VEVOR LI5-01 Manual de usuario

Technical Support and E-Warranty Certificate www.vevor.com/support
Induction Hob User Manual
MODEL:LI5-01
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

2
MODEL:LI5-01
Have product questions? Need technical support? Please feel free to
contact us:
CustomerService@vevor.com
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
Induction Hob

3
Warning-To reduce the risk of injury, user must read
instructions manual carefully.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:(1)This
device may not cause harmful interference, and (2)this device
must accept any interference received, including interference
that may cause undesired operation.
This product is subject to the provision of European Directive
2012/19/EC. The symbol showing a wheelie bin crossed
through indicates that the product requires separate refuse
collection in the European Union. This applies to the product
and all accessories marked with this symbol. Products marked
as such may not be discarded with normal domestic waste,
but must be taken to a collection point for recycling electrical
and electronic devices

4
CONTENTS
BEFORE USE ....................................................................................................... 5
SAFETY INSTRUCTIONS .................................................................................. 6
INSTALLATION.....................................................................................................8
ELECTRICAL CONNECTION ............................................................................ 8
TEMPERATURE LEVEL TABLE ..................................................................... 12
TECHNICAL INFORMATION........................................................................... 14
CLEANING ...........................................................................................................14
TROUBLESHOOTING GUIDE ......................................................................... 14
NOISES MADE BY THE HOB..........................................................................15
AFTER-SALES SERVICE ................................................................................. 16
Before contacting the After-sales Service: ..................................................... 16

5
BEFORE USE
IMPORTANT: The cooking zones will not switch on if pots are not the right
size. Only use pots bearing the symbol “INDUCTION SYSTEM” (Figure
below) or enameled pots. Place the pot on the required cooking zone
before switching the hob on.
EXISTING POTS AND PANS
Use a magnet to check if the pot is suitable for the induction hob: pots and
pans are unsuitable if not magnetically detectable.
Make sure pots have a smooth bottom, otherwise they could scratch
the hob. Check dishes.
Never place hot pots or pans on the surface of the hob’s control panel.
This could result in damage.
The bottom diameter of pots or pans should be at least 10cm.

6
SAFETY INSTRUCTIONS
YOUR SAFETY AND THAT OF OTHERS ARE VERY
IMPORTANT
This manual and the appliance itself provide important safety messages,
to be read and always observed.
This is the warning / caution-safety symbol, regarding safety,
warning of potential risks to users and other
All messages relevant to safety specify the potential risk to which they refer
and indicate how to reduce the risk of injury, damage and electric shocks
due to incorrect use of the appliance. Make sure to comply with the
following:
The appliance must be disconnected from the power supply before
carrying out any installation operation.
Installation and maintenance must be carried out by a specialized
technician, in compliance with the manufacturer’s instructions and the
local safety regulations in force. Do not repair or replace any part of
the appliance unless specifically stated in the user manual.
The appliance must be earthed.
The power cable must be long enough to connect the appliance, fitted
in the cabinet, to the power supply.
For installation to comply with the current safety regulations, an
omnipolar switch with a minimum contact gap of 3mm is required.
Do not use multi-sockets or extension cords.
Do not pull the appliance’s power cable.
The electrical parts must not be accessible to the user after
installation.
The appliance is designed solely for domestic use for cooking food. No
other use is permitted (e.g. heating rooms). The Manufacturer declines
any liability for inappropriate use or incorrect setting of the controls.
WARNING: The appliance and its accessible parts become hot during
use. Care should be taken to avoid touching heating elements.
Children less than 8 years old shall be kept away unless continuously
supervised.
The accessible parts can become very hot during use. Children must
be kept away from the appliance and watched over to ensure they do
not play with it.

7
Do not touch the appliance heating elements during and after use. Do
not allow the appliance to come into contact with cloths or other
flammable materials until all the components have cooled sufficiently.
Do not place flammable materials on or near the appliance.
Overheated oils and fats catch fire easily. Pay attention when cooking
food products rich in fat and oil.
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
hazards involved. Children shall not play with the appliance.Children shall
not make cleaning and user maintenance without supervision.
An air switch or circuit breaker (not supplied) should be installed in the
compartment under the appliance.
If the surface is cracked, switch off the appliance to avoid the
possibility of electric shock.
The appliance is not intended to be operated by means of an external
timer or separate remote control system.
WARNING: Unattended cooking on a hob with fat or oil can be
dangerous and may result in fire. NEVER try to extinguish a fire with
water, but switch off the appliance and then cover flame e.g. with a lid
or a fire blanket.
WARNING: Danger of fire: do not store items on the cooking surfaces.
Do not use steam cleaners.
Metallic objects such as knives, forks, spoons and lids should not be
placed on the hob surface since they can get hot.
After use, switch off the hob element by its control and do not rely on
the pan detector.
CAUTION! Surface remains hot after use! Do not touch the
top plate right after removing the pot or the pan, as the top plate will
still be very hot.

8
INSTALLATION
After unpacking the product, check for any damage during transport. In
case of problems, contact the dealer or the After-Sales Service.
For built-in dimensions and installation instruction, see in below figures
The distance between the underside of the appliance and the
separator panel must respect the dimensions given in the
figure (mini. 50mm).
In order to ensure the correct operation of the product, do not obstruct
the minimum required clearance (min. 20 mm) on the worktop for
air flow out.
If an undertop oven is installed, make sure the oven is equipped with a
cooling system.
Do not install the hob above a dishwasher or washing-machine, so that
the electronic circuits do not come into contact with steam or moisture
which could damage them.
ELECTRICAL CONNECTION
Disconnect the appliance from the power supply.

9
Installation must be carried out by qualified personnel
who know the current safety and installation regulations.
The manufacturer declines all liability for injury to persons or animals
and for damage to property resulting from failure to observe the
regulations provided in this chapter.
The power cable must be long enough to remove the hob from the
worktop.
Make sure the voltage specified on the rating label located on the
bottom of the appliance is the same as that of the home.
INSTRUCTION FOR USE
To avoid permanently damaging the glass-ceramic top, do not
use:
Pots with bottoms that are not perfectly flat.
Metal pots with an enameled bottom.
CONTROL PANEL LAYOUT
Switching the hob On/Off
To switch the hob on, press the button and the cooking
zone displays light up. To switch off, press the same button
until the displays switch off. All the cooking zones are

10
deactivated
If the hob has been in use, the residual heat indicator “H” remains lit until
the cooking zones have cooled down.
If no heating zone is selected within 120 seconds of switching on, the hob
switches off automatically.
Switching on and adjusting cooking zones
Once the hob is switched on and the pan is positioned on the
chosen cooking zone, select the zone using the corresponding
button: the display shows level 0.Each cooking zone has various
power levels, adjustable with the
buttons , going from “1”: min.
level, to “9”: max. level.
Deactivation of cooking zones
Select the cooking zone you wish to switch off. Press the corresponding
button.
Press the key “ ” to set the level to “0”. The cooking zone switches off
and the residual heat indicator “H” lights up.
Child lock
This function locks the controls to prevent accidental switching on of
the hob. To activate the child lock function, switch on the hob and hold
button for three seconds; the timer shows Lo. Then the control panel
is locked.
To deactivate the control panel lock, repeat the activation procedure. The
Lo goes off and the hob is active again.
Tabla de contenidos
Otros manuales de Quemador de VEVOR























