UTICOR MI-17 Manual de usuario
Manual
Monitor MI-17
Page 2
Contents:
Page
1 General 4
2 Technical data 5
3 Power Supply 6
3 1 Monitor with 12 VDC power supply
3 2 Monitor with 24 VDC power supply
3 3 Monitor with 230 VAC power supply
4 Backside Monitor 7
5 OSD Menu 7
5 1 Picture 8
Adjust of the backlight
Adjust the brightness
Contrast setting
Adjust the Sharpness
5 2 Display 9
Optimal picture adjustment
H position
V position
Pixel clock
Phase
5 3 Color 10
Gamma value
Color Temp
Color Effect
Color Demo
Color Format
Hue
Saturation
5 4 Advance 11
Aspect Ratio
Overscan
DDCCI
Ultra Vivid
5 5 Input 12
VGA / DVI / DP
5 6 Other 13
Reset
Menu Time
OSD H Position
OSD V Position
Language
Transparency
Rotate
5 7 Information 14
Contents:
Page
6 Touch Screen 15
7 Monitor care 16
8
8 Screensaver 16
9 security 16
10 Mechanical dimensions 17
10 1 Monitor with Standard or Stainless Steel Front Plate 17
10 2 Monitor with 19“ Front Plate
11 Front panel cutout monitor with 18
Standard or stainless steel front plate
Notes 19
Page 3
1 - General
The monitor has a 17 "TFT display with
a resolution of 1280 x
1024 pixels
The connection to the PC takes place
via a VGA interface with 15-pin VGA
plug or via a DVI interface with DVI-I
Dual Link plug (24 + 1 pin) or the dis-
play port for the transmission of digital
image signals
Optionally, the monitor can be equipped
with a resistive touch screen The touch
has a USB interface
Monitor with 19“ Front Plate, RAL 9006
If the monitor is equipped without a touch, the display is protected against contact and contact
with moisture and aggressive substances through a glass There is a standard protective glass
and a visually anti-glare protective glass available
The monitor is available with a standard or stainless steel front plate and mounting bolts on the
back These two versions are intended for installation in a control cabinet or control panel The
front panel has a gasket The degree of protection is IP 65
The monitor with 19 "front panel has 4 mounting holes on both sides and is installed in a 19"
rack
Page
Monitor Back with standard front plate
and mounting bolts
The monitors have a standard 12 VDC
power supply and are supplied with an
external 230 VAC / 12 VDC power
supply All monitors are optional with a
supply voltage of 24 VDC or with an in-
ternal power supply of 230 VAC
available
2 - Technical specifications
Page 5
Reserve technical changes
Technical specifications
LCD - Type 17“ TFT
resolution (Pixel) 1280 x 1024
act. screen area(mm) 337,9 x 270,3
pixel density (mm) 0,264 x 0,264
brightness (cd / m²) 350
contrast 1000 : 1
reaction time TR/TF (msec.) 3,5 / 1,5
Colors 16,7 Mio
Angle of view horizontally
vertical
R / L = 85° / 85°
O / U = 80° / 80°
Lifetime illumination
(half-life)
LED backlight / 50,000 hours
Touch (Option) Analog resistive touch
with USB interface
VGA Port SXGA
DVI Port DVI D Dual Link (24 + 1 Pin connector)
DP Port Display Port (digital image signals)
OSD - Menü Yes
supply voltage 12 VDC
optional 24 VDC (intern)
optional 100 - 230 VAC (intern)
power consumption 40 W
operating temperatur 0 to 50 °C
storage temperature -25 to60 °C
Front Plate Front panel black powder coated, RAL 9005, with
fixing bolts
Stainless steel front plate with mounting bolts
Front panel for 19 "installation, RAL 9006
Degree of protection front panel IP 65 (Stainless steel and standard front)
VESA connection No
weight 7,5 KG
3 - Power supply
Page 6
3.1 Monitor with 12 VDC power supply
The connector is located on the back of the monitor
The inner pin is plus, the outer minus
The inner plug has a diameter of 2 5 mm
An external power supply unit with a supply voltage of 100 -
240 VAC / 12 VDC and 60 VA output is included in this ver-
sion
-
Attention: pay attention to polarity
3.2 Monitor with 2 VDC power supply
On the back there is a 3-pin screw terminal connection
The supply voltage is 20 - 28 VDC
The power consumption is about 40 watts
GND
- MINUS
+ PLUS
2 VDC
External power supply unit 230 VAC / 12 VDC
3.3 Monitor with 230 VAC power supply
On the back there is a 3-pin screw terminal connection
The supply voltage is 100 - 230 VAC
The power consumption is about 40 watts
100 - 230 VAC
GND
L2
L1
Page 7
On the back of the monitor is the power supply connector, the VGA input, the DVI input, the DP
connector, the connector on the Touch if the monitor is equipped with a touch screen, and 5
buttons for adjusting the OSD menu
Die Tasten sind bezeichnet mit:
- Monitor Back
Button OSD menu on the back of the monitor
POWER:
Monitor on / off
MENU:
Enable and disable the OSD menu
SELECT:
Confirm selection in OSD main menu or OSD submenu
DOWN:
Selection of icons in the main and submenu as well as setting the values
The value to be set is lowered
UP:
Selection of icons in the main and submenu as well as setting the values
The value to be set is increased
5 - OSD Menü
After pressing the MENU button, the OSD menu is displayed as shown in the lower picture
Then you can use the UP / DOWN buttons to select the various main menus By pressing the
SELECT key, the selected main menu with the associated submenu items is selected and the
submenu items can be selected using the UP / DOWN keys These are also acknowledged
with the SELECT key
Then select the desired value with the UP / DOWN keys and confirm with SELECT Exit vari-
ous menu items by pressing the MENU key
Attention: The OSD menu can only be activated when the input signal is present!
Page 8
5.1 Picture
Backlight: Adjustment of the backlight
Brightness: Adjust the brightness
Contrast: Contrast adjustment
Sharpness: Adjust the focus
Page 9
5.2 Display
Auto Adjustment: The optimal picture setting is activated
H Position: The horizontal position can be adjusted
V Position: The vertical position can be adjusted
Pixel Clock: The clock frequency can be adjusted
Phase: The clock rate can be adjusted
Page 10
5.3 Color
Gamma: The gamma value can be adjusted
Color Temp : The color temperature can be adjusted
Color Effect: A color effect can be set
Color Demo: Selection for hue and saturation
Color Format: Color space selection
Hue: Adjust the color balance
Saturation: Adjust the saturation
Tabla de contenidos
Otros manuales de Monitor de UTICOR
