URC MX-450 Instrucciones de funcionamiento
Congratulations!
You’ve purchased a unique synthesis of hardware and software engineering, the Complete Control MX-450. The MX-450 achieves a magnificent
combination of power and flexibility, simplifying and automating operation of even the most complex system.
MX-450 Owners Manual © 2011 Universal Remote Control, Inc.
The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written
consent from Universal Remote Control, Inc.
UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS
MANUAL.
The information in this manual may be subject to change without prior notice.
Complete Control is a registered trademark of Universal Remote Control, Inc.
All other brand or product names are trademarks or registered trademarks of their respective companies or organizations.
Universal Remote Control, Inc.
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
Table of Contents
Getting Started: Programming the MX-450
Standard Features
Optional Features
Tour: Navigating the MX-450
Overview: Setup Screen Overview
Basic Setup: Adding Devices
1
Basic Setup: Learn
2
Basic Setup: Delete Device & Review Code Set
3
Advanced Setup: Copy & Paste
4
Advanced Setup: One-Touch Activities (Macros)
5
Advanced Setup: Hide or Display Pages
6
Advanced Setup: Editing Labels
7
Advanced Setup: Erasing
8
Advanced Setup: RF Setup
9
Favorite Channels
10
Glossary
User Settings
11
Display Tips
12
Getting
Started Programming the MX-450
Audio:
Denon AVR-2811
TV:
Sony KD-7FS170
Cable:
AT-T Uverse
Make sure the batteries are
fresh/new.
For the best chance of success,
make sure you make a list of
the devices that you want to
control. This list should include
the manufacturer, the model
number of each device.
Decide on the position of
each device on the
remote’s page(s).
Once a device is placed in a
position, it may not be
changed and must be
deleted and recreated.
Unified Remote
Follow the steps in this guide to
program up to 20 remotes into
your new MX-450!
Instead of searching for the right
remote, it’ll be in your hand
already!
Backlit LCD Buttons
Pressing ANY button, or the
LIGHT button located on the right
side of the remote) and both the
screen and buttons illuminate!
Perfect for uninterrupted control,
even when the lights are low!
Intuitive Commands
Ensure that device pages contain
the commands necessary when
performing that activity.
For example, make sure that
when using the Cable TV page,
the volume buttons control the
correct device (usually the TV)
TV
Page
TV
Volume
&
TV
Channel
Cable
Page
Cable
Volume
&
Cable
Channel
Cable
Page
TV
Volume
&
Cable
Channel
Light
Button
Power ON Television
Power ON Cable Box
Power ON Stereo
Switch TV to HDMI 1
Switch STEREO to CaTV
1
2
3
4
5
Single Button
Press
One-Touch Activities
Easily record the steps it takes
to perform your favorite
activities and record them on a
single button.
Next time you hit that button,
like TV, all the steps happen
automatically!
Favorites Pages
Make surfing the channels
easier by creating up to 8
pages of channel icons that go
directly to your favorite
network!
No PC Required
Computer programmed remotes
can get complicated, and not
everyone has a computer, or feels
comfortable using one!
You have all the tools you need to
program this remote…your
hands!
Standard
Features
No Rules Operation
Typically remotes use infra-red light for sending commands to
devices, the problem is that this method requires “line-of-sight” to
the device and DOES NOT work through walls, floors or cabinet
doors.
Use an optional RF base station to eliminate the need to point the
remote and the ability to control your gear through those cabinet
doors…or from another room!!
Optional
Features
Lighting Control
Who watches television or movies with all of the lights ON?
Are you the type of person that likes the lights to be OFF?
Imagine that control, right at your fingertips with URC Lighting
products; just replace your existing lighting with, easy to install,
URC Lighting and you are ready.
Imagine hitting a button on your remote and having the lights dim
just as the movie starts; even if the phone rings or there is a knock
on the door, a simple button press illuminates the surroundings.
MRF-260 MRF-350
Optional RF Base Stations
In-Wall
Dimmer
In-Wall
Switch
Lamp
Dimmer
Optional Lighting Products
Tour Navigating the MX-450
LCD Buttons
These on-screen icons are
accessed by using the
adjoining button
On/Off Buttons
By default, these will send an
On/Off command to the
device that is displayed
LCD Navigation
These will help you to
navigate between pages
(PAGE+, PAGE-) or return to
the main menu (MAIN)
5-Way Cursor
Easy navigation for your
device (Up, Down, Left, Right
& Select)
Transport Controls
All of the commonly used
commands for controlling
DVRs, DVDs and other
recording devices
Volume & Channel
Controls
Convenient volume access
and easily scroll through
channels with Up, Down,
Previous or see a list of
Favorites.
Overview
The following are descriptions of each of these submenus:
•Basic Setup: Add all of your devices to the remote by using the built-in library, or
learning commands directly from the original remote. More information can be
found…
•Advanced Setup (only used this section once Basic setup has been completed): in
this section you can edit button names, hide pages, create one-touch activities
(macros), etc. More information can be found…
•Favorite Channels: use this menu item to set icons and channel numbers for your
favorite networks
•User Settings: this option allows you to make adjustments of the remote’s
operation like brightness, contrast, light duration, etc. More information can be
found…
•Display tips: In this section you may enable or disable the Set-Up tips. Although
they are convenient when programming without a manual, you will not need
them for programming if you are using this documentation.
Set-Up Screen Overview
The Main Setup Menu of the MX-450 is the heart of the remote.
This menu will serve as your guide as you to add your TV, DVD,
Satellite and other devices to the remote.
To enter the Main Setup Menu, press and hold the MAIN button for 3 seconds.
1
A.
Select Search the
Database to search
for device codes.
Within the Search the Database section of Basic
Setup, we will add each of your devices or
components to the MX-450.
A
C D
E
B.
Select an Icon
Position to save your
device by pressing a
screen button to
make your choice.
C.
Select the
type of device by
pressing the UP or
DOWN buttons on
the remote’s
5-way cursor.
D.
Choose a device
icon by pressing
the LEFT or RIGHT
buttons to see
other icons.
Press select when
finished.
E.
Type in a name for
the device using the
number key’s
alphanumeric
equivalent
B
5-way cursor
Use
Arrows
and
Select (SEL)
to navigate.
Adding Devices
Basic Setup
F.
Select the Brand of
your device by
pressing the UP and
DOWN buttons.
F
G
H
I
J
G.
Turn ON your device
and point the remote
toward it.
Press the UP or
DOWN buttons until
the device turns OFF.
H.
Test the code by
pressing the
Power On, Vol+ & Ch+
If the device responds
to this code, press Pass.
If not, press Back to
find a better match.
(repeat step G.)
I.
When a device is
Pass-ed the MX-450
will save the device
(blue progress bar
at the bottom of the
screen)
J.
Repeat this process
to add more devices
by selecting Yes
then Next.
When FINISHED adding devices,
select NO then NEXT when asked to
setup another device.
1 1
Adding Devices
Basic Setup
Otros manuales para MX-450
1
Tabla de contenidos
Otros manuales de Mando a distancia de URC
URC
URC TRC-780 Manual de usuario
URC
URC MX-990 Manual de usuario
URC
URC MX-1400 Manual de usuario
URC
URC COMPLETE CONTROL MX-4000 Manual de usuario
URC
URC TRC-1080 Manual de usuario
URC
URC UR2-DTA-RF4 Manual de usuario
URC
URC UR3L-SR4 Manual de usuario
URC
URC Complete Control MX-880 Manual de usuario
URC
URC RM-2 Manual de usuario
URC
URC Total Control TRC-1280 Manual de usuario
URC
URC MX-HomePro MXHP-R500 Manual de usuario
URC
URC MX-890 Manual de usuario
URC
URC MX-890i Manual de usuario
URC
URC MX-780I Manual de usuario
URC
URC TRC-1080 Manual de usuario
URC
URC TRC-1480 Manual de usuario
URC
URC HCM-R1 Manual de usuario
URC
URC MX-780 Manual de usuario
URC
URC MX-900 Manual de usuario
URC
URC Complete Control MX-810 Manual de usuario
