Valor Plus Manual de usuario
SAFETY AND SAVINGS
Your Valor®
Remote Control
We hope you enjoy your Valor®Radiant Gas
Fireplace. Refer to these simple remote control
instructions and keep them handy to enjoy your
replace to the fullest.
For our video guide, visit
Sincerely,
The Valor Family,
BRREM20E Mar
GETTING STARTED
Press OFF and high ame button
until you hear beeping.
Takes up to 20 seconds.
Press OFF and low ame button
to change display.
Press high and low ame
buttons until time 6:00 ashes.
To set hour—
press high ame button.
To set —
press low ame button.
GETTING STARTED
REMOTE CONTROL
To turn up, press high ame button.
To turn down, press low ame button.
Press low ame button until
the replace ames shut o.
Press OFF.
Tip:
During extreme cold weather,
keep your replace ON to avoid
problems starting up.
WALL SWITCH
WALL SWITCH
Press button
until you hear beeps.
Press button until replace
and pilot ame shut o .
You can’t control the thermostat
or timer with the wall switch. Use
remote instead.
SAFETY + SAVINGS
7–DAY PILOT SHUTDOWN
If there is no activity after seven days, the
Valor SmartPilot System automatically shuts o
the pilot.
Benet
The seven day pilot shutdown is ideal if you happen
to be away from home for an extended period of
time or don’t need the heat during warmer Spring
and Summer months—you could save up to 5
months of unnecessary pilot consumption per year.
8–HOUR TURNDOWN
If your replace ame height hasn’t changed
and you haven’t used your remote for
eight hours, your ValorStat Remote Control
System automatically turns your replace
down to pilot.
Benet
Save money in the long run. Use the temperature
and timer modes to maximize your heating
experience even more.
FAN + LIGHTING
CIRCULATING FAN*
Click SET button until fan ashes.
• To fan speed—
press high ame button.
• To fan speed—
press low ame button.
Press low ame button until all four
speed level bars disappear.
* Remote control with Valor Max remote only. Options available on select models.
OVERHEAD LIGHTING*
Click SET button until light bulb ashes.
• To turn on or light—
press high ame button.
• To light—
press low ame button.
Press OFF.
SET TEMPERATURE
SET THE TEMPERATURE
You can set a warmer and a cooler
temperature twice in one day.
Click SET button until TEMP appears.
Press SET button until temperature
ashes.
To temperature, press
high ame button. To
temperature, press low ame button.
Click SET button so TEMP appears.
Press SET button until temperature
ashes.
Then, select temperature.
Press to save temperature settings,
or let remote automatically save the
setting after a few seconds.
To use temperature setting, make
sure TEMP mode is selected.
Click SET button to select
or temperature.
SET TIMER
SET THE TIMER
You can program two heat cycles for di erent times in
the day. Both cycles, P1 and, have a start and
an end time. Cycles cannot overlap. Before you set
the timer, set the temperature.
Click SET button until TIMER appears.
Press SET button until time 6:00 ashes. P1
appears.
To set the hour, press high a m e
button. To set the ,
press low ame button.
Click SET button so P1
appears. Then, select time.
Click SET button so
appears. Then, select time.
Click SET button so
appears. Then, select time.
Press to save temperature
settings, or wait a few seconds.
Only want one heat cycle?
Set the time for these three: P1 and .
BATTERIES
BATTERIES IN REMOTE
Your remote display indicates when
the battery is low.
The remote uses a
The
battery should last ,
depending on usage. Remove the
battery in the o-season to
.
Still not working? Did you know every
remote has a receiver that uses
batteries? See basic instructions
on next two pages.
Otros manuales para Plus
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Mando a distancia de Valor
Valor
Valor GV60 SYMAX Manual de usuario
Valor
Valor 10 Manual de usuario
Valor
Valor GV60 NTK Manual de usuario
Valor
Valor GV60 PLUS Manual de usuario
Valor
Valor 700 Manual de usuario
Valor
Valor GV34 Manual de usuario
Valor
Valor Plus Manual de usuario
Valor
Valor GV60 MAX Manual de instalación
Valor
Valor GV60NTK Manual de instalación
Valor
Valor 1265WSK Manual
