VARO CAW-02013 Manual de usuario
SAMSUNG POWERED
WIFI SURROUND SPEAKER
MODEL:CAW-02013
PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE
OPERATION AND KEEP IT FOR FUTURE REFERENCE
2
WARNING:Changes or modifications to this unit
not expressly approved by the party responsible
for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful interference
in a residential installation. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV
technician for help.
•
•
•
FCC Warnings
FCC NOTICE:
To assure continued compliance, follow the attached
installation instructions and use only shielded cables
when connecting to other devices. Modifications not
authorized by the manufacturer may void user’s
authority to operate this device.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated
with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
3
4
LOCATION OF CONTROLS
TOP VIEW
FRONT VIEW
REAR VIEW
1. Play/Pause (WiFi Pairing) Button
2. Previous (Volume Down) Button
3. Next (Volume Up) Button
4. Mode (Power On/Off) Button
6. WiFi Indicator
7. Bluetooth Indicator
8. AUX IN Indicator
9. SD/USB Indicator
10. OPTICAL Indicator
12. AUX IN Jack
11. DC IN Jack
1 2 3 4
5
6 7 8 9 10
11 12 13 14
MAIN UNIT:
5. Battery Indicator
14. SD Card Slot
13. USB Port
Accessories:
Specification
Power supply...............................................................................................9V 2A
Speakers.................................................................................................................2 X 6W(RMS)
1 X 3.5mm Stereo AUX IN Cable
1 X Instruction Manual
1 X AC/DC Adapter for the main unit (9V, 2A )
1 X Velvet Bag
Running Time..........................................................................around 5 hours(with 50% volume)
Recharging Time..................................................................................................around 4 hours
Bluetooth working range..................................................................32 feet (tested in open area)
WiFi working range...............................................................................................approx. 96 feet
Bluetooth version...................................................................................................................V4.1
5
RECHARGING
The battery indicator will flash blue during low battery level.
Battery Indicator
Battery Indicator Button
Using the supplied Adapter to recharge through the DC IN jack at the rear of the main unit.
During playing, press the battery indicator button to display the battery level.
Battery Indicator
The red indicator will light up when charging, it will turn blue after fully charged.
6
BLUETOOTH OPERATION
Pairing the speaker with Bluetooth devices (phone or music device)
1. Press and hold the button to turn on the unit.
5. Once paired successfully, Bluetooth indicator will stop blinking and a tone will be heard.
6. If pairing is unsuccessful, turn off the speaker first and then re-pair following above steps.
M
2. Press the button repeatedly to turn to Bluetooth mode, the Bluetooth indicator on
M
front of the unit will light up and blink, and a tone sounds, now it is entering pairing mode.
3. Activate the Bluetooth function on your Bluetooth device (phone or music device). Please
refer to the manufacturer’s instructions of your device.
4. Once you have activated Bluetooth on your device, select the speaker “CAW-02013” from
the list of available Bluetooth devices.
7. Once you have paired the speaker with a device, the speaker will remember this device
and will pair automatically when the device’s Bluetooth is activated and in range.
8. If you want to pair it with a new device, press and hold the button to disconnect the
current pairing.
During playing:
A:Press the or button to skip to previous or next track.
B:Press the button to pause, press again to resume playing.
C:Press and hold the or button to decrease or increase the volume.
NOTE:
During playing, please do not insert the AUX IN cable into the AUX IN Jack, or it will switch
to AUX IN mode, the AUX IN indicator will light up, it will switch to WiFi mode when unplug
7
the AUX IN cable.
2. Press and hold the button to turn on the unit.
M
3. Press the button repeatedly to turn to AUX IN mode, the AUX IN indicator on
M
front of the unit will light up.
~ Insert the other end to the AUX IN jack on the rear of the main unit.
1. Connected the external audio device to the unit by an
~ Insert one end to the Phone; Line Out or AUX Out Jack on the external audio device.
audio connection cable with 3.5mm
stereo mini jacks as:
Mobile Phone
(Audio Connection Cable supplied) To AUX IN jack on
the rear of the unit
Connect to the Phones; AUX Out;
Line Out Jack of the external devices
(Such like MP3 Player; cell phones;
iPod/iPad ... etc)
AUX IN OPERATION
4. Play music as usual on your external device.
MP3
8
NOTE: It will switch to AUX IN mode when AUX IN cable plugged into the AUX IN jack in
any other modes( such as WiFi, Bluetooth, USB, SD, OPTICAL).
USB/Sd OPERATION
NOTE: Only the USB or SD Card inserted to the unit can the USB/SD mode be selected.
The latter one inserted to the unit will be played first.
USB Sd
1. Insert the USB device or SD memory card into the USB port/card slot as shown above figure.
2. Press and hold the button to turn on the unit.
M
3. Press the button repeatedly to turn to USB/SD mode, the USB/SD mode indicator on
M
front of the unit will light up.
During playing:
A:Press the or button to skip to previous or next track.
B:Press the button to pause, press again to resume playing.
C:Press and hold the or button to decrease or increase the volume.
4. The unit will automatically play the track after a few seconds.
REAR VIEW OF THE UNIT
9
CONNECTION THROUGH OPTICAL
TV; DVD player; BD player... etc.
4. Power on the connected external player and start playback the Music as usual. Turn on
1. Connect the Optical out jack from the external audio Player (such like TV, DVD Player,
BD Player …etc.) to the
(not supplied) as the figure below: ( F or PCM format only )
follows figure:
Bass
Treble
Balance
Select Move MENU Exit
Sound Mode Standard
Surround Off
AVL Off
Audio Language English
Picture Time Setup Lock Off
AudioAudio
Digital Output PCMDigital Output PCM
OPTICAL IN jack on the subwoofer by the optical connection
cable
the digital audio output and set it to PCM (Plus Code Modulation) type similar to the
Optical Connection Cable (not supplied)
OP TIC A L
ON
OFF
PO WER
DC 1 6V
REAR VIEW OF THE SUBWOOFER
3. Press the button repeatedly to turn to optical mode, the OPTICAL IN indicator on
M
front of the unit will light up.
2. Connect the AC/DC adapter to the wall outlet, the power indicator will light up red.
Put the power switch to "ON" position to turn on the subwoofer.
NOTE: The OPTICAL function can only work when the subwoofer installed with the main unit.
10
Tabla de contenidos
Otros manuales de Oradores de VARO
