Valor 956 Instrucciones de uso
5118756/06
© GDC Group Ltd. 2014
We trust that this guide gives
sufficient details to enable this
appliance to be installed, operated
and maintained satisfactorily.
However, if further information is
required, our
Valor Fires Technical Helpline will
be pleased to help.
Telephone 0844 879 35 88 (National
call rates apply in the United
Kingdom).
n the Republic of reland
Telephone 01 842 8222.
NSTALLER: Please leave this guide with the owner
INSTALLER AND OWNER GUIDE
Model 956
NSET L VE FUEL EFFECT GAS F RE
Fitted with one of the following fascia.
Blenheim,Whitsbury
Seattle or Siva fascia.
GDC Group Limited.
All rights reserved. No part of this publication may be reproduced in any material form
(including photocopying), stored in any medium by electronic means (including in any
retrieval system or database) or transmitted, in any form or by any means, whether
electronic, mechanical, recording or otherwise, without the prior written permission of
the copyright owner.
Applications for the copyright owner's permission to reproduce any part of this
publication should be made, giving details of the proposed use, to the following
address: The Company Secretary, GDC Group Ltd., Millbrook House, Hedge End,
Southampton, SO30 2DF.
Warning: Any person who does any unauthorised act in relation to a copyright work
may be liable to criminal prosecution and civil claims for damages.
Valor Fires, GDC Group Ltd., Millbrook House, Hedge End, Southampton, SO30 2DF
www.valor.co.uk
Because our policy is one of constant development and improvement, details may vary
slightly from those given in this publication.
Page 2
© GDC Group Ltd 2014
THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20).
WHEN CONVERTED USING CONVERSION KIT NO. 0595221 THIS APPLIANCE
IS FOR USE WITH PROPANE GAS (G31).
THIS APPLIANCE IS SUITABLE ONLY FOR INSTALLATION IN THE UNITED
KINGDO (GB) AND THE REPUBLIC OF IRELAND (IE).
NSTALLER GU DE
Safety First.
Valor Fires fires are CE Approved and designed to meet the appropriate British
Standards and Safety Marks.
Quality and Excellence.
All Valor Fires fires are manufactured to the highest standards of quality and
excellence and are manufactured under a BS EN SO 9001 quality system accepted
by the British Standards nstitute.
The Highest Standards
Valor Fires is a member of SBG and HH C (Heating and Hot water ndustry Council)
that work to ensure high standards of safety, quality and performance.
Careful Installation
This gas fire must be installed by a competent GAS SAFE REG STER engineer (GAS
SAFE REG STER or CORG engineer outside of UK) in accordance with our installer
guide and should not be fitted directly on to a carpet or floor of combustible material.
Page 3
© GDC Group Ltd 2014
NSTALLER GU DE
Page 4
© GDC Group Ltd 2014
NSTALLER GU DE
FOR OWNER GU DE SEE PAGES 38 TO 51
NSTALLER GU DE
CONTENTS
Section Heading Page
INSTALLER GUIDE 4 - 37
OWNER GUIDE 38 - 51
1. I AGES 7
2. SAFETY 8
3. APPLIANCE DATA AND EFFICIENCY 9
3.1 General information. 9
3.2 Efficiency. 9
4. GENERAL INSTALLATION REQUIRE ENTS 10
4.1 Regulations, Standards and Law. 10
4.2 Ventilation requirements. 11
4.3 The Atmosphere sensing device (ASD). 11
4.4 Fireguard requirements. 11
4.5 Room considerations. 11
4.6 Chimney preparation. 12
4.7 Fireplace preparation. 12
4.8 The hearth. 12
4.9 Fireplace clearances. 13
4.10 nstallation options. 15
4.10.1 Conventional fireplace and hearth. 15
4.10.1.1 ‘Hole-in-the-wall’ nstallations. 15
4.10.2 Metal flue box and hearth. 16
4.10.3 Precast concrete or clay flue block system and hearth. 16
4.11 Flues. 17
4.12 Propane gas fires. 18
5. PACK CONTENTS 18
6. FIREPLACE CHECK 21
6.1 Soundness for appliance attachment. 21
6.2 Fireplace flue pull. 21
7. IGNITION CHECK 21
8. GAS SUPPLY CONNECTION 22
9. PREPARING APPLIANCE FOR INSTALLATION 23
9.1 Appliance preparation. 23
9.2 Fitting the foam seal (All models). 23
9.3 The flue restrictor. 23
Page 5
© GDC Group Ltd 2014
NSTALLER GU DE
CONTENTS (Continued)
Section Heading Page
10. HOTBOX INSTALLATION 24
10.1 Method 1- Front fixing to fireplace surround. 24
10.2 Cable retention. 24
10.3 Floor sealing. 26
11. BURNER INSTALLATION 27
11.1 Burner and supply pipe installation. 27
11.2.Lighting the burner. 27
11.3 Operating the burner. 27
11.4 nlet pressure check. 28
11.5 Fitting the burner tray trim. 28
12. FULL OPERATING CHECKS 28
12.1 Check the control settings. 28
12.1.1 Lighting the burner. 28
12.1.2 Operating the burner. 29
13. FASCIA AND FIREFRONT INSTALLATION 29
13.1 Fitting a firefront that has not been supplied with the fire. 29
13.2 Fitting the magnetic three piece fascia trim. 30
13.3 Fitting the Blenheim firefront. 30
13.4 Fitting the Seattle/Siva firefront. 30
14. SPILLAGE AND FLA E SUPERVISION CHECKS 32
14.1 Check for spillage. 32
14.2 Flame supervision and spillage monitoring system. 32
15. FINAL REVIEW 33
16. SERVICING AND PARTS REPLACE ENT 34
16.1 Checking the aeration setting of the burner. 35
16.2 To remove the burner unit. 35
16.3 To remove the pilot unit. 36
16.4 To remove the gas valve. 36
16.5 To remove the burner. 37
16.6 To remove the main burner injector. 37
16.7 To remove the appliance from the fireplace. 37
16.8 To remove the magnetic three piece fascia. 37
Page 6
© GDC Group Ltd 2014
NSTALLER GU DE
1. I AGES
Page 7
© GDC Group Ltd 2014
NSTALLER GU DE
Blenheim
Whitsbury
Seattle
Siva
2. SAFETY
Installer
Before continuing any further with the installation of this appliance please read the
following guide to manual handling:
-The lifting weight of the appliance heat engine and hotbox is 4.4 kg. This does
not include fascia or ceramics.
-One person should be sufficient to lift the fire. f for any reason this weight is
considered too heavy then obtain assistance.
-When lifting always keep your back straight. Bend your legs and not your back.
-Avoid twisting at the waist. t is better to reposition your feet.
-Avoid upper body/top heavy bending. Do not lean forward or sideways whilst
handling the fire.
-Always grip with the palm of the hand. Do not use the tips of fingers for support.
-Always keep the fire as close to the body as possible. This will minimise the
cantilever action.
-Use gloves to provide additional grip.
-Always use assistance if required.
-This product uses fuel effect pieces and a burner compartment rear wall
containing Refractory Ceramic Fibres (RCF), which are man-made vitreous
silicate fibres. Excessive exposure to these materials may cause irritation to
eyes, skin and respiratory tract. Consequently, it is important to take care
when handling these articles to ensure that the release of dust is kept to a
minimum. To ensure that the release of fibres from these RCF articles is kept
to a minimum, during installation and servicing we recommend that you use
a HEPA filtered vacuum to remove any dust and soot accumulated in and
around the fire before and after working on the fire. When replacing these
articles we recommend that the replaced items are not broken up, but are
sealed within a heavy duty polythene bag, clearly labelled as RCF waste. RCF
waste is classed as a stable, non-reactive hazardous waste and may be
disposed at a landfill licensed to accept such waste. Protective clothing is
not required when handling these articles, but we recommend you follow the
normal hygiene rules of not smoking, eating or drinking in the work area and
always wash your hands before eating or drinking.
-This appliance does not contain any component manufactured from asbestos
or asbestos related products.
Page 8
© GDC Group Ltd 2014
NSTALLER GU DE
3. APPLIANCE DATA AND EFFICIENCY
3.1 General information.
* When converted using Kit 0595221.
The appliance information label is located on a plate at the base of the fire. This can
be seen by removing the firefront.
3.2 Efficiency.
The efficiency of this appliance has been measured as specified in BS 7977 - 1 and
the result is as below :
odel Efficiency % (Gross) Efficiency % (Net)
956 51 56
956 when converted to LPG 52 56
The gross calorific value of the fuel has been used for this efficiency calculation. The
test data from which it has been calculated has been certified by Advantica
Certification services (0087). The efficiency value may be used in the UK
Government's Standard Assessment Procedure (SAP) for energy rating of dwellings.
Page 9
© GDC Group Ltd 2014
NSTALLER GU DE
Gas Natural (G20) Propane (G31) *
nlet Pressure 20mbar 37mbar
nput - Max. (Gross) 6.0kW (20,500Btu/h) 6.1kW (20,800Btu/h)
nput - Min. (Gross) 2.3kW (7,850Btu/h) 3.8kW (12,965Btu/h)
nput - Max. (Net) 5.4kW (18427Btu/h) 5.61kW (19147Btu/h)
nput - Min. (Net) 2.07kW (7063Btu/h) 3.50kW (11928Btu/h)
nlet Test Pressure (Cold) 20.0 ± 1.0mbar
(8.0 ± 0.4in w.g.)
37.0 ± 1.0 mbar
(14.85 ± 0.4in w.g.)
Gas Connection 8mm pipe 8mm pipe
Burner njector Cat 82 - 069 Size 128
Pilot & Atmosphere Sensing
Device
Copreci Ref. O.D.S
21500/166
Copreci Ref. O.D.S
21500/166 Fitted with RBM
180 - 02 injector
gnition Piezo Electric. ntegral with
Gas Tap
Piezo Electric. ntegral with
Gas Tap
Aeration Factory set Non-adjustable
The conversion of net efficiency to gross was achieved by multiplying the net
efficiency by the following conversion factor from Table E3 of SAP 2005, rounding
down to the nearest whole number.
4. GENERAL INSTALLATION REQUIRE ENTS
4.1 Regulations, Standards and Law.
The installation must be in accordance with these instructions.
For the user’s protection, in the United Kingdom it is the law that all gas appliances
are installed by competent persons in accordance with the current edition of the Gas
Safety ( nstallation and Use) Regulations. Failure to install the appliance correctly
could lead to prosecution. GAS SAFE REG STER and CORG require their members
to work to recognised standards.
n the United Kingdom the installation must also be in accordance with:
All the relevant parts of local regulations.
All relevant codes of practice.
The relevant parts of the current editions of the following British Standards:-
BS EN 1856 Part 1 - Chimneys - Requirements for metal chimneys.
BS 715 - Specification for metal flue boxes for gas-fired appliances not
exceeding 20kW.
BS EN 1858 - Chimneys - Components - Concrete flue blocks.
BS EN 1806 - Chimneys - Clay / ceramic flue blocks.
BS 5440 Part 1 - nstallation of flues.
BS 5440 Part 2 - nstallation and maintenance of flues and ventilation for gas
appliances of rated input not exceeding 70 kW net (1st, 2nd
and 3rd family gases).
BS 6461 Part 1 - Masonry chimney & flues - nstallation
BS 1251 - Fireplace components
BS 5871 Part 2 - nstallation - nset LFE gas fires
BS 6891 - Gas pipework installation
-n England and Wales, the current edition of the Building Regulations issued by the
Department of the Environment and the Welsh Office.
-n Scotland, the current edition of the Building Standards (Scotland) Regulations
issued by the Scottish Executive.
-n Northern reland, the current edition of the Building regulations (Northern reland)
issued by the Department of the Environment for Northern reland.
Page 10
© GDC Group Ltd 2014
NSTALLER GU DE
Gas Conversion factor from net to gross efficiency
Natural Gas 0.901
LPG 0.921
Tabla de contenidos
Otros manuales de Chimenea de interior de Valor
Valor
Valor 700JN Manual de usuario
Valor
Valor BR417 VA Manual de usuario
Valor
Valor ULTIMATE TURBOCHIM 517SF Instrucciones de montaje
Valor
Valor Retrofire RF24IDN Instrucciones de instalación
Valor
Valor G3 Classic Instrucciones de funcionamiento
Valor
Valor PORTRAIT 539 Instrucciones de instalación
Valor
Valor L1 1600KN Manual de usuario
Valor
Valor 530 536CXB Manual de instalación y operación
Valor
Valor 534AN Instrucciones de instalación
Valor
Valor CHURCHILL 32-810-58 Instrucciones de montaje
Valor
Valor HORIZON 534XAN Manual
Valor
Valor 1440 Manual de usuario
Valor
Valor 961 Manual de instrucciones
Valor
Valor ALPHA 647 Manual de usuario
Valor
Valor 1200EAN Instrucciones de funcionamiento y mantenimiento
Valor
Valor LEGEND G3 738JN Instrucciones de funcionamiento
Valor
Valor L1 Series Instrucciones de funcionamiento
Valor
Valor StoneFire SFMK01 Manual de usuario
Valor
Valor 785ILNV2 Instrucciones de instalación
Valor
Valor Bauhaus 32-032-60 Manual de usuario
