Vaporfi Rebel Manual de usuario

USER MANUAL

ENGLISH • ESPAÑOL

VAPORFI REBEL USER MANUAL

Thank you for purchasing the VaporFi Rebel Electronic Cigarette.

In order to use your electronic cigarette correctly, efficiently and

safely, please follow the instructions in this manual.

THE VAPORFI REBEL STARTER KIT INCLUDES:

» 1 Telescopic Variable Voltage Vaporizer

» 1 Rechargeable High Capacity Battery

» 1 Rechargeable Standard Capacity Battery

» 1 Titan Dual Head Tank Cartomizer

» 1 Wall Charger

» 1 User Manual

REBEL FEATURES

» Adjustable from 3.0-6.0 Volts in 0.1 Volt increments.

» Built-in three digit display allows you to visually adjust voltage and wattage settings.

» Works with either one (1) 18650 battery or two (2) specially designed 18350 high-power

batteries, and reverse connect protection.

» Available in stainless steel finish.

» 510 and Ego thread compatible.

» 15 Watt maximum output.

» Adjustable power from 3.0-6.0 Watts in 0.5 increments

» Rebel PCB allows up to 4 AMPS of output.

» Non-stick 360 degree rotating button.

1. (UU) ADJUSTING THE VOLTAGE UP

The Rebel’s built-in LED display allows you to dial in your preferred voltage level.

1. Press the button 3 times until “1.Uu” is shown on the display.

2. When “Uu” is shown on the display, leave the button idle for 2 seconds.

3. The display will now show the factory default setting of 3.0 Volts. To adjust, simply

depress the button to advance to the next higher voltage setting (3.0, 3.1, 3.2, 3.3, etc.).

When you reach 6.0, the Rebel will reset back to 3.0 volts.

4. Once you have reached your desired voltage level, leave the button idle for 2 seconds to

lock in your selection, and resume to normal operation.

NOTE: The heating element gets hotter as the voltage level increases. Always start at

a lower voltage setting and increase the power until you are satisfied with the vapor

production. If you are unhappy with your selection, press button 3 times to make another

change.

2. (UD) ADJUSTING THE VOLTAGE DOWN

ADJUST VOLTAGE DOWN

This mode allows you to turn the voltage down without having to click through an entire

rotation before reaching a lower voltage setting.

1. Press the button 4 times until “2.Ud” is shown on the display.

2. When “Ud” is shown on the display, leave the button idle for 2 seconds.

3. The display will now show the current voltage setting. To adjust, simply depress the

button to advance to the next lowest voltage setting (6.0, 5.9, 5.8, 5.7, etc.). After you

reach 3.0, the Rebel will reset back to 6.0 volts.

4. Once you have reached your desired voltage level, leave the button idle for 2 seconds to

lock in your selection, and resume to normal operation.

NOTE: If you are unhappy with your selection, simply press the button 4 times to

make another change.

3. (SO) ON/OFF & STANDBY MODE

The Rebel has 2 modes of operation—On or Standby/Off. Standby/Off mode will disable

the atomizer/cartomizer and the adjustment settings even if the button is depressed.

This mode is convenient for storing in a bag or pocket, where it otherwise could be

accidentally turned on.

1. The factory default setting is ON. To change to OFF/Standby, press the button 5 times

in a row until “3.So” is shown on the display.

2. When “So” is shown on the display, leave the button idle for 2 seconds and the display

will then show the last setting selected “On” or “Of”

3. The device will toggle between On or Of each time the button is depressed.

4. Once you have reached your desired setting, leave the button idle for 2 seconds to lock

in your selection. If you have selected “Of” the Rebel will go into Standby mode.

5. To turn the device back on and access the menu function, depress the button 5 times in a

row or simply remove the battery and re-insert.

4. (UC) CHECK THE BATTERY VOLTAGE

This mode allows you to check the voltage level of the battery.

1. Press the button 6 times in a row until “4.Uc” is shown on the display.

2. When UC is shown on the display, leave the button idle for 2 seconds.

3. The display will show the current battery voltage measurement (range between 3.2-8.4)

for 2 seconds before turning off.

NOTE: It is normal for your atomizer/cartomizer to activate at a very low voltage while in

battery check mode.

5. (DS) DISPLAY CHANGE

This mode allows you to view the Atomizer/Cartomizer ohms measurement, battery

voltage, and your atomizer/cartomizer output voltage. This feature is useful if you want

to double-check which type of atomizer/cartomizer you have installed, as well as the

atomizer/cartomizer voltage when the battery is working.

1. The factory default setting is OFF.

2. Press the button 7 times in a row until “5.Ds” is shown on the display.

3. When Ds is shown on the display, you can choose between Do (for atomizer/cartomizer

output voltage), Du (for battery voltage), or Dr (for atomizer/cartomizer resistance).

This will display a range from 2.9-2.2 Volts.

4. Voltage will be displayed for 2 seconds before turning off.

NOTE: It is normal for your atomizer/cartomizer to activate at a very low voltage while in

Ohms mode. This allows the Rebel to check the resistance.

Tabla de contenidos

Otros manuales de Vaporizador de Vaporfi

Vaporfi

Vaporfi VOX 60 TC Manual de usuario

Vaporfi

Vaporfi VAIO 80 TV Manual de usuario

Vaporfi

Vaporfi PULSE Manual de usuario

Vaporfi

Vaporfi V-GRIP 220 Manual de usuario

Vaporfi

Vaporfi ATOM Instrucciones de funcionamiento y mantenimiento

Vaporfi

Vaporfi AIR 2 Manual de usuario

Vaporfi

Vaporfi VEX 75 TC Manual de usuario

Vaporfi

Vaporfi PRO II Manual de usuario

Vaporfi

Vaporfi VAIO 75 TC Manual de usuario

Vaporfi

Vaporfi VOLT Manual de usuario

Vaporfi

Vaporfi VEX 150 TC Manual de usuario

Vaporfi

Vaporfi VAIO 75 TC Manual de usuario

Vaporfi

Vaporfi VOX 80 TC Manual de usuario

Vaporfi

Vaporfi VOLT 2 Manual de usuario

Vaporfi

Vaporfi V-GRIP Manual de usuario

Manuales populares de Vaporizador de otras marcas

Vivant

Vivant Dabox Pro Manual de usuario

Pulsar

Pulsar Triad Manual de usuario

Smok

Smok MAG Manual de usuario

Puzhen

Puzhen Bamboo Manual de usuario

XVAPE

XVAPE FOG PRO Manual de usuario

DaVinci

DaVinci MIQRO Manual de usuario

iQOS

iQOS lil SOLID 2.0 Manual de usuario

CHART

CHART VaporMan 125 Manual de usuario

InnoCigs

InnoCigs EGRIP 2 LIGHT Manual de usuario

OOZE

OOZE Movez Manual de usuario

STORZ & BICKEL

STORZ & BICKEL Volcano Hybrid Manual de instrucciones

STEAMAX

STEAMAX STICK X8 Manual de usuario

Storz & Bickel GMBH

Storz & Bickel GMBH Crafty Manual de usuario

Joyfect

Joyfect Freaky One Manual de usuario

SIGELEI

SIGELEI 213 FOG Manual de usuario

Eleaf

Eleaf Lemo 2 Manual de usuario

Vapor Brothers

Vapor Brothers VB Eleven Pen Manual de usuario

STORZ & BICKEL

STORZ & BICKEL VOLCANO CLASSIC Manual de usuario