V-tech KidiMagic Instrucciones de montaje
Parent’s Guide
91-003111-011 US
CAUTION-ELECTRIC TOY: Not recommended for
children under 3 years of age. As with all electric products,
precautions should be observed during handling and use
to prevent electric shock.
3
3
INTRODUCTION
Thank you for purchasing the Kidi Magic Speaker ClockTM.
This silly, fortune-telling alarm clock features soothing lighting that
changes color! Tune in to your favorite radio station with the FM radio or
plug in an external music player to listen to your own music. There are
also relaxing melodies with soft lighting, creating a peaceful atmosphere.
Change the color of the light and control the games by moving your hand
above the magic sensors!
INCLUDED IN THIS PACKAGE
•One Kidi Magic Speaker ClockTM
•One 3.5mm jack audio cable
•One VTech®5.5mm DC 7.5V power adapter
•One parent’s guide
WARNING:
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties and packaging screws are not part of this toy,
and should be discarded for your child’s safety.
NOTE: Please keep this parent’s guide as it contains important
information.
ATTENTION :
Pour la sécurité de votre enfant, débarrassez-vous de tous les produits
d’emballage tels que rubans adhésifs, feuilles de plastique, attaches,
étiquettes et vis d’emballage. Ils ne font pas partie du jouet.
NOTE : Il est conseillé de conserver ce guide des parents car il comporte
des informations importantes.
The toy is only to be connected to equipment of Class II (marked on the
marking plate with a symbol.)
Turn the packaging lock
counterclockwise several times.
Pull out and discard the packaging lock.
Unlock the packaging locks:
4
4
PRODUCT FEATURES
PRODUCT LAYOUT AND BUTTONS
Screen Icons
Indicate the current status of each mode.
Music Mode Games FM Radio
Audio-In Alarm 1 Alarm 2
Magic
Sensor
Projection Angle
Adjuster
Magic Sensor
OK Button
Time Projection
Button
Alarm/Settings
Direction Button
Volume
Radio
Projector
Lens
Projector
Focus Ring
Magic Sensor
Direction Button
Clock
Light
Music
Games
5
5
Button Descriptions
Clock
Press this button to enter Clock Mode or to go to Sleep Mode.
When the clock is not in use, Sleep Mode will activate to save power.
Music
Press this button to enter Music Mode or exit to Clock Mode.
If an external music player (not included) is connected, press this button
to play music from that device.
FM Radio
Press this button to enter FM radio.
Games
Press this button to choose a game.
Alarm/Settings
Press this button to change any settings or to set the alarm.
Light
•Press this button to change to a different light mode.
•Hold this button to change the light color.
Volume
Press this button to adjust the volume.
Direction Buttons
Press these buttons to make a selection.
OK Button
Press this button to conrm your selection.
When in Clock Mode, press the OK button to hear the current time.
Time Projection Button
Press the big Time Projection Button on top to turn the time projection
ON or OFF.
Projector Focus Ring
Turn this to adjust the focus of the time projection.
6
6
Note:
We recommend using the time projection feature in a dimly lit room to
get the best results.
Projection Angle Adjuster
Adjust the projection angle by rotating the adjuster.
Note:
When adjusting the projector focus or angle, please be aware of the
Time Projection Button as it is easy to accidentally press it.
Magic Sensor
Wave your hand above the Magic Sensor to see magic effects. Works
only when is shown on the screen.
WARNING
•Please keep your Kidi Magic Speaker ClockTM away from strong
light or direct sunlight; it will interfere with the Magic Sensors.
•To avoid poor operation, please ensure there are no obstacles, such
as a shelf, close to the top of the unit and that it’s not too close to a
wall.
•If the sensor detects an obstacle that impedes the performance of
the unit, you will see a warning icon on the screen.
SPECIAL WARNING ICONS
Low Battery This icon will appear when the battery
power is low. Please replace the batteries.
Bad Signal
This animation will display when an
object is within the sensor range for an
extended period of time and reduces the
performance.
Audio-In Jack
Plug in an external music player (not included) using the supplied
audio cable to listen to music.
7
7
AC/DC Jack
Plug in a VTech®7.5V DC power adapter here.
FM Radio Antenna
To get the best radio reception, please take out the FM Radio antenna
that is located in the cabinet at the bottom of the unit.
GETTING STARTED
BATTERY INSTALLATION
Kidi Magic Speaker ClockTM uses 4 AA size batteries or a
VTech®7.5V adapter.
•Locate the base compartment cover at the bottom of the unit.
•Remove the base compartment cover.
•Locate the battery cover inside the base compartment.
•Remove the battery cover and install 4 AA size batteries as illustrated.
•Close the battery cover and the base compartment cover.
8
8
BATTERY NOTICE
•Use new alkaline batteries for maximum performance.
•Use only batteries of the same or equivalent type as recommended.
•Do not mix different types of batteries: alkaline, standard (carbon-zinc)
or rechargeable, or new and used batteries.
•Do not use damaged batteries.
•Insert batteries with the correct polarity.
•Do not short-circuit the battery terminals.
•Remove exhausted batteries from the toy.
•Remove batteries during long periods of non-use.
• Do not dispose of batteries in re.
•Do not charge non-rechargeable batteries.
•Remove rechargeable batteries from the toy before charging (if
removable).
•Rechargeable batteries are only to be charged under adult supervision.
POWER ADAPTER CONNECTION
To connect the adapter to the unit, follow the instructions below.
•Make sure no batteries remain inside the unit.
•Locate the 5.5mm DC jack on the side of the unit.
•Connect the power adapter into the unit’s 5.5mm DC jack.
•Plug the other end of the power adapter into an electrical socket.
•Turn the unit ON.
TRANSFORMER SAFETY NOTICE
•Using a VTech®adapter (DC 7.5V) is recommended.
•This toy shall only be used with a transformer for toys.
•The transformer is not a toy.
9
9
•This toy is not intended for use by children under 3 years old.
•Do not connect this toy to more than the recommended number of
power supplies.
•Never clean a plugged in toy with liquid.
•Please regularly examine the transformer, checking for damage to
the cord, plug, transformer or other parts. Do not use the transformer
if there is any damage to it.
Note:
If the unit stops working or the sound becomes weak, it may be because
of a fault with the power adapter connection.
Unplug the adapter for 15 seconds. Then plug the adapter back in and
turn the unit ON. If the problem persists, the adapter you are using may
be faulty.
TO BEGIN USING THE
KIDI MAGIC SPEAKER CLOCK™
1. Initial Set-Up
Press any button to turn the unit on. When the unit is rst turned on, you
will be asked to set the time and date.
2. Time Set-Up
The default time is 08:00 in 24 hour mode.
•Press the OK Button to highlight the next item:
hours, minutes, AM/PM (only in 12-hour mode),
/ , 12/24 hr
•Press the / Direction Buttons to adjust the
value.
•To save the current settings, press the OK Button while
highlighting the check mark icon . Or you can press the /
Direction Buttons to choose the reset icon to reset the time and
to change it to 12-hour mode.
10
10
3. DATE SET-UP
The default date is 31/01/16 in DD/MM/YY format.
•Press the OK Button to highlight the next item:
day, month, year, / , date format (DD/MM/YY
or MM/DD/YY)
•Press the / Direction Buttons to adjust the value.
•To save the current settings, press the OK Button while highlighting
the check mark icon . Or you can press the / Direction
Buttons to choose the reset icon to reset the date or to be able
to select MM/DD/YY format.
FEATURES
1. Standby Mode
To preserve battery life, the Kidi Magic Speaker ClockTM will
automatically enter standby mode if there is no operation for a short
period of time. You can also press the Clock Button to go into standby
mode if you are already in Clock Mode. The
current time will display even in standby mode.
Press any button to wake the unit up.
2. Magic Sensor Control
The Magic Sensors detect hand movement
directly above them. Wave your hand above
the sensors to activate them. You can select
different light effects and play the games using
them.
The Magic Sensors are available only if the
Magic Sensor Icon is shown at the top of
the screen.
3. Light Control
Press the Light Button to switch between body
light on, screen light on only, lights off.
Hold this button for approximately 1-2 seconds to enter
the advanced light settings.
Left and right
motion
Otros manuales para KidiMagic
1
Tabla de contenidos
Otros manuales de Reloj de V-tech
Manuales populares de Reloj de otras marcas
Silicon Laboratories
Silicon Laboratories SI5324 Manual de usuario
Heathkit
Heathkit GC-1005 Manual de usuario
Oregon Scientific
Oregon Scientific PRYSMA RMR221P Manual de usuario
Andrew O'Malley
Andrew O'Malley DOTKLOK Manual de usuario
ALGE-Timing
ALGE-Timing ASC3 Manual de usuario
Bodet
Bodet Profil 960 Manual de usuario
