Velleman USB INTERFACE KIT FOR ROBOTIC ARM Guía del usuario

Assembly and Instruction Manual

Contents : 1. Product Introduction 2. Tools You May Need 3. Mechanical Parts List 4. Disconnect the wired controller and PCB from Robotic Arm5.Install USB PCB and cover6.How it worksUSB INTERFACE KIT FOR ROBOTIC ARMP.1P.1P.1 P.2P.5P.8

Screwdriver1

USB INTERFACE KIT FOR ROBOTIC ARM

P1This is an optional USB InterfaceKit which connects Robotic Arm toWindows personal computer USB port. Product Introduction:12Tools You May Need: Mechanical Parts List:3P2P1PCB CoverQtyQty11USB Wires

P3USB PCB AssemblyQty112Move your “Robotic Arm” to the position as shown.P4CD-RQty1

r:Disconnect the wired controlle and PCB from Robotic Arm

323Disconnect the controller.Unplug 5pcs black connectors.

47465Unscrew yellow cover.Unscrew 3pcs PCB screws.Unscrew 3pcs PCB screws.Unplug 3pcs connectors.Unplug 3pcs connectors.

51P22 Install USB PCB And Cover:5Screw P2 PCB cover tightly.P3RedOrangeBlackBlack

Orange2Fix USB PCB with 3pcs screws.Fix USB PCB with 3pcs screws.1

M3M2M4M1LM1M2LM3M4BlackBlack6

P17

Finished Product

How It Works:5 See operation details from the enclosed CD-R.Note:1. All the five gearboxes equipped with safety gear, when the arm open, close, up or lower to the maximum position, and user keeps pushing the buttons, the safety gear will start to work to protect the gearbox and make 'da, da, da…'sound. 2. To extend the life of gearbox, release the buttons once you hear the safety gear emit 'da, da, da' sound. 3. Please download Adobe Acrobat Reader for the Robotic Arm Use’s Manual.(www.adobe.com)8

Tabla de contenidos

Otros manuales de Equipo de grabación de Velleman