Ursalink AM100 Series Manual de usuario

Ursalink Ambiance Monitoring Sensor AM100

device to your Azure IoT services

Connect:

INTRODUCTION 2

PREREQUISITES 2

PRE-INSTALLATION 3

CONNECT A LORAWAN GATEWAY 3

CONNECT THE LORAWAN SENSOR 4

CONNECT YOUR DEVICES TO AZURE IOT HUB 5

CONNECT TO AZURE IOT CENTRAL 7

ADDITIONAL LINKS 9

Introduction

The AM100 is a compact indoor ambiance monitoring sensor including motion, humidity,

temperature, and light sensors. The AM100 is a battery powered device and is designed to be

wall mounted. It is equipped with NFC (Near Field Communication). Sensor data are

transmitted in real-time using standard LoRaWAN protocol. LoRaWAN enables encrypted radio

transmissions over long distance while consuming very little power.

IoT Plug and Play certified device simplifies the process of building devices without custom

device code. Using Solution builders can integrate quickly using the certified IoT Plug and Play

enabled device based on Azure IoT Central as well as third-party solutions.

This getting started guide provides step by step instruction on getting the device online within

minutes and feeding data into Azure IoT Hub, Azure IoT Central, Azure Events Hub, Azure

Storage, Power BI or any other 3rd party platform

Prerequisites

You should have the following items ready before beginning the process:

For Azure IoT Central

•Azure Account

•Azure IoT Central application

For Azure IoT Hub

•Azure IoT Hub Instance

•Azure IoT Hub Device Provisioning Service

•Azure IoT Public Model Repository

Additional Hardware & Software

Requirements

The Ursalink Ambiance Monitoring Sensor AM100 has both an additional hardware and

software dependency that are required in order to connect to Azure:

•To use this device, it must be connected to a LoRaWAN gateway

•To use this device, you must also use the IoT in a Box service from MyDevices

This device was tested with the following Azure Certified Device gateway:

https://devicecatalog.azure.com/devices/6a49a967-ec14-9894-32b4-9ac9ac9cc8fd

More information on how to configure the dependency hardware and software service is

below.

Pre-Installation

instantly set up your LoRaWAN gateways and devices and connect them to Azure IoT Central,

Azure Events Hub, Azure IOT Hub, Azure Service Bus, Azure Storage and Power BI as well as any

other 3rd party app or platform.

Set up your free account before adding gateways and sensors.

1. Open your browser and navigate to http://iotinabox.mydevices.com

2. Create your free account and get started.

Connect a LoRaWAN Gateway

You'll need a myDevices’ certified LoRaWAN gateway to connect your LoRa device to Azure.

These gateways are available directly from the gateway manufacturers, such as MultiTech,

Tektelic, Gemtek (aka Browan); or from Ingram Micro, myDevices.com or other distributors

around the world.

From the myDevices IoT in a Box App:

1. Select. Menu > Add Gateway

2. Scan QR Code to add gateways

Connect the LoRaWAN Sensor

From the myDevices IoT in a Box App: simply scan the QR code located on the back of the

device to the correct location.

1. Select. Menu > Add Device

2. Scan sensor into app and enter Name

Connect your Devices to Azure IOT Hub

From the myDevices’ IoT in a Box Application, go to the integrations tab and select the Azure

IoT Hub(PnP) option

Configure the each device(s) with the DPS credentials

Use the following instructions to have your IoT events sent to your Azure IoT Hub account.

1. https://iotinabox.zendesk.com/hc/en-us/articles/360048504933-Azure-IoT-Hub

https://youtu.be/YPtgjNge3IQ

Connect to Azure IoT Central

From the myDevices’ IoT in a Box Application, go to the integrations tab and select the select

the Azure IoT Central option

Easily integrate with Azure IoT Central and connect hundreds of devices. This integration

connects IoT Central with myDevices to create a device bridge and bringing the best of the two

platforms. Azure IoT Central is a hosted platform that simplifies setup of your IoT solution.

•ID scope: In your IoT Central application, navigate to Administration > Device

Connection. Make a note of the ID scope value.

•Group primary key: In your IoT Central application, navigate to Administration > Device

Connection > SAS-IoT-Devices. Make a note of the shared access signature Primary key

value.

Enter the DPS information that you previously obtained:

Use the Cloud Shell to generate a device specific key from the group SAS key you just retrieved

using the Azure CLI

az extension add --name azure-iot az iot central device compute-device-key --device-id sample-

device-01 --pk

Make a note of the generated device key, and the ID scope for this application and flash it on

the device

Additional Links

Please refer to the below link for additional information for Plug and Play

•Manage cloud device messaging with Azure-IoT-Explorer

•Import the Plug and Play model

•Configure to connect to IoT Hub

•How to use IoT Explorer to interact with the device

Otros manuales para AM100 Series

Tabla de contenidos

Otros manuales de Accesorios de Ursalink

Ursalink

Ursalink EM500 Series Manual de usuario

Ursalink

Ursalink AM100 Series Manual de usuario

Ursalink

Ursalink EM500-SMT Series Manual de usuario

Ursalink

Ursalink UC11-T1 Manual de usuario

Ursalink

Ursalink AM100 Series Manual de usuario

Ursalink

Ursalink EM500-PT100 Manual de usuario

Ursalink

Ursalink EM500-UDL Manual de usuario

Ursalink

Ursalink EM500-LGT Manual de usuario

Ursalink

Ursalink EM500-PP Manual de usuario

Ursalink

Ursalink EM500 Series Manual de usuario

Ursalink

Ursalink EM500-UDL Manual de usuario

Ursalink

Ursalink EM500-SMT Series Manual de usuario

Ursalink

Ursalink UC11-N1 Manual de usuario

Ursalink

Ursalink EM500-CO2 Manual de usuario

Ursalink

Ursalink UC11-N1 Manual de usuario

Ursalink

Ursalink EM500-SWL Manual de usuario

Ursalink

Ursalink EM500-PT100 Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario