicle battery power will not be too low to affect the standard
ignition of the vehicle.
Battery Voltage
Factory default voltage protection value H
H (high) level
M (medium) level
L (low) level
DC12V
DC11.3V OFF
DC12.5V ON
DC10.1V OFF
DC11.4V ON
DC9.6V OFF
DC10.9V ON
- 4 -
DC24V
DC24.6V OFF
DC26.0V ON
DC22.3V OFF
DC23.7V ON
DC21.3V OFF
DC22.7V ON
Note: When the power supply is connected and the refrigerator is turned on,
disconnecting or starting refers to disconnecting or starting the compressor.
Component Diagram
1. Cabinet 2. Classified plate
3. Case Cover 4. Door buckle
5. Sealing Strip 6. Control panel
7. Handle ( optional ) 8. Wheel ( optional )
9. Power Interface
- 5 -
①Setting for large compartment ②
large compartment
③
Setting button
④
Small compartment
⑤
Setting for small compartment
⑥Cooling
indicator ⑦ON/OFF button ⑧Max/Eco
△Function Introduction
After power-on, the digital display screen will be fully lit for 1 second and
displayed normally. The default is the last memory function. The display screen
temperature figure will be permanently lit in the middle in standby mode.
1. Open and Close
After the power is turned on, the refrigerator will be in standby mode.
Now, press the ON/OFF button to open the refrigerator. After the refrigerator is
opened, the display will show the current temperature of the storage room. It will
start running.
Warning: The displayed temperature is only the temperature around the sensor.
The temperature of different points in the storage room is different.
Therefore, this is normal if the displayed temperature differs from the measured
temperature.
Press the ON/OFF button when the refrigerator is running, and the refrigerator will
return to standby.
2. Temperature Setting
1) Switch on the fridge, press to raise the set temperature and to reduce the
storage compartment's temperature. Each press will change by 1 ℃, and the maximum
can be set to 10 ℃, and the minimum can be set to - 20 ℃. Please note the clapboard shall
be located in the correct position before the set temperature of the large compartment.
- 6 -
2) If the clapboard is removed from the compartment, the temperature display of the small
compartment will be off. In this condition, there is only one storage compartment.
3) The temperature display will flash for 3 seconds and then fix the setting after adjusting
the temperature and no more action on buttons. The setting temperature will be memorized,
and the display will turn back to show the actual temperature of the storage compartment.
4) The default value for an initial startup is 0 ℃/32 ℉.
3.MAX / ECO Mode Conversion
Directly press key to switch to MAX mode or ECO mode.
MAX running mode: the fridge will work hard to reduce temperature fast.
ECO running model: the fridge will work longer to reduce the temperature to save energy.
4.Celsius (° C)/Fahrenheit (° F) display switching
Press and hold the "+" key and the setting key on the left (large box) for over 3 seconds to
switch.
5.Battery Protection Levels: H1 (High) N2 (Low) L3 (Medium)
Press key for 3s to enter the battery protection setting. Press the key again to
switch H1 N2 L3 levels in turns.
If no operations were detected, the set level will flash for 3s, then exit and save the
current setting.
Model Parameter Table:
Model
No.
Capa
city
Voltage
AC
Power
DC
Power
Temper
ature
Adjust
able
Plug
type
T35K
35L
AC100~24
0V
(
50/60Hz
)
DC12V/24V
Cooling
: 60W
Coolin
g
60W
50~-
4℉
USA
plug
DC
plug
- 7 -
T35K
35L
AC100~24
0V
(
50/60Hz
)
D
C 12V/24V
Cooling
: 60W
Coolin
g
60W
10~-
20
℃
EU
plug
DC
plug
T45K
45L
AC
100~240V
(
50/60Hz
)
D
C 12V/24V
Cooling
: 60W
Coolin
g:
60W
50~-
4℉
USA
plug
DC
plug
T45K
45L
AC
100~240V
(
50/60Hz
)
D
C 12V/24V
Cooling
: 60W
Coolin
g:
60W
10~-
20
℃
EU
plug
DC
plug
T55K
55L
AC
100~240V
(
50/60Hz
)
D
C 12V/24V
Cooling
: 60W
Coolin
g:
60W
50~-
4℉
USA
plug
DC
plug
T55K
55L
AC
100~240V
(
50/60Hz
)
D
C 12V/24V
Cooling
: 60W
Coolin
g:
60W
10~-
20
℃
EU
plug
DC
plug
Notice for Temperature Setting
Insert the clapboard in the correct position of the storage compartment, and then
switch on the fridge. The display will show the temperature of two storage
compartments. When adjusting temperature, setting the temperature of the small
compartment(TS) is not able to be higher than setting the temperature of the big
compartment (TL).
TS ≤TL
For example, if the set temperature of the small compartment (TS ) to -10℃(14
℉), the range of setting temperature of the large compartment (TL) is from -10℃
(14℉) to 10℃(50℉). Tips: use a large compartment for fresh food and a small
compartment for frozen food.
- 8 -
Power-off Memory Function
There is a power-off memory function for car refrigerators. When the power is lost,
the working state (On/Off status, working mode, etc.) before power-off can be
automatically recovered at the next startup; no need to set it again.
ECO: Energy-saving coolingMAX: Powerful cooling
Use Clapboard
1.Align with two rails on inner liner.
2.Vertically push clapboard to bottom of liner.
- 9 -
Simple Fault Analysis
Advice: If abnormal situations cannot be resolved through a simple fault analysis,
please get in touch with professional customer service for assistance.
I. Car Refrigerator Does Not Work
1.Check if the power is connected correctly. (check If the plug is loosened or
positive and negative poles are reversed).
2.Check if the power switch on the operation panel is turned on.
3.Check if the cooling ventilation is normal.
4.Check if the fuse is blown.
II. Poor Cooling Performance
1. Check if the lid is closed correctly.
2. Check if the door seal is damaged or deformed.
3. Check if there is poor ventilation around the fridges.
4. Check if the temperature is set correctly.
△Definition Of Error Codes On The Display
Error Code
Error Type
E1
Low Input Voltage
E2
Fan Fault
E3
Compressor start failed
E4
Low Rotational Speed of Compressor
E5
Controller module temperature too high
E6
Open or Short Circuit of NTC
III. Abnormal Noise
1.The car refrigerator needs to be placed smoothly.
2.Touch a wall or other object.
3.There are parts loose or falling off inside.
IV. Condensation on Refrigerator Surface
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Refrigerador de VEVOR
