Vent-Axia HR500D Instrucciones de montaje

Este manual sirve para los siguientes modelos

1

Tabla de contenidos

Otros manuales de Sistema de calefacción de Vent-Axia

Vent-Axia

Vent-Axia Sentinel Kinetic 200Z Manual de usuario

Vent-Axia

Vent-Axia Sentinel Kinetic CWHL SELV Guía del usuario

Vent-Axia

Vent-Axia Advance MVHR Manual de usuario

Vent-Axia

Vent-Axia Sentinel Kinetic Manual de usuario

Vent-Axia

Vent-Axia AVHR400 Manual de instalación y operación

Vent-Axia

Vent-Axia Air Minder Plus Guía

Vent-Axia

Vent-Axia Sentinel Kinetic 200ZH Guía

Vent-Axia

Vent-Axia HR200WJ Manual de usuario

Vent-Axia

Vent-Axia Sentinel Kinetic MVHR Guía

Vent-Axia

Vent-Axia HR200V Manual de usuario

Vent-Axia

Vent-Axia Kinetic B Left 438222L Guía del usuario

Vent-Axia

Vent-Axia Integra Series Guía

Vent-Axia

Vent-Axia Sentinel Kinetic CWL Guía del usuario

Vent-Axia

Vent-Axia HR300 Manual de usuario

Vent-Axia

Vent-Axia HR100S Manual de usuario

Vent-Axia

Vent-Axia HR500 Instrucciones de montaje

Vent-Axia

Vent-Axia Sentinel Kinetic 200ZP Guía

Vent-Axia

Vent-Axia Advance SX Manual de usuario

Vent-Axia

Vent-Axia 448733 Guía

Vent-Axia

Vent-Axia Sentinel Kinetic B Right Manual de usuario

Vent-Axia

Vent-Axia HR200WK Manual de usuario

Vent-Axia

Vent-Axia HR4 Guía rápida

Vent-Axia

Vent-Axia Lo-Carbon Tempra SELV P Instrucciones de montaje

Vent-Axia

Vent-Axia Kinetic Plus E Guía

Manuales populares de Sistema de calefacción de otras marcas

aerauliqa

aerauliqa QR350ABP Manual de usuario

WatchGas

WatchGas ATEX BEACON Manual de usuario

Viessmann

Viessmann Vitoligno 300-H Instrucciones de funcionamiento

Lampoassa

Lampoassa 203GT Manual de usuario

MSA

MSA SOA-1022 Manual de usuario

nilan

nilan Compact P Manual de usuario

ITR

ITR OASIS NE-S Manual de usuario

Carrier

Carrier 48LJD Dimensiones y guía de instalación

aldes

aldes EVEREST XV Manual de usuario

Kober

Kober C22SPV23MEF Manual de usuario

Oxygen

Oxygen X-Air V400 Manual de usuario

Carrier

Carrier FB4CNF Manual de usuario

Kroll

Kroll HM200 Manual

Kroll

Kroll HM200 Manual

NuAire

NuAire XBOXER XBC Series Manual de usuario

Trane

Trane VR104GD-U Series Manual de usuario

Vents

Vents VUT V mini Manual de usuario

Viessmann

Viessmann Divicon Manual de usuario

Copyright © 2009 Vent-Axia Limited. All rights reserved.

HR500D

Semi-Remote Wall Mounted Heat

Recovery Unit with Spigot

Connections & Integral Fans

Installation and Wiring Instructions

Stock Ref. N°

370450 - HR500D

PLEASE RETAIN THESE INSTRUCTIONS WITH THE PRODUCT.

Warnings & Safety Information

2

IMPORTANT SAFETY

INFORMATION

PLEASE READ THESE

INSTRUCTIONS

CAREFULLY BEFORE

COMMENCING

INSTALLATION.

1. Do not install this product in areas

where the following may be present or

occur:

• Excessive oil or a grease laden

atmosphere.

• Corrosive or flammable gases,

liquids or vapours.

• Subject to direct water spray from

hoses.

• Ambient temperatures higher than

40°C.

• Possible obstructions that may

hinder access to or removal of the unit.

2. All wiring must be in accordance

with the current IEE wiring regulations

BS7671, or appropriate standards of

your country. Installation should be

inspected and tested by a suitably

qualified person after completion.

3. Ensure the mains supply (voltage,

frequency and phase) complies with

the rating label.

4. The power feed to the unit should

be provided with a local double pole

fused spur fitted with a 3A fuse having

a contact separation of at least 3mm.

5. This unit must be earthed.

6. Precautions must be taken to avoid

the back-flow of gases into the building

from the open flue of gas or other fuel-

burning appliances.

7. This appliance is not intended for

use by persons (including children)

with reduced physical, sensory or

mental capabilities, or lack of

experience and knowledge, unless

they have been given supervision or

instruction concerning use of the

appliance by a person responsible for

their safety.

8. Young children should be

supervised to ensure that they do not

play with the appliance.

INSTALLATION GUIDANCE

1. The installer is responsible for the installation and

electrical connection of the system on site. It is the

responsibility of the installer to ensure that the

equipment is safely and securely installed and left

only when mechanically and electrically safe.

2. All regulations and requirements must be strictly

followed to prevent hazards to life and property,

both during and after installation, and during any

subsequent servicing and maintenance.

Disposal

This product should not be disposed of with

household waste. Please recycle where facilities

exist. Check with your local authority for recycling

advice.

3

4

5

6

7

8

9

Product FICHE

10