Venstar ACC-TSEN Manual de usuario
P/N 88-871 Rev.1
Connect to the Air Temperature Sensor as shown
ACC-TSENAir Temperature Sensor
Connect to the thermostat backplate as shown
Use 18 - 22 gauge 2 conductor unshielded thermostat wire. Wire length not to exceed 200 feet.
The Air Temperature Sensor measures indoor or outdoor air temperature with a range of -20 to 120 degrees F.
If used indoors as a remote temperature sensor, the sensor will read room temperature and send the
information to the thermostat. If used as an outdoor temperature sensor, the sensor may be used to provide
outdoor temperature information (which is not used to control heating or cooling). The Air Temperature
Sensor should be mounted out of direct sunlight and in a place that is protected from direct rain and snow.
Mounting the sensor under an eave of a roof or under an overhang of a building is recommended.
Air Temperature Sensor
DOWN
OUTDOOR
OUTDOOR
Thermostat Backplate
White +
Black -
White +
Black -
FC
-20
-10
0
10
20
30
40
50
60
70
80
90
100
110
120
Air Temperature
Ohms
Resistance in
-28.9 106926
-23.3 80485
-17.8 61246
-12.2 47092
-6.7 36519
-1.1 28558
4.4 22537
10 17926
15.6 14356
21.1 11578
26.7 9398
32.2 7672
37.8 6301
43.3 5203
48.9 4317
Air Temperature vs. Sensor Resistance
ACC-TSENAir Temperature Sensor
Tabla de contenidos
Otros manuales de Accesorios de Venstar
Venstar
Venstar ACC0414REC Instrucciones de funcionamiento y seguridad
Venstar
Venstar ACC-FP1xx Manual de usuario
Venstar
Venstar ACC0401 Manual de usuario
Venstar
Venstar ACC0620 Manual de usuario
Venstar
Venstar ACC0410 Manual de usuario
Venstar
Venstar ACC0401 Manual de usuario
Venstar
Venstar ACC0430 Manual de usuario
Venstar
Venstar ACC-TSENWIFI Manual de usuario
Venstar
Venstar ACC-TSENWB Manual de usuario
Venstar
Venstar ACC0435 Manual de usuario
