Vertex R22.3 Instrucciones de operación
R22.3 RECUMBENT ASSEMBLE
INSTRUCTION
2015/3/9V1.1+V1.1
1
INDEX
1. PART LIST....................................................................................................................2
2. SCREW BAG................................................................................................................3
3. ASSEMBLE STEPS......................................................................................................4
4. The operation instruction of electronic meter..............................................................11
4.1. Electronic meter structure................................................................................12
5. Display page introduction ...........................................................................................15
5.1. Simple user interface：....................................................................................15
5.2. Startup page.....................................................................................................15
5.3. Resident area...................................................................................................15
5.4. Standby page...................................................................................................16
5.5. Program control set page.................................................................................16
5.6. Exercise storage device optional page (running and fitness with the exercise
record device).............................................................................................................17
5.7. Pages of the exercise ......................................................................................19
5.8. Exercise Course Page .....................................................................................25
6. Heart Detection Introduction.......................................................................................26
6.1. Heart Rate Sensor System ..............................................................................26
6.2. Regional heart rate exercise............................................................................27
7. Sports and fitness program.........................................................................................28
7.1. Overview of sports and fitness program...........................................................28
7.2. Overview of sports and fitness program...........................................................28
8. Program Set ...............................................................................................................36
8.1. Enter and Exit Engineer Mode.........................................................................36
8.2. Setting Metric or Imperial system Units............................................................36
8.3. Time zone setting.............................................................................................37
8.4. Language.........................................................................................................37
8.5. Setting Metric or Imperial system Units............................................................37
8.6. Machine information.........................................................................................37
8.7. Wi-fi setting......................................................................................................38
8.8. Power setting...................................................................................................38
8.9. Update for the software....................................................................................38
8.10. Value Setting................................................................................................39
8.11. Debug Log....................................................................................................39
8.12. TV Setting.....................................................................................................39
8.13. Others...........................................................................................................40
2015/3/9V1.1+V1.1
2
1. PART LIST
ITME
Description
Qty
ITEM
Description
Qty
A
frame
1
H
Computer decorative cover front
1
B
Control tube
1
I
Stuff holder
1
C
Computer
1
J
Flask holder
1
D
Seat
1
K
Lower seat cover
1
E
Handrail tube
1
L
Screw head cover
2
F
Control tube decorative cover
1
M
Screw bag
1
G
Lower computer decorative cover
1
N
Power wire
1
2015/3/9V1.1+V1.1
3
2. SCREW BAG
ITME
Description
Qty
ITEM
Description
Qty
K01
Cks hex screw M8xP1.25x25
4
K12
Cks hex screw M8xP1.25x25 stainless
steel
4
K02
Spring washer M8
4
K13
Spring washer M8 stainless steel
4
K03
Washer Φ8xΦ20x2.0t
4
K14
Washer Φ8xΦ16x1.5t stainless steel
4
K04
Truss cross screw M5xP0.8x12
2
K15
Round head cross screw NO.10-32
UNFX20mm stainless steel(with inner
toothed washer)
4
K05
Truss cross self-tapping screw Φ4x12
1
K16
Truss cross self-tapping screw Φ4x12
stainless steel
1
K06
Truss cross screw M5xP0.8x10
4
K17
Cable transferring head_PAL(M)to
Fhead(F)
1
2015/3/9V1.1+V1.1
4
K07
Truss cross self-tapping screwΦ4x12
3
K18
L shaped hex wrench+cross screwdriver
6x40x120mm(cross)
1
K08
Truss cross screw M4xP0.7x12
2
K19
Truss cross screw M5xP0.8x12
2
K09
Cks hex screw M8xP1.25x15 stainless
steel
4
K20
Truss cross self-tapping screw Φ4x10
2
K10
Spring washer M8 stainless steel
4
K21
Washer Φ4xΦ12x1.0t
1
K11
Washer Φ8xΦ16x1.5t stainless steel
4
3. ASSEMBLE STEPS
STEP 1 ASSEMBLE FRAME AND CONTROL TUBE
Make wire of frame(A) through control tube(B) and tighten control tube(B) on frame(A) with
cks hex screw(K01), spring washer(K02) and washer(K03).
2015/3/9V1.1+V1.1
5
STEP 2 ASSEMBLE CONTROL TUBE AND COTNROL TUBE
DECORATIVE COVER
Tighten control tube decorative cover(F) with truss cross screw(K04) and truss cross
self-tapping screw(K04) as figure showing, then cover screw head cover (L).
2015/3/9V1.1+V1.1
6
STEP 3 ASSEMBLE CONTROL TUBE AND COMPUTER
Connecting the wires of computer(C) and control tube(B) and tighten with truss cross
screw(K06) as figure showing, when assemble, please confirm that it has be locked to
avoid the computer releasing and damaging.
Caution:
: Lower control wire
: Network connecting wire lower
: TV cable lower
: Hand grip pulse wire middle
: Hand grip instant key connecting wire middle
2015/3/9V1.1+V1.1
7
When assemble handle bar and computer, maybe need you sit down and confirm
if there is iron tube upon you to avoid the hurt that hitting on the tube.
When assemble, please aim at the hole and confirm the way of computer.
The wires matched with computer must match with computer's hole to avoid
breaking the wire and cause short circuit.
When assemble, it need two or more than two people at least. One holds the
computer and the other connects the wires and tighten it.
STEP 4 ASSEMBLE COMPUTER DEOCRATIVE COVER, FLASK
HOLDER AND COMPUTER CONTROL TUBE
Tighten computer decorative cover front(H) on control tube with truss cross screw(K19) as
below figure showing, and fix the stuff holder(I) with truss cross self-tapping screw(K20),
then tighten flask holder(J) on control tube with truss cross screw(K08). At last, fix lower
: Hand grip instant key connecting wire upper
: Hand grip instant key connecting wire upper
: Hand grip pulse wire upper
: Control wire upper
: Hand grip pulse wire upper
: Networking connecting wire upper
: TV cable
2015/3/9V1.1+V1.1
8
computer decorative cover (G) on computer with truss cross screw(K07).
STEP 5 ASSEMBLE HANDRAIL AND SEAT
Tighten seat(D) and handrail tube(E) with stainless steel cks hex screw(K09) & spring
washer(K10), washer(K11).
2015/3/9V1.1+V1.1
9
STEP 6 ASSEMBLE FRAME AND SEAT
Insert hand grip pulse wire of seat handle bar into the socket of frame slipping rail, then
tighten seat(D) with stainless steel cks hex screw(K12) & spring washer(K13), washer(K14)
as figure showing.
Tabla de contenidos
