Vantage 5000 1.0v-11.2016
1. Introduction
The Vantage 5000 can be programmed by the user to dene the relationship between the general purpose outputs pins, 5,
6, 7 & 8, available on the 25 WAY Remote I/O Connector, to select pump functionality status. These selectable outputs are
optically isolated and therefore the Input/Output (I/O) port must be powered from either a local i.e. the Vantage 5000, or a
remote, nominal 24V DC power source.
2. Powering the Input/Output Port
The following images show the Vantage 5000 25 WAY Remote I/O Connector, positioned at the rear of the unit, and the
associated pin out assignment and description table:
2.1 Wiring for Voltage Provided by Pump
2.2 Wiring for Remote Voltage Supply
3 | Page
PIN Description PIN Description
1Manual/Auto 14 Start
2Stop 15 Product Source Empty
3Product Destination Full 16 Direction Input
4Slave Steps Input 17 Bund Detection
5 General Purpose Output 3 18 Master Steps Output
6General Purpose Output 4 19 NC (Not Connected)
7General Purpose Output 2 20 0-10V Output
8General Purpose Output 1 21 4-20mA Output
94-20mA Input 22 0-10V Input
10 Remote I/O +24V 23 +24V Pump Supply
11 +10V Analogue Supply 24 NC (Not Connected)
12 0V Analogue Supply 25 0V Pump Supply
13 Remote I/O 0V
Figure 1 25 WAY Remote I/O Connector - Diagram & Description of PINs
13 12 11 10987654321
25 24 23 22 21 20 19 18 17 16 15 14
Description Wiring Diagrams
This is achieved by linking pin 25 (0V Pump Supply)
to pin 13 (remote I/O 0V) and similarly linking pin
23 (+24V Pump Supply) to pin 10 (Remote I/O
+24V). The user should be aware that when using
local voltage sourcing all of the advantages of I/O
isolation are no longer valid.
13 12 11 10987654321
25 24 23 22 21 20 19 18 17 16 15 14
Description Wiring Diagrams
This is achieved by attaching an external 24V DC
supply the positive line of which is connected
to pin 10 (Remote I/O +24V) and the negative is
connected to pin 13 (Remote I/O 0V). This method
of connection ensures that the vantage 5000 is
electrically isolated from any control and feedback
functionality.
24V DC Power Supply
+24V0V
13 12 11 10987654321
25 24 23 22 21 20 19 18 17 16 15 14
Figure 2 Local Power, I/O Not Isolated
Figure 3 Remote Power, I/O Isolated
