VEVOR DR24 Manual de usuario

Technical Support and E-Warranty Certificate

www.vevor.com/support

FIBER CEMENT BACKERBOARD SHEAR

USER MANUAL

We continue to be committed to offering tools at competitive prices. "Save Half", "Half Price",

or any other similar expressions used by us only represent an estimate of savings you might

benefit from buying certain tools with us compared to the major top brands and do not

necessarily mean to cover all categories of tools offered by us. You are kindly reminded to

verify carefully when placing an order with us if you are saving half in comparison with the top

major brands.

DR24

Have product questions? Need technical support? Please feel free to

CustomerService@vevor.com

NEED HELP? CONTACT US!

This is the original instruction, please read all manual instructions carefully

before operating. VEVOR reserves a clear interpretation of our user manual. The

appearance of the product shall be subject to the product you received. Please

forgive us that we won't inform you again if there are any technology or software

updates on our product.

FIBER CEMENT

BACKERBOARD SHEAR

The symbols used in this manual are intended to alert you of the possible

risks. Please fully read the safety signs and instructions below. The warning

themselves do not prevent the risks and can not be a substitute for proper

methods of avoiding accidents.

This symbol, placed before a safety comment, indicates a kind

of precaution,waning, or danger. lgnoring this warning may lead

to an accident. To reduce the risk of injury, fire, or electrocution,

please always follow the recommendationsshown below.

Warning- To reduce the risk of injury, users must read the instruction

manual carefully.

Please refer to the appropriate section in this user manual before any

operation.

Warning- Be sure to wear eye protectors when using this product.

Warning- Be sure to wear dust masks when using this product.

Warning- Be sure to wear ear protectors when using this product.

PRODUCT SPECIFICATIONS

FIBER CEMENT BACKERBOARD SHEAR

Model

DR24

Blade Material

ADC12

Shank Size

1/4”Hex

Materials to cut

Fiber Cement Board Plasterboard

Cutting capacity

13mm Fiber Cement Board,12mm Plasterboard

FIBER CEMENT BACKERBOARD SHEAR

WARNING:

READ AND UNDERSTAND THESE INSTRUCTIONS and the instructions

for the power tool used with this product.

FAILURE TO FOLLOW all instructions listed may result in electric shock,

fire and/or serious personal injury.

CUTHAZARD-Never have any part of your body near the blades or

moving parts of the power tool. Serious personal injury may occur.

Before use, ensure the shear attachment is properly attached to the tool.

·Turn the tool OFF and/or disconnect the battery pack before installing

and removing accessories, before adjusting or when making repairs.

·To prevent accidental operation, lock the trigger switch in the OFF

position when the tool is not in use or when storing the tool.

·DO NOT sharpen blades.

DO NOT use the shear with any kind of accessory or attachment.

·Wear gloves when handling sheet metal. The edges are sharp and can

cause serious personal injury. For best results, always clamp or anchor

the material to be cut.

DO NOT use under wet conditions or in the presence of flammable liquids

or gases.

DO NOT let children come into contact with the shear. Supervision is

required when inexperienced operators use this tool.

DO NOT hold the shear attachment as a primary gripping surface.

·Make sure the power tool is set to the“forward”(clockwise)direction

before use.

·Hold the power tool on insulated gripping surfaces (if a drill use both

hands). The shear contacting a live wire may make exposed metal parts of

the shear and the power tool“live”and could give the operator an electric

shock.

·AVOID body contact with earthed or grounded surfaces, such as pipes

and appliances. There is an increased risk of electric shock if your body is

earthed or grounded.

·DO NOT use solvents or other harsh chemicals to clean the shear's

non-metallic parts. These chemicals may weaken the plastic materials

used in these parts. Use the cloth dampened only with water and mild

soap.

·DO NOT let any liquid get inside the shear or immerse any part of the

shear into a liquid.

·DO clean your shear attachment frequently to avoid damage or jams

caused by too much dust or fragment.

INSTALLING&OPERATING

1.Insert the shank end of the shears into the nose of the impact driver, or

chuck, if using a drill. Tighten chuck securely.

2.Pivot telescoping clamp toward the back of tool and adjust the

clamp(both width and length) to fit securely on the tool.

a.Adjust the width by turning the nut(1)located on the left side of the

clamp.Rotate the nut clockwise/ counter-clockwise to reduce/increase the

width.

b. Rotate the knobs(3)on both sides to loosen the clamp. Then adjust the length

of the clamp by pulling or pushing on the length adjusting lever (4) of the

telescoping clamp.

c. Lock at the desired length/width by pushing the lock(2)located at the end of

the telescoping clamp.

3.Ensure the shear is secure on the tool.

HOW TO OPERATE YOUR SHEAR

1.For an attractive hand-cut appearance,hold tile piece finished-side-up when using the

drill attachment to make straight,angled or curved cuts in natural roofing slate.

2.Start angled cuts at the narrow end to avoid chipping off the point.

3.Make sure that the shear's padded skid plate is flush to the tile and that the shear

attachment is operating at a drill speed 0f 1400 to 2000RPM.

4.The ideal thickness of fiber cement board to be cut is around 4-8mm.

5.The assembly of the telescoping clamp and shear attachment is shown as below. It

fits 1/4-1/2 in.(6.35-12.7 mm)drills including 1/4 in.(6.35 mm)Quick Release Chucks.

6.360°Rotating Head secures in any position for optimum tool clearance and

material flow.

HOW TO MAINTAIN YOUR SHEAR

Step 1: Disassemble the gear box

Step2. Clean the inside of gearbox

witsmall Brush

Step3. Add some grease.(NLGI2-3level

grease is recommended)

Step4. Re-assembly

EXPLODED VIEW

PARTS LIST

WARNING!

When servicing, use only original equipment replacement parts. The use of any

other parts may create a safety hazard or cause damage to the tool. Any

attempt to repair or replace electrical parts on this tool may create a safety hazard

unless repairs are performed by a qualified technician.

Key#

PartName

Qty

Inner hexagon head screw

Gearbox cover

Hexagon head bolts

Length adjusting lever

Knob

Hexagon wrench fixings leeve

Connecting link

Rubber plug

Locking bracket

Parallel pins

Width adjusting bracket

Locking buckle

GearBox

Check Ring

Ball bearning

Hexagon head bolts

Output shaft

Trolley

Hose clamps

Movable blade

Washer

Fixed blade

Plastic sliding strip

cross recessed countersunk head screws

Washer

GEARBOX

Prevailing torque type hexagon nut

Washer

NUT

HEXKEY

SPANNER

Tabla de contenidos

Otros manuales de Herramientas eléctricas de VEVOR

VEVOR

VEVOR Thicknesser M1B-LS-3301 Manual de usuario

VEVOR

VEVOR 038-MDA Manual de usuario

VEVOR

VEVOR M1Q-DU03-110 Manual de usuario

VEVOR

VEVOR HS-5 Manual de usuario

VEVOR

VEVOR TLM38385 Manual de usuario

VEVOR

VEVOR M1B-LS-3305 Manual de usuario

VEVOR

VEVOR P8001 Manual de usuario

VEVOR

VEVOR JY-150 Manual de usuario

VEVOR

VEVOR ALK-T2 Manual de usuario

VEVOR

VEVOR 18150FTLB Manual de usuario

VEVOR

VEVOR DSM1-100008B Manual de usuario

VEVOR

VEVOR YM-35 Manual de usuario

VEVOR

VEVOR DT-S005 Manual de usuario

VEVOR

VEVOR G8504C Manual de usuario

VEVOR

VEVOR KD-8801 Manual de usuario

VEVOR

VEVOR PM80KB Manual de usuario

VEVOR

VEVOR DP1006L Manual de usuario

VEVOR

VEVOR TLM38388 Manual de usuario

VEVOR

VEVOR JX1.3-30 Manual de usuario

VEVOR

VEVOR ALK-T1 Manual de usuario

VEVOR

VEVOR P8001 Manual de usuario

VEVOR

VEVOR XC6527 Manual de usuario

VEVOR

VEVOR 2822C Instrucciones de operación

VEVOR

VEVOR Q1D-KZ5-80 Manual de usuario

Manuales populares de Herramientas eléctricas de otras marcas

AEG

AEG OMNI-JS Manual de usuario

SIP

SIP 01533 Manual de usuario

Ribimex

Ribimex PRS499 Manual de usuario

3M Fiber Optic Connector Crimp Tool Manual de usuario

Ryobi

Ryobi P524 Manual de usuario

ROJEK

ROJEK FSN 300A Manual de usuario

Kemper

Kemper 1740PRO Manual de usuario

WABCO

WABCO OptiTire Manual de usuario

EINHELL

EINHELL TE-MS 18/210 Li Manual de usuario

Orgapack

Orgapack OR-T 85 Guía rápida

TOUGHCUT

TOUGHCUT Diamond 400 Manual de usuario

Yaros

Yaros PB-3603 Manual de usuario

Fein

Fein BSS 2.0 E Guía de configuración

Baileigh Industrial

Baileigh Industrial SS-2725 Manual de usuario

Milwaukee

Milwaukee 2674-20 Manual de usuario

Fein

Fein BLs 1.6 Manual de usuario

Princess

Princess Electric Multi Sharpener Manual de usuario

FOREDOM

FOREDOM K.1050 Manual