US Robotics USR1120 Manual de usuario

R24.0270.00

11 Mbps Wireless USB Adapter

Note: For the most updated information, visit: http://www.usr.com/

support. You can also refer to the Companion Reference Guide and to

the User Guide on the U.S. Robotics Installation CD-ROM for more

information.

Prepare for installation

Turn on your desktop or laptop computer. Type your password if you are

prompted to do so.

Make sure you have an available USB port on your computer.

Note: Your product number is 1120. It is very important that you have

your serial number written down before you install the 11 Mbps

Wireless USB Adapter. If you ever need to call our Technical Support

department, you will need this number to receive assistance.

Serial Number

Note: Be sure to find out what letter your CD-ROM drive uses before

you begin installing your new product. You will need to know this to

properly install your software.

Install your software

Attention! You will need to install this software on all the PCs or

laptops you plan to wirelessly network together using wireless USB

devices.

Insert your U.S. Robotics Installation CD-ROM into your CD-ROM drive.

Note: If the Choose Setup Language window appears, select your

preferred language and click OK.

Note: If your CD-ROM does not automatically launch, click Windows

Start, Run, and type D:\setup (or the appropriate letter of your CD-

ROM drive) and click OK.

Some files will be copied to your system, and then you will be asked to read the

license agreement. Read the agreement and click Yes.

The Installation CD Graphic User Interface (GUI) will appear on your screen.

Click Software.

Click Install Wireless Adapter Configuration Utility. Follow the on-screen

instructions and wait for some files to be copied to your hard drive.

You will be prompted to select your Wireless Mode. Select Infrastructure Mode

if you will be using a Wireless Access Point. Select 802.11 Ad-Hoc Mode if you

will be in a peer-to-peer network. After you select your Wireless Mode, click

Next.

You will be prompted for an SSID. If you do not have an existing wireless

network, leave the default setting of ANY and click Next. If you have an existing

wireless network, enter the SSID and click Next.

Continue to follow the on-screen instructions to finish the installation

procedure. When you are prompted, select Yes, I want to restart my computer

now and click Finish.

Remove the Installation CD-ROM, reboot your computer, and prepare to install

your hardware.

Connect the 11 Mbps Wireless USB

Adapter to your computer

Plug the small end of the included USB cable into the USB port on the 11 Mbps

Wireless USB Adapter.

Locate an available USB port on your computer and insert the large rectangular

end of the included USB cable.

Note: Make sure the USB cable is fully inserted into the USB port on

your computer and to the USB port on the 11 Mbps Wireless USB

Adapter. Your computer will not detect the 11 Mbps Wireless USB

Adapter if the USB cable is loose on either end.

When Windows detects the new hardware, click Next.* Windows may need to

copy some files. Wait for any files to be copied.

After a few moments, all the necessary files will be copied and the installation

procedure will be complete. If you are prompted, click Finish.

Note: You may be prompted for your Windows Operating System CD-

ROM. Insert your Windows Operating System CD-ROM into the CD-ROM

drive. When Windows is finished copying files, remove the Windows

Operating System CD-ROM.

* A Digital Signature Not Found window may appear. Click Yes. Windows Me and

2000 will verify that your network device is properly installed.

Congratulations! You have finished installing your hardware and your

drivers! It is recommended that you reboot your machine. You will now see a

small icon for the Configuration Utility in the system tray by your clock.

The Configuration Utility is used to change or

verify the configuration information that

relates to your 11 Mbps Wireless USB Adapter.

The Configuration Utility icon will be colored

to indicate the status of your wireless

network: red for disconnected, yellow for

connected with weak quality, and green for

connected with good quality.

You must now configure each computer that has an 11 Mbps Wireless USB

Adapter in order to share Internet connectivity, files, and a printer. Refer to the

User Guide on the U.S. Robotics Installation CD for this information.

The 11 Mbps Wireless USB Adapters are set to Infrastructure/Auto Detect by

default. 802.11b Ad Hoc mode is used for peer-to-peer network configurations.

Infrastructure mode is used to add a Wireless Access Point to the wireless

network configuration. Each 11 Mbps Wireless USB Adapter in the wireless

network must have the correct mode selected within the Configuration Utility.

It is recommended that you take this opportunity to register your 11 Mbps

Wireless USB Adapter. Insert the Installation CD-ROM in the CD-ROM drive and

follow the on-screen instructions.

For troubleshooting and support information, refer to the Companion Reference

Guide, to the User Guide on the U.S. Robotics Installation CD-ROM, or to the U.S.

Robotics Website.

Printed in Taiwan

Otros manuales para USR1120

Tabla de contenidos

Otros manuales de Adaptador de US Robotics

US Robotics

US Robotics USR9620 Manual de usuario

US Robotics

US Robotics USR5422 Manual de usuario

US Robotics

US Robotics MAXg Manual de usuario

US Robotics

US Robotics 5426 Manual de usuario

US Robotics

US Robotics MAXg Manual de usuario

US Robotics

US Robotics USR997901 Manual de usuario

US Robotics

US Robotics USR9620 Manual de usuario

US Robotics

US Robotics USR5420 Manual de usuario

US Robotics

US Robotics USR1120 Manual de usuario

US Robotics

US Robotics 5412 Manual de usuario

US Robotics

US Robotics 5425 Manual de usuario

US Robotics

US Robotics USR5420 Manual de usuario

US Robotics

US Robotics USR5420 Manual de usuario

US Robotics

US Robotics MAXg Manual de usuario

US Robotics

US Robotics USR5446 Manual de usuario

US Robotics

US Robotics WN4501D Manual de usuario

US Robotics

US Robotics 3CP3468 Manual de usuario

US Robotics

US Robotics 5423 Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario