Vdwall LedSync850M Manual de usuario
LedSync850M
Min LED Display Video Processor
User Manual
LedSync850M User Manual
www.cnledsourcing.com
2 / 31
Contents
I. Safety precautions
--------------------------------------------------------- －
II. Item list
---------------------------------------------------------------------------4－4
III. Hardware connections
1. Rear view-------------------------------------------------------------------------5－5
2. Description of ports---------------------------------------------------------- 5－6
. Connection diagram--------------------------------------------------------- 6－6
IV.
Front Panel
1. Diagram --------------------------------------------------------------------------7－7
2. Instructions--------------------------------------------------------------------7－12
V. Settings
1. Enter setup menu----------------------------------------------------------1 －14
2. Select language------------------------------------------------------------14－14
. Output image settings----------------------------------------------------14－15
4. Color/Sharpness-----------------------------------------------------------15－16
5. Version information-------------------------------------------------------16－16
6. Factory settings-----------------------------------------------------------16－17
VI.
Specifications
-----------------------------------------------------------------18－19
VII.
External dimension
--------------------------------------------------------19－19
VIII.
Control software
---------------------------------------------------------20－29
1. Control methods-----------------------------------------------------------20－20
2. User interface---------------------------------------------------------------20－21
. Function introduction---------------------------------------------------21－24
4. User interface settings --------------------------------------------------24－26
5. Timer interface settings -------------------------------------------------26－29
IX.
Copyright information
----------------------------------------------- ----29－29
LedSync850M User Manual
www.cnledsourcing.com
3 / 31
I. Safety precautions
Danger!
There is high voltage in the processor, to prevent any unexpected
danger, unless you are maintenance, please do not open the cover of the
device.
Warning!
a) This device shall not encounter water sprinkle or splash, please do not
place anything containing water on this device.
b) To prevent fire, keep this device far from any fire source.
c) If this device gives out any strange noise, smoke or smell, please
immediately unplug the power cord from receptacle, and contact local
dealer.
d) Please do not plug or unplug DVI signal cable if the device is
powered on.
Caution!
a) Please thoroughly read this manual before using this device, and keep
it well for future reference.
b) In the event of lighting or when you are not going to use the device for
a long time, please pull the power plug out of receptacle.
c) Nobody other than professional technicians can operate the device,
unless they have been appropriately trained or under guidance of
technicians.
d) To prevent e uipment damage or electric shock, please don’t fill in
anything in the vent of the device.
e) Do not place the device near any water source or anywhere damp.
f) Do not place the device near any radiator or anywhere under high
temperature.
g) To prevent rupture or damage of power cords, please handle and keep
them properly.
h) Please immediately unplug power cord and have the device repaired,
when
i. Li uid splashes to the device.
ii. The device is dropped down or cabinet is damaged.
LedSync850M User Manual
www.cnledsourcing.com
4 / 31
iii. Obvious malpractice is found or performance degrades.
II. Item list
Please unpack the product with care, and then check whether all the following
items are included in the package. If anything is found missing, please contact
the dealer.
Standard accessories
The accessories supplied with this LED Display Video Processor may differ
from the figures contained in the User Manual, but they are applicable for the
regions where you live.
1.5m power cord x 1 1.5m DVI cable x 1 1.5m USB cable x 1
BNC-RCA adapter x 1 PCB audio adapter x 1 User manual x 1
Disk x 1
LedSync850M User Manual
www.cnledsourcing.com
5 / 31
III. Hardware connections
1.
Rear view
Figure 1
①audio output ports ② input ports for USB devices ③ USB control port
④input ports for other video signals ⑤ VGA/DVI output ports ⑥AC
power jack and switch ⑦sending card slot (sending card is optional)
2. Description of ports
1) Video input signals (INPUT)
LedSync850M supports 3 video input signals including:
Ports Description
V1 1 X composite video input (PAL/NTSC)
VGA 1X computer analog signal input
DVI 1X digital video interface
2) USB input ports
LedSync850M supports 2 USB inputs for USB drive and mouse.
3) Output ports for video signals
Ports Description
VGA OUT 1 X VGA output port connected to a display
device for monitoring (this port is strongly
suggested to use when control or set up
LedSync850M)
DVI OUT 1X DVI output port connected to a sending
6
1
7
2
4
5
3
LedSync850M User Manual
www.cnledsourcing.com
6 / 31
card or a sending card box
4) Output port for audio signal (AUDIOOUT)
Output the audio signal from USB drive.
5) Control port
USB input port: the upper PC software can be used to control
LedSync820H through this communication port.
. Connection diagram
图2
LedSync850M User Manual
www.cnledsourcing.com
7 / 31
IV. Front panel
1. Diagram
1) (V1, VGA, DVI, USB): to select the input signal.
2) (Setup, knob,↑,↓): to enter the setup menu and configure the image
parameter.
3) (Brt+, Brt-): multi-function keys to adjust the brightness.
4) (C/F): To select the switching effect which is seamless switching (CUT)
or Fade in/Fade out with time needed: 0.5S, 1S, and 1.5S.
5) (Bypass): to select full or part display of DVI/USB/VGA signal. The
defaulted is full display and the indicator shows the current state of
input signal.
6) Shortcut keys to play the files in the USB drive including rewind,
play/pause, fast forward, previous and next.
2. Instructions
LedSync850M has totally 15 front panel keys and some of them are
in operation when LedSync850M is powered on. The functions are as
following:
1) Signal selection
Keys Description
V1 To select the input signal from BNC port V1.
VGA To select the PC input signal from VGA port.
DVI To select the digital video signal from DVI port.
USB To select the input signal from USB port.
1
2
5
6
4
3
LedSync850M User Manual
www.cnledsourcing.com
8 / 31
When select the input signal, it will appear in the first line on the LCD
screen like “input=DVI”. While the current state of selected input
signal will appear in the second line: if there is no valid input signal,
the message “no signal” will appear and the indicator will blink, in the
meantime the screen will be blank and if it is valid, the format of the
signal like “ 1080p_60Hz ” will appear.
2) Brightness adjusting (Brt+, Brt-)
Keys Description
Brt+ To increase the brightness of the output image
until 64 maximally.
Brt- To lower the brightness of the output image until
0 maximally.
LedSync850M supports 32 grades of brightness adjusting. “0” is the
lowest value, while “64” is the highest value. To make sure of the
complete gray level of the output image, the defaulted value is set as
64.
3) VGA auto adjusting (VGA)
When the current selected input signal is valid VGA, press the key
twice and LedSync850M will automatically adjust the sampling
parameters of VGA input to make the image clear and complete.
Normally this operation is only performed when a new VGA input is
connected. The time needed for the adjusting depends on the
condition of the input signal and normally it’s less than 1 minute,
sometimes the operation needs to be performed several times until
the image is clear, complete and stable.
4) Cut/Fade (C/F)
LedSync850M can realize seamless switching (Cut) or Fade
in/Fade out (not available between DVI and USB) between two
Input= DVI
1080p_60Hz
Cut
LedSync850M User Manual
www.cnledsourcing.com
9 / 31
different input signals.
Seamless switching (Cut): while in this mode the message “cut” will
appear in the third line on the LCD screen and the switching effect
between two different input signals will be seamless.
Fade in/Fade out (Fade): while in this mode the message
“Fade=1.0S” will appear in the third line on the LCD screen and the
switching effect between two different input signals will be Fade
in/Fade out. The time needed for the switching can be set as 0.5S,
1.0S or 1.5S.
5) Full display / part display (Bypass)
The key is used for switching between full display and part display
of VGA/DVI/USB. When the selected input signal is V1, to press the
key won’t change its display status.
Status
Description
Full The display status is full-screen. The output image is
compressed to be fully displayed on LED screen and the
indicator is OFF.
Part In this mode, only a part of the output image will be
displayed on the LED screen because it is not
compressed and the indicator is ON.
Remark: when the width and height of VGA/DVI input signal is
lower than those of the LED screen (say the out_Hori_width or
out_Vert_height), this function is invalid.
6) USB shortcut keys (rewind, play/pause, fast forward, previous, stop,
next, knob -, knob +)
When the selected input signal is USB, press USB three times to
enter Play status and the following message will appear (when play
pictures, there is no reminder like “Volume ＋/－”):
When play videos, 8 shortcut keys are all available (knob – and
knob + are used to adjust volume).
When play pictures, only “play/pause, previous and next” are
Playing：
向日葵.MOV
Volume ＋/－
Volume
25
LedSync850M User Manual
www.cnledsourcing.com
10 / 31
available.
7) Setup menu of USB play (USB, Setup, ↑, ↓, knob, OK)
During playing files in the USB drive, press “Setup” and then “OK”
to enter the setup menu. Press “↑,↓” to reach different items and
then “OK” to enter the sub-menu or “Setup” to return to the main
menu.
Menu settings of video playing: video list, play mode (single play,
order play or random play)
Menu settings of picture playing: picture playing, play mode (single
play, order play or random play), time interval (5S, 10S, 15S, 20S)
Interface of video list and play mode:
Interface of picture list, play mode and time interval:
8) Add or delete files in USB (only by mouse)
Video Playing <-
Picture Playing
Abc.mpg <-
123.mpg
Single play <-
Order play
Random play
123.JPG <-
ABC.JPG
AABB.JPG
Single play <-
Order play
Random play
5 S <-
10 S
15 S
20 S
Otros manuales para LedSync850M
1
Tabla de contenidos
Otros manuales de Reproductor de DVD de Vdwall
