Valor Fires 754 Instrucciones de uso

5113454/04

Model754

INSET LIVE FUEL EFFECT GAS FIRE

Fitted with an

Arturafascia

(GC No. 32-032-59)

We trust that this guide gives

sufficient details to enable this

appliance to be installed and

maintained satisfactorily. However, if

further information is required, our

Valor Fires Technical Helpline will

be pleased to help.

Telephone 0844 8711 565 (National

call rates apply in the United

Kingdom).

In the Republic of Ireland

Telephone 0044 844 8711 565.

INSTALLER: Please leave this guide with the

owner

INSTALLER AND OWNER GUIDE

(including photocopying), stored in any medium by electronic means (including in any

retrieval system or database) or transmitted, in any form or by any means, whether

electronic, mechanical, recording or otherwise, without the prior written permission of

the copyright owner.

Applications for the copyright owner's permission to reproduce any part of this

publication should be made, giving details of the proposed use, to the following

address: The Company Secretary, Baxi Heating UK Limited, The Wyvern Business

Park, Stanier Way, Derby, DE21 6BF.

Warning: Any person who does any unauthorised act in relation to a copyright work

may be liable to criminal prosecution and civil claims for damages.

Valor Fires, Erdington, Birmingham B24 9QP

www.firesandstoves.co.uk

Because our policy is one of constant development and improvement, details may vary slightly from

those given in this publication

Page 2

INSTALLER GUIDE

THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20).

UNDER NO CIRCUMSTANCES IS THIS FIRE TO BE CONVERTED TO LPG.

AN LPG KIT DOES NOT EXIST FOR THIS GAS FIRE.

THIS APPLIANCE IS SUITABLE ONLY FOR INSTALLATION IN THE UNITED

KINGDOM (GB) AND THE REPUBLIC OF IRELAND (IE).

Safety First.

Valor Fires fires are CE Approved and designed to meet the appropriate British

Standards and Safety Marks.

Quality and Excellence.

All Valor Fires fires are manufactured to the highest standards of quality and

excellence and are manufactured under a BS EN ISO 9001 quality system accepted

by the British Standards Institute.

The Highest Standards

Valor Fires is a member of SBGI and HHIC (Heating and Hot water Industry Council)

that work to ensure high standards of safety, quality and performance.

Careful Installation

Valor Fires is a CORGI registered company. All our gas fires must be

installed by a competent CORGI Registered Installer in accordance

with our Installer Guide and should not be fitted directly on to a

carpet or floor of combustible material.

Page 3

INSTALLER GUIDE

Page 4

INSTALLER GUIDE

INSTALLERGUIDE

FOR OWNER GUIDE SEE PAGES 34 TO 47

CONTENTS

Section Heading Page

INSTALLER GUIDE 4 - 33

OWNER GUIDE 34 - 47

1. SAFETY 6

2. ACCESSORY LIST 6

3. APPLIANCE DATA 7

4. GENERAL INSTALLATION REQUIREMENTS 8

5. PACK CONTENTS 15

6. FIREPLACE CHECK 17

7. IGNITION CHECK 18

8. GAS SUPPLY CONNECTION 18

9. PREPARING APPLIANCE FOR INSTALLATION 19

10. HOTBOX INSTALLATION 22

11. BURNER & SUPPLY PIPE INSTALLATION 24

11.1 Fitting the burner. 24

11.2 Supply pipe installation. 24

11.3 Preliminary burner checks. 24

11.4 Check inlet pressure. 25

12. FASCIA INSTALLATION 26

13. FITTING THE CERAMIC FUEL EFFECT 26

14. FULL OPERATING CHECKS 27

14.1 Check the control settings. 27

14.2 Check for spillage. 27

15. FINAL REVIEW 29

16. SERVICING & PARTS REPLACEMENT 30

16.1 To remove the fascia. 30

16.2 To remove the burner unit. 31

16.3 To remove the pilot unit. 31

16.4 To remove the gas valve. 31

16.5 To remove the piezo generator. 32

16.6 To grease the control tap. 32

16.7 To replace the burner. 32

16.8 To remove the main burner injector. 33

16.9 To remove the appliance from the fireplace. 33

Page 5

INSTALLER GUIDE

1. SAFETY

Installer

Before continuing any further with the installation of this appliance please read the

following guide to manual handling:

! The lifting weight (kg) of this appliance is as below:

Heat engine Casting Fascia Total

6.80 3.84 3.00 13.64

! One person should be sufficient to lift the fire. If for any reason this weight is

considered too heavy then obtain assistance.

When lifting always keep your back straight. Bend your legs and not your back.

! Avoid twisting at the waist. It is better to reposition your feet.

Avoid upper body/top heavy bending. Do not lean forward or sideways whilst

handling the fire.

Always grip with the palm of the hand. Do not use the tips of fingers for support.

! Always keep the fire as close to the body as possible. This will minimise the

cantilever action.

! Use gloves to provide additional grip.

! Always use assistance if required.

2. ACCESSORY LIST

The following accessories are available: -

Description Part Number

Pre cast and clay flue block spacer kit 05654K1

Page 6

INSTALLER GUIDE

3. APPLIANCE DATA

Under no circumstances is this fire to be converted to LPG. An LPG conversion kit

does not exist for this gas fire.

The appliance information label is located on a plate at the base of the fire. This can

be seen by lifting the bottom front cover of the fascia - See figure 5

on the last page

of the owner guide.

This product uses fuel effect pieces containing Refractory Ceramic Fibres

(RCF), which are man-made vitreous silicate fibres. Excessive exposure to

these materials may cause irritation to eyes, skin and respiratory tract.

Consequently, it is important to take care when handling these articles to

ensure that the release of dust is kept to a minimum. To ensure that the release

of fibres from these RCF articles is kept to a minimum, during installation and

servicing we recommend that you use a HEPA filtered vacuum to remove any

dust and soot accumulated in and around the fire before and after working on

the fire. When replacing these articles we recommend that the replaced items

are not broken up, but are sealed within a heavy duty polythene bag, clearly

labelled as RCF waste. RCF waste is classed as a stable, non-reactive

hazardous waste and may be disposed at a landfill licensed to accept such

waste. Protective clothing is not required when handling these articles, but we

recommend you follow the normal hygiene rules of not smoking, eating or

drinking in the work area and always wash your hands before eating or

drinking.

This appliance does not contain any component manufactured from asbestos or

asbestos related products.

Page 7

INSTALLER GUIDE

Gas Natural (G20)

Inlet Pressure 20mbar

Input Max. (Gross) 5.1kW (17,400 Btu/h)

Input Min. (Gross) 3.0kW (10,236 Btu/h)

Inlet Test Pressure (Cold) 20.0 ± 1.0mbar (8.0 ± 0.4in w.g.)

Gas Connection 8mm pipe

Burner Injector Stereomatic Cat. 82 Size 065

Pilot & Atmosphere Sensing Device Copreci Ref. O.D.S 21500/166

Ignition

Integral piezo (Mounted on gas valve)

Aeration Non-adjustable

The efficiency of this appliance has been measured as specified in BS 7977 - 1 and

the result is as below :

Model

Efficiency % (Gross)

754 Artura 51

The gross calorific value of the fuel has been used for this efficiency calculation. The

test data from which it has been calculated has been certified by Advantica

Certification services (0087). The efficiency value may be used in the UK

Government's Standard Assessment Procedure (SAP) for energy rating of dwellings.

The convertion of net efficiency to gross was achieved by multiplying the net

efficiency by the following conversion factor from Table E3 of SAP 2005, rounding

down to the nearest whole number.

4. GENERAL INSTALLATION REQUIREMENTS

4.1 The installation must be in accordance with these instructions.

For the user’s protection, in the United Kingdom it is the law that all gas appliances

are installed by competent persons in accordance with the current edition of the Gas

Safety (Installation and Use) Regulations. Failure to install the appliance correctly

could lead to prosecution. CORGI requires its members to work to recognised

standards.

In the United Kingdom the installation must also be in accordance with:

All the relevant parts of local regulations.

All relevant codes of practice.

The relevant parts of the current editions of the following British Standards:-

BS 715

BS EN 1856 Part 1

BS 1251

BS EN 1858 which replaces BS 1289 Part 1

BS EN 1806 which replaces BS 1289 Part 2

BS EN 1856 Part 1 which replaces BS 4543 Part 2

BS 5440 Part 1

BS 5440 Part 2

BS 5871 Part 2

BS 6461 Part 1

BS 6891

BS 8303

In England and Wales, the current edition of the Building Regulations issued by the

Department of the Environment and the Welsh Office

Page 8

INSTALLER GUIDE

Gas Conversion factor from net to gross efficiency

Natural Gas 0.901

In Scotland, the current edition of the Building Standards (Scotland) Regulations

issued by the Scottish Executive.

In Northern Ireland, the current edition of the Building regulations (Northern Ireland)

issued by the Department of

the Environment for Northern Ireland.

In the republic of Ireland the installation must also conform to the relevant parts of:

a) The current edition of IS 813 “Domestic gas installations”

b) All relevant national and local rules in force.

Where no specific instructions are given, reference should be made to the relevant

British Standard Code of Practice.

4.2 In the United Kingdom, as supplied, the appliance can be installed in the

following

situations: -

4.2.1 To a fireplace complete with surround and hearth as shown in figure 1 and

complying with BS1251 after removal of the fireback and sufficient material behind the

fireback for a debris catchment space. The required fireplace, hearth, debris

catchment area and clearance dimensions are shown in figure 1.

4.2.2 ‘Hole-in-the-wall’ installations.

It is recommended that a

hearth should be installed

as in figure 1.

If a hearth is not fitted, the

fire must be installed so

that the distance from the

base of the fireplace

opening in the wall to the

finished floor level is at

least 85mm.Where there

is no floor covering or

carpet and the floor is of a

type that is likely to be

covered in such a way

then the distance from the

base of the fireplace

opening in the wall to the

finished floor level should

be increased to at least

160mm. The minimum

shelf height will have to be taken from the base of the fireplace opening.

To protect from the risk of burns and ignition of clothing a tactile separator shall be

used. The hearth detailed in section 4.9 meets the requirements for a tactile

separator. If this is not used then a 672mm long fender, kerb, horizontal bar, or other

barrier, being fixed not less than 50mm above floor level and positioned 300mm in

Page 9

INSTALLER GUIDE

Figure 1. Hearth and fireplace opening dimensions

front of the fixing plane of the fire will

meet the requirement.

4.2.3 To a fireplace incorporating a

metal flue box complying with the

constructional requirements of the

current edition of BS715. The

dimensions of the flue box must

conform to those shown in figure 2.

4.2.4 A precast concrete or clay flue

block system conforming to BS1289

or BS EN 1806 with dimensions as

in figure 3 or using a 05654K1

spacer kit. (Installation Instructions

part number 3003095). The current

versions of BS1289 and BS EN

1806 recommend that there should

be an air space or insulation

between the flue blocks and the

plaster because heat transfer may

cause cracking on directly

plastered flues. However, generally

this appliance is suitable for

installations under all

circumstances unless there is a

history of cracking problems.

Remember that faults such as

cracking may be caused by poorly

built and restrictive flues, e.g.

mortar extrusions, too many bends,

flue heights below three metres,

restrictive terminations etc (See

figure 3).

4.2.5 If the fireplace opening is

greater than the acceptable

dimensions given in this guide, do

not use the back of a fire surround

or marble to reduce the opening.

This may cause cracking of the

surround back or marble.

Page 10

INSTALLER GUIDE

Figure 3. Precast or clay flue block system

dimensions

Figure 2. Metal flue box

Tabla de contenidos

Otros manuales de Chimenea de interior de Valor Fires

Valor Fires

Valor Fires 961 Homeflame Dream Manual de instrucciones

Valor Fires

Valor Fires 541 Instrucciones de uso

Valor Fires

Valor Fires 347 Manual de instrucciones

Valor Fires

Valor Fires 541 Camden Instrucciones de uso

Valor Fires

Valor Fires 942 Instrucciones de uso

Valor Fires

Valor Fires 762 Instrucciones de uso

Valor Fires

Valor Fires 752 Instrucciones de uso

Valor Fires

Valor Fires 752 Instrucciones de uso

Valor Fires

Valor Fires Artura 958 Instrucciones de uso

Valor Fires

Valor Fires 347 Brava 4 Oxysafe Manual de instrucciones

Valor Fires

Valor Fires 844 Instrucciones de uso

Valor Fires

Valor Fires 473 Black Beauty Unigas II Manual de instrucciones

Valor Fires

Valor Fires 341 black beauty slimline Manual de instrucciones

Valor Fires

Valor Fires 762 Instrucciones de uso

Valor Fires

Valor Fires 339 Heartbeat Oxysafe 2 Instrucciones de uso

Valor Fires

Valor Fires Artura 958 Manual de instrucciones

Valor Fires

Valor Fires 762 Instrucciones de uso

Valor Fires

Valor Fires 541 Chic Instrucciones de uso

Valor Fires

Valor Fires 756 Instrucciones de uso

Valor Fires

Valor Fires 349 Manual de instrucciones

Valor Fires

Valor Fires 348 Brava Manual de instrucciones

Valor Fires

Valor Fires 752 Instrucciones de uso

Valor Fires

Valor Fires 761 Manual de instrucciones

Valor Fires

Valor Fires 963 Instrucciones de uso

Manuales populares de Chimenea de interior de otras marcas

Brigantia

Brigantia 35-DVRS31N-2 Manual del propietario

Nordpeis

Nordpeis Bergen Manual de usuario

Superior

Superior BCT2536TMN Manual de usuario

Quadra-Fire

Quadra-Fire 5100I-GD-B Manual de usuario

Renaissance

Renaissance RUMFORD 1000 Manual de usuario

Lacunza

Lacunza IV-800 Manual de usuario

Baxi

Baxi 940 Instrucciones de uso

Dru

Dru Maestro 60/2 Tall RCH Manual de usuario

Diamond Fireglass

Diamond Fireglass SS-O22 Manual de usuario

HearthStone

HearthStone Windsor Bay 8830 Manual de programación

Napoleon

Napoleon ASCENT B42 Manual de usuario

Enviro

Enviro E33GI Manual de usuario

Smeg

Smeg L30 FABE Instrucciones de montaje

KEDDY

KEDDY K700 Manual de usuario

Godin

Godin 3451 Manual de usuario

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Manual de usuario

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 Manual de usuario

Desa

Desa CCFPDFT Manual de operación