VEVOR WP9600A Manual de usuario
PIPE INSPECTION SYSTEM
User Manual
This is the original instruction, please read all manual instructions carefully before operating.
VEVOR resees clear interpretation of our user manual. The appearance of the product shall
be subject to the product you received. Please forgive us that we won't inform you again if
there is any technology or software updates on our product.
Applicable model：WP9600A / 9600A
PIPE INSPECTION
SYSTEM
User Manual
01
ATTENTIONS
DESCRIPTION
PRODUCT SPECIFICATION
02
Item:
Charger:
Batte:
Continuous use time for batte:
Investigation depth:
Material:
Camera light source:
Camera material:
Menu languages
Camera picture:
Parameter
AC100-240V DC12.6V 1000MA
Lithium batte 12V4500MA
Approximate 6h
50m, 70m, 91.5m, 120m (selectable line length)
Fiber tube with high intensity
With high white light
Stainless steel
Multi-language
Coloul
1. Please read the manual carefully before using it.
2. Handle it carefully during operation, avoid throwing down or pressing it heavily.
3. please keep distance from the system when charging.
4. After being used, turn o the display and pull out all the connection joints.
1. Coloul TFT LCD Screen.
2. High resolution camera and clear picture.
3. Night vision.
4. High-quality special cable, waterproof and anti-corrosion/cold/tensile.
5. 12V 4500MA lithium batte.
6. With sun-visor for a bright environment outside.
7. Range of Application：Water-supply pipe, Air-conditioner pipe, Cable pipe, Pipeline vacuum system,
PLUNBIN pipe, Buildings, Sunken pipe.
8. Operating Temp: -10°C to 60°C
Item:
Camera diameter:
With the tube diameter:
Camera light source:
Cameraworkingvoltage:
Lights’ working voltage:
Waterproof:
Camera material:
Camera size:
Camera protective cover pas material:
Camera protective cover pas size 1:
Camera protective cover pas size 2:
Parameter
23 mm
>25mm
12 LED with high white light(adjustable)
5V
12V
IP68
stainless steel
143 mm* 23 mm
plastic-steel
29mm* 40mm
40mm* 90mm
1. Metal Contact Chip 2. Spring
3. Highlight White Led 4. Camera Lens
03
1. Camera
INSTRUCTION FOR PRODUCT
Product Specication
04
Cable Length Scale
the scaled cable can show the cable length
Fixed Buckle
xed the cable wheel
2. Coil
SPECIAL DETECTION CABLE FIXER
Useful Tool
05
Picture 1
1. Vital: turn o the power switch, connect the video camera and the monitor, or the video camera and
the monitor may be damaged.
2. Connect the camera to 3-coil plug, 2-cell box and the 1-monitor. (Pic.1)
3. Turn on the power switch in the power box, the indicator light of the monitor is on, the switchboard
stas.
4. Install the video camera with the protective cover slightly and put it into the pipe, rotate the coil to a
proper depth.
5. Adjust LED light degree adjuster to proper light degree.
For videotape, refer to the DVR operation details (display operation:Recording Type )
6. Switch video to another large screen through video line.
7. After utilization, mover the camera from the pipe carefully, take a clean, soft and d cloth to clear up
it and put it back.
System Installation
1. Monitor Video
2. Power of Monitor
3. Adjacent Coil Plug
4. AV Output
5. Batte Indicator
6. Power Input for Charger
7. Light-Degree Adjustment for White Light LED
8. Power Switch
9. Power Light
3. Cell Box
TROUBLE SHOOTING
06
When the batte power is low, it needs charging, and the method is as below:
1. Take out the batte and charger from the box.
2. Connect the charger to the batte.
3. Connect the charger to the alternating current of 100-240V. The red indicator means charging.
4. The green indicator means nishing charging.
Notes: To make sure the batte using age longer, please recharge it timely; otherwise, it will make it
can not recharged.
Charging
Problem
Show blue screen
Problems with
LED lights
1. Read the manual and check the correct way to turn on the light.
2. Check whether there is water in the front of the camera, which causes the
LED to not light up.
Not running
1. Check whether the batte power is sucient.
2. Check whether the display screen is damaged.
3. Check that the display screen is connected to the power supply normally.
Photo/video
cannot be saved
1. Check whether the memo card is damaged and replace it.
2. Check if there is any foreign matter or deformation in the memo card slot.
Cannot format Memo card is damaged. Replace the memo card.
Unable to charge
1. Check the charging po for foreign matters or deformation.
2. Check whether the charger is damaged.
3. When the batte is too low, it should be charged in time to prevent the
batte from being unable to charge due to loss.
Solution
1. Check whether the camera inteace is loose, and the camera is loose,
causing poor contact.
2. Check whether the connection of cable and power supply is normal or loose.
3. Check whether the monitor is connected to the power supply normally.
4. Check whether the cable is broken.
5. Check whether there is water in the front of the camera or the camera is
damaged.
6. When using the camera, please put on the protective cover rst, so as not
to cause the camera to collide with hard objects and damage, unable to
display images.
07
Broken cable
Cable knotting
1. When retracting and releasing cables, it shall be noted that the cables shall
not be crossed and knotted, and the bending radian of cables shall not be
less than 90 degrees.
2. When retracting the cable, pay attention to cooperate with the rotating iron
frame to orderly recycle, and do not use it violently.
Equipment
cleaning
When cleaning the equipment, turn o the power before cleaning to avoid
damage to the equipment.
Warning If the fault cannot be solved, please do not disassemble it by yourself.
Please contact the after-sales seice personnel.
1. It is recommended to use the cable on the pipe with a diameter ≥ 60cm.
Pay attention to the force of pushing the cable to avoid breaking the
detection line.
2. This product is only used for pipeline detection and inspection and cannot
be used for other purposes.
OPERATING INSTRUCTIONS FOR HD DVR
REC/-: To sta/stop recording
Play/+: To switch between recording and photographing. (Please refer to the icon in the top left corner)
MENU: To access and loop the settings main menu / long press to rotate the screen 0, 90, 180 or 270
degrees
>: To zoom out
<: To zoom in the image 0-36X
POWER: To power on/o the display screen
1. Press MENU button the setup menu: PICTURE; OPTION; TIME; PHOTO; VIDEO
2. Press </> button to option sub-menu
3. Press REC button to adjust the setting”s value OR press REC button enter/conrm
4. Press PLAY button to exit
1. Main Menu Settings
1. Press PLAY button to switch between Recording and photographing. (please refer to the icon in the
top left corner)
2. Press REC button to sta recording/photographing,then press REC button again to stop recording.
2. Recording and Photographing
08
1. Loop press MENU button to nd PHOTO.
2. Press </> button to nd Playback.
3. Press REC button to enter,then press </> to choose one and press REC button to playback.
4. Press PLAY button to exit.
3. Photo playback on monitor
This device complies with Pa 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful inteerence, and (2) this device must accept any
inteerence received, including inteerence that may cause undesired operation.
1. Loop press MENU button to nd RECORD.
2. Press </> button to nd Playback.
3. Press REC button to enter, then press </> to choose one and press REC button to enter.
4. Press REC button to playback.
5. Press PLAY button to exit.
4. Video playback on monitor
FCC INFORMATION
This product is subject to the provision of European Directive 2012/19/EC. The symbol
showing a wheelie bin crossed through indicates that the product requires separate
refuse collection in the European Union. This applies to the product and all accessories
marked with this symbol. Products marked as such may not be discarded with normal
domestic waste, but must be taken to a collection point for recycling electrical and
electronic devices.
*There are any minor changes to the numbers included in the user manual without prior notice.
EU ENVIRONMENTAL PROTECTION
EU Impoer: WAITCHX
Address: 250 bis boulevard Saint-Germain 75007 Paris
UK Impoer: FREE MOOD LTD
Address: 2 Holywell Lane, London, England, EC2A 3ET
Manufacturer: Shenzhen Woshijie Electronic Technology Co., LTD
Add: 5Floor, B2B 501 Building Yingzhan Indust Park, Longtian Community,
Pingshan District, Shenzhen, China
Eurep Uk Ltd
Unit 2264, 100 Ock Street, Abingdon
Oxfordshire England Ox14 5dh
UK REP
EUREP GmbH
Unterlettenweg 1a,
85051 Ingolstadt, Germany
EC
REP
Tabla de contenidos
Idiomas:
Otros manuales de Instrumento analítico de VEVOR
Manuales populares de Instrumento analítico de otras marcas
EXTOL PREMIUM
EXTOL PREMIUM 8820043 Instrucciones de instalación y funcionamiento
RIDGID
RIDGID SeeSnake Compact Manual de usuario
Teledyne
Teledyne 3000PA Manual de usuario
YDLIDAR
YDLIDAR TIA Manual de usuario
Olympus
Olympus IPLEX FX Series Manual de usuario
Bosch
Bosch GLM 50 C Professional Manual de usuario
