Vanco Evolution EVSP4K12 1x2 Manual de usuario
4K HDMI® Splitters
Part Numbers:
EVSP4K12 1x2
EVSP4K14 1x4
EVSP4K18 1x8
www.vanco1.com • 800.626.6445
4K HDMI®
S P L I T T E R S
www.vanco1.com 800.626.6445
2
1. Do not expose this unit to water, moisture, or
excessive humidity.
2. Do not install or place this unit in a built-in
cabinet, or other conned space without
adequate ventilation.
3. To prevent risk of electrical shock or re
hazard, due to overheating do not obstruct
unit’s ventilation openings.
4. Do not install near any source of heat,
including other units that may produce heat.
5. Do not place unit near ames.
6. Only clean unit with a dry cloth.
7. Unplug unit during lightening storms or when
not used for an extended period of time. A
surge protector is strongly recommended.
8. Protect the power cord from being walked on
or pinched, particularly at the plugs.
9. Use unit only with accessories specied by
the manufacturer.
10. Refer all servicing to qualied personnel.
CAUTION
HDMI is a very complex technology requiring continuous authentication of the signal and the same
video resolution and audio settings on all electronic equipment in the system. When there are multiple
sources and displays, the video resolution and audio setting on all connected units must be adjusted
to correspond with that of the display having the lowest video and audio capability.
WARNING
DEAR CUSTOMER
Thank you for purchasing this product.
For optimum performance and safety, please
read these instructions carefully before connecting, operating or
adjusting this product. Please keep this manual for future reference.
This product is 100% inspected and tested in the United States to verify
HDMI performance parameters.
www.vanco1.com 800.626.6445 3
INTRODUCTION
The Evolution by Vanco EVSP4K12, EVSP4K14 and EVSP4K18 with HDCP 2.2, 4K/60Hz, and 4:4:4 chroma capability, are
the most up to date HDMI splitters that are compliant with HDCP 2.2 displays and sources. Also features EDID management,
with different modes to ensure compatibility with source and display combinations. Supports LPCM 7.1CH, Dolby TrueHD, and
DTS-HD Master Audio for advanced audio setups. Take any 4K source and split the signal to multiple 4K displays to ensure the
highest quality possible with the Evolution 4K HDMI Splitters!
Note: To achieve 4K video quality, all connected displays must be able to handle 4K resolution. Any lower resolution display
connected, will affect the overall resolution the splitters output to all ports.
FEATURES
1x2 HDMI® 4K Spiltter
Part # EVSP4K12
• Transmits audio and video from a single source to 2 HDMI outputs up to 4K2K (2160p) Ultra High
Denition resolution without any loss of quality or resolution
• Supports video formats up to 4K2K@60Hz with 12bit YCBCR 4:4:4 and HDR
• 3D frame sequential video format up to 1080p@60
• Supports high resolution VESA mode video format up to QSXGA 2560x2048@60Hz
• Compliant with HDCP 2.2 sources and backwards compatible with older versions of HDCP
• Dynamic and Manual EDID management modes to ensure compatibility during installation
• Supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio
• Supports Hot-plug
• High bandwidth: 18 Gbps
• Features status indicator for connection & input HDCP compliance
• Can be cascaded with other Evolution by Vanco products to create additional output options or to create
an expanded distribution system
• Dimensions: 4” W x .7” H x 2.3” D
PACKAGE CONTENTS
• EVSP4K12 4K HDMI 1x2 Splitter
• 1 DC 5V Power Supply
• Product Manual
www.vanco1.com 800.626.6445
4
1x4 HDMI® 4K Spiltter
Part # EVSP4K14
• Transmits audio and video from a single source to 4 HDMI outputs up to 4K2K (2160p) Ultra High
Denition resolution without any loss of quality or resolution
• Supports video formats up to 4K2K@60Hz with 12bit YCBCR 4:4:4 and HDR
• 3D frame sequential video format up to 1080p@60
• Supports high resolution VESA mode video format up to QSXGA 2560x2048@60Hz
• Compliant with HDCP 2.2 sources and backwards compatible with older versions of HDCP
• Dynamic and Manual EDID management modes to ensure compatibility during installation
• Supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio
• Supports Hot-plug
• High bandwidth: 18 Gbps
• Features status indicator for connection & input HDCP compliance
• Can be cascaded with other Evolution by Vanco products to create additional output options or to create
an expanded distribution system
• Dimensions: 6.4” W x .6” H x 2.5” D
PACKAGE CONTENTS
• EVSP4K14 4K HDMI 1x4 Splitter
• 1 DC 5V Power Supply
• Product Manual
www.vanco1.com 800.626.6445 5
1x8 HDMI® 4K Spiltter
Part # EVSP4K18
• Transmits audio and video from a single source to 4 HDMI outputs up to 4K2K (2160p) Ultra High
Denition resolution without any loss of quality or resolution
• Supports video formats up to 4K2K@60Hz with 12bit YCBCR 4:4:4 and HDR
• 3D frame sequential video format up to 1080p@60
• Supports high resolution VESA mode video format up to QSXGA 2560x2048@60Hz
• Compliant with HDCP 2.2 sources and backwards compatible with older versions of HDCP
• Dynamic and Manual EDID management modes to ensure compatibility during installation
• Supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio
• Supports Hot-plug
• High bandwidth: 18 Gbps
• Features status indicator for connection & input HDCP compliance
• Can be cascaded with other Evolution by Vanco products to create additional output options or to create
an expanded distribution system
• Dimensions: 9.6” W x .6” H x 4.1” D
PACKAGE CONTENTS
• EVSP4K18 4K HDMI 1x8 Splitter
• 12V2.5A DC Power Supply
• Product Manual
www.vanco1.com 800.626.6445
6
SPECIFICATIONS
Video Bandwidth ........................................................ 600MHz/18Gbps
Input Ports................................................................ 1 × HDMI (Female type)
Output Ports ............................................................. 2, 4 or 8 × HDMI (Female type),
Output Resolution ...................................................... 480i-1080p@50/60Hz; 2160p@24/30Hz;
2160p@60Hz; VESA Formats up to QSXGA 2560x2048@60Hz
ESD Protection .......................................................... Human Body model: ±8 kV (air-gap discharge) ±4 kV
(contact discharge)
Power Supply ............................................................ 1x2, 1x4: 5V/2A DC; 1x8: 12V 2.5A DV (US/EU
standards, CE/FCC/UL certied)
Dimensions ............................................................... 1x2: 4” W x .7” H x 2.3” D; 1x4: 6.4” W x .6” H x
2.5” D; 1x8: 9.6” W x .6” H x 4.1” D
Weight ..................................................................... 1x2, 1x4: 0.6 lb.;1x8: 1.4 lb.
Chassis Material........................................................ Metal
Operating Temperature............................................... 0 °C~40 °C/ 32 °F~104 °F
Storage Temperature ................................................. −20 °C ~ 60 °C/−4 °F ~140 °F
Relative Humidity....................................................... 20~90 % RH (non-condensing)
Power Consumption (Max) .......................................... 1x2, 1x4: 10W; 1x8: 30W
www.vanco1.com 800.626.6445 7
PANEL DESCRIPTIONS
EVSP4K12
1 2 3 2 4 5
6 7 8
1. POWER LED: Illuminates when the splitter is connected to power
2. OUTPUT 1/2 LED: Illuminates when a display is connected to “HDMI OUT 1/2” and is powered on
3. IN LED: Illuminates when the source is connected and is powered on
4. EDID: See EDID Management section for explanation of adjustment
5. EDID: See EDID Management section for explanation of adjustment
6. HDMI OUTPUT 1/2: Connect an HDMI display such as an HDTV or Projector; either port can also be used
to cascade or daisy-chain to another splitter, to create additional outputs
7. HDMI IN: Connect a source such as a Set Top Box, Game Console, or media player/streamer
8. DC 5V IN: Connect the included power supply to power the unit
6
www.vanco1.com 800.626.6445
8
PANEL DESCRIPTIONS
EVSP4K14
12 3 5
7 8 9
1. POWER LED: Illuminates when the splitter is connected to power
2. OUTPUT 1/2/3/4 LED: Illuminates when a display is connected to “HDMI OUT 1/2/3/4” and is powered on
3. IN LED: Illuminates when the source is connected and is powered on
4. SERVICE: Used for any future rmware updates available on the product page (downloads section) on
www.vanco1.com
5. EDID: See EDID Management section for explanation of adjustment
6. EDID: See EDID Management section for explanation of adjustment
7. HDMI OUTPUT 1/2/3/4: Connect an HDMI display such as an HDTV or Projector; any port can also be
used to cascade or daisy-chain to another splitter, to create additional outputs
8. HDMI IN: Connect a source such as a Set Top Box, Game Console, or media player/streamer
9. DC 5V IN: Connect the included power supply to power the unit
2 4 6
7
www.vanco1.com 800.626.6445 9
1. POWER LED: Illuminates when the splitter is connected to power
2. OUTPUT 1/2/3/4/5/6/7/8 LED: Illuminates when a display is connected to “HDMI OUT 1/2/3/4/5/6/7/8”
and is powered on
3. IN LED: Illuminates when the source is connected and is powered on
4. SERVICE: Used for any future rmware updates available on the product page (downloads section) on
www.vanco1.com
5. EDID: See EDID Management section for explanation of adjustment
6. EDID: See EDID Management section for explanation of adjustment
7. HDMI OUTPUT 1/2/3/4/5/6/7/8: Connect an HDMI display such as an HDTV or Projector; any port can
also be used to cascade or daisy-chain to another splitter, to create additional outputs
8. HDMI IN: Connect a source such as a Set Top Box, Game Console, or media player/streamer
9. DC 12V IN: Connect the included power supply to power the unit
1 2 3 5
7 8 9
2 4 6
7
PANEL DESCRIPTIONS
EVSP4K18
www.vanco1.com 800.626.6445
10
EDID MANAGEMENT
Extended Display Identication Data (EDID) is a data structure provided by a digital display to describe its
capabilities to a video source (e.g. graphics card or set-top box). In a nutshell, the display provides its EDID
info to the source to send the proper signal format, this is essential for a proper handshake to occur.
• When making any adjustments to EDID, turn off every component (splitter, source, and all displays), then
turn on splitter rst, followed by the source, then the main display (HDMI Output 1). Finally, turn on all
other displays after ensuring the correct video signal is displaying on the main display.
• When in ‘TV’ mode, the unit will read the EDID settings of the display device connected to HDMI OUT
1 (Output 1 should be the main display connected). This is an auto setting and should be set to if 4K
resolution is desired. If Output 1 detects a 4K2K capable EDID setting, the splitter will transmit the
signal in that resolution format to all outputs. If no 4K2K capable EDID is detected, then the unit will
output the best resolution that all displays can support.
• When in ‘STND’ mode, the splitter will use its own built-in EDID settings. In this mode, the EDID will
default to 1080p@60Hz and LPCM 2CH Stereo audio. Use this mode if there are display issues in TV
Mode.
Note: To achieve 4K video quality, all connected displays must be able to handle 4K resolution. Any lower
resolution display connected, will affect the overall resolution the splitters output to all ports, and the splitter
will use the highest resolution that all displays connected can handle.
Otros manuales para Evolution EVSP4K12 1x2
1
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Cables y conectores de Vanco
Vanco
Vanco Evolution EVSLIM12 Manual de usuario
Vanco
Vanco 280718 Manual de usuario
Vanco
Vanco 280902 Manual de usuario
Vanco
Vanco Evolution EVSP4K12 1x2 Manual
Vanco
Vanco EVSLIM14 Manual de usuario
Vanco
Vanco Evolution EVSP1017 Manual de usuario
Vanco
Vanco Evolution EV4K7014 Manual de usuario
Vanco
Vanco Evolution EVSP12SC Manual de usuario
