Uplus Lighting 7X45 COB PAR Manual de usuario

User manual

7X45 COB PAR

Please read the instructions carefully before use

TABLE OF CONTENTS

1. Safety Instructions……………………………………………………………………………3

2.Technical Specifications………………………………………………………………………4

3.Control Menu ……………………………………………………………………………………4-5

4.DMX Channels ……………………………………………………………………………………6-8

5.Trouble Shooting…………………………………………………………………………………9

6.Fixture Cleaning………………………………………………………… ………………………9

STATEMENT

The product has well capability and intact packing when leave factory. All of the user should

comply with warning item and manual, any misuse cause of the damages are not included in our

guarantee, and also can not be responsible for any malfunction & problem owing to ignore the

manual.

1.Safety Instructions

Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that they also

receive this instruction booklet.

•Unpack and check carefully there is no transportation damage before using the unit.

•Before operating, ensure that the voltage and frequency of power supply match the power requirements of the

unit.

•It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.

•The unit is for indoor use only. Use only in a dry location.

•The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent surfaces. Be sure

that no ventilation slots are blocked.

•Disconnect main power before replacement or servicing.

•Make sure there are no flammable materials close to the unit while operating as it is fire hazard.

•Use safety cable when fixes this unit. DO NOT handle the unit by taking its head only, but always by taking its

base.

•Maximum ambient temperature is Ta: 40℃. DO NOT operate it where the temperature is higher than this Unit

surface temperature may reach up to 85℃. DO NOT touch the housing bare-hand during its operation. Turn off

the power and allow about 15 minutes for the unit to cool down before replacing or serving.

•the event of serious operating problem, stop using the unit immediately.Never try to repair the unit by yourself.

Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest

authorized technical assistance center. Always use the same type spare parts.

•DO NOT touch any wire during operation as high voltage might be causing electric shock.

Warning:

•To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture.

•The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.

Caution:

•There are no user serviceable parts inside the unit. DO NOT open the housing or attempt any repairs yourself.

In the unlikely event your unit may require service, please contact your nearest dealer.

Installation:

•The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to

avoid vibration and slipping while operating. And make sure that the structure to which you are attaching the unit

is secure and is able to support a weight of 10 times of the unit’s weight. Also always use a safety cable that can

hold 12 times of the weight of the unit when installing the fixture.

•The equipment must be fixed by professionals. And it must be fixed at a place where is out of the touch of

people.

2.Technical Specifications

Light Sources: 7*45W COB 3in1 LED

Power Consumption: 320W

Power Voltage: AC 100-240V, 50/60Hz

Beam angle:12°/36°

Dimension:230*290*90mm;

NW:3.6 KGS

Control

DMX Channel: 3/7/25 Channel

Control Modes: DMX 512, Auto mode, Master/Slave, Sound active

Construction

Display: Digital panel

Data In/Out socket: 3-pin XLR sockets

Protection Rating: IP20

Features

Good cooling system, over heat protection

Dimmer: 0~100% smooth dimming

3.Control Menu

The DMX512 is widely used in intelligent lighting control,with a DMX 512 controller.connect several

lights together,dmx in and dmx out,

3 pin XLR connectors: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+)

Display:

A B C D

[A] menu selection or return to previous menu.

[B] press [B] through the menu list to increase/change the value of the current function.

[C] press [C] through the menu list to decrease/change the value of the current function.

[D] confirm & quit out current function setting.

Display panel operation instructionDisplay panel operation instruction

Show

Function

Value

Instruction

A001

DMX address

001~512

address code

B, C increase or reduce the value

25ch

CH address

Channel selection(25CH/3CH/7CH)

B,C increase or reduce the Channels

Tr00

running change

000~035

B, C Change running pattern

Tu00

running speed

000~099

B, C Change running speed

Cp99

colorful gradient

000~255

B, C Change colorful gradient speed

Sound

Colorful sound control changes

000~255

B,C Change the speed

R255

Red dim

000 ~ 255

B,C change the brightness

G255

Green dim

000 ~ 255

B,C change the brightness

B255

Blue dim

00 ~ 15

B,C change the brightness

4.DMX Channels

DMX channel´s functions and values (25 DMX channels):

Channel

Function

DMX Value

Instruction

CH1

Total Dimmer

0~255

Total Dimmer- Dark to Bright

CH2

Total strobe

0~255

Total Strobe-slow to fast

CH3

Build in effect

0~5

No function

6~11

Build in effect 1

12~17

Build in effect 2

18~23

Build in effect 3

24~29

Build in effect 4

30~35

Build in effect 5

36~41

Build in effect 6

42~47

Build in effect 7

48~53

Build in effect 8

54~59

Build in effect 9

60~65

Build in effect 10

66~71

Build in effect 11

72~77

Build in effect 12

78~83

Build in effect 13

84~89

Build in effect 14

90~95

Build in effect 15

96~101

Build in effect 16

102~107

Build in effect 17

108~113

Build in effect 18

114~119

Build in effect 19

120~125

Build in effect 20

126~131

Build in effect 21

132~137

Build in effect 22

138~143

Build in effect 23

144~149

Build in effect 24

150~155

Build in effect 25

156~161

Build in effect 26

162~167

Build in effect 27

168~173

Build in effect 28

174~179

Build in effect 29

180~185

Build in effect 30

CH3

Build in effect

186~191

Build in effect 31

192~197

Build in effect 32

198~203

Build in effect 33

204~209

Build in effect 34

210~215

Build in effect 35

216~250

Gradient

251~255

Sound control

CH4

speed

0~255

Fast to slow

CH5

R1 Dimmer

0~255

Red1 Dimmer- Dark to Bright

CH6

G1 Dimmer

0~255

Green1 Dimmer- Dark to Bright

CH7

B1 Dimmer

0~255

Blue1 Dimmer- Dark to Bright

CH8

R2 Dimmer

0~255

Red2 Dimmer- Dark to Bright

CH9

G2 Dimmer

0~255

Green2 Dimmer- Dark to Bright

CH10

B2 Dimmer

0~255

Blue2 Dimmer- Dark to Bright

CH11

R3 Dimmer

0~255

Red3 Dimmer- Dark to Bright

CH12

G3 Dimmer

0~255

Green3 Dimmer- Dark to Bright

CH13

B3 Dimmer

0~255

Blue3 Dimmer- Dark to Bright

CH14

R4 Dimmer

0~255

Red4 Dimmer- Dark to Bright

CH15

G4 Dimmer

0~255

Green4 Dimmer- Dark to Bright

CH16

B4 Dimmer

0~255

Blue4 Dimmer- Dark to Bright

CH17

R5 Dimmer

0~255

Red5 Dimmer- Dark to Bright

CH18

G5 Dimmer

0~255

Green5 Dimmer- Dark to Bright

CH19

B5 Dimmer

0~255

Blue5 Dimmer- Dark to Bright

CH20

R6 Dimmer

0~255

Red6 Dimmer- Dark to Bright

CH21

G6 Dimmer

0~255

Green6 Dimmer- Dark to Bright

CH22

B6 Dimmer

0~255

Blue6 Dimmer- Dark to Bright

CH23

R7 Dimmer

0~255

Red7 Dimmer- Dark to Bright

CH24

G7 Dimmer

0~255

Green7 Dimmer- Dark to Bright

CH25

B7 Dimmer

0~255

Blue7 Dimmer- Dark to Bright

DMX channel´s functions and values (7 DMX channels):

Channel

Function

DMX Value

Instruction

CH1

Total Dimmer

0~255

Total Dimmer- Dark to Bright

CH2

Total strobe

0~255

Total Strobe-slow to fast

0~5

No function

6~11

Build in effect 1

12~17

Build in effect 2

18~23

Build in effect 3

24~29

Build in effect 4

30~35

Build in effect 5

36~41

Build in effect 6

42~47

Build in effect 7

CH3

Build in effect

48~53

Build in effect 8

54~59

Build in effect 9

60~65

Build in effect 10

66~71

Build in effect 11

72~77

Build in effect 12

78~83

Build in effect 13

84~89

Build in effect 14

90~95

Build in effect 15

96~101

Build in effect 16

102~107

Build in effect 17

108~113

Build in effect 18

114~119

Build in effect 19

120~125

Build in effect 20

126~131

Build in effect 21

132~137

Build in effect 22

138~143

Build in effect 23

144~149

Build in effect 24

150~155

Build in effect 25

156~161

Build in effect 26

162~167

Build in effect 27

168~173

Build in effect 28

174~179

Build in effect 29

180~185

Build in effect 30

186~191

Build in effect 31

192~197

Build in effect 32

198~203

Build in effect 33

204~209

Build in effect 34

210~215

Build in effect 35

216~250

Gradient

251~255

Sound control

CH4

speed

0~255

Slow to fast

CH5

R Dimmer

0~255

Red Dimmer- Dark to Bright

CH6

G Dimmer

0~255

Green Dimmer- Dark to Bright

CH7

B Dimmer

0~255

Blue Dimmer- Dark to Bright

DMX channel´s functions and values (3 DMX channels):

Channel

Function

DMX Value

Instruction

CH1

R Dimmer

0~255

Red Dimmer- Dark to Bright

CH2

G Dimmer

0~255

Green Dimmer- Dark to Bright

CH3

B Dimmer

0~255

Blue Dimmer- Dark to Bright

5.Trouble Shooting

ollo

ing

few

oble

occu

uring

ope

tion

leshooting

The

does

work

ght

Check

nect

ion of p

owe

eas

ure

ins

volt

Check

pow

LED

responding

LED

on.

che

nectors,

link

ope

espons

el,

che

ess

etti

ity

nter

ittent

oble

che

ins

onn

ecto

PCB

nit

the

iou

ntroller

Check

or run

lon

volta

les

terfer

ence

inter

face

circui

One

the

cha

ing

tep

moto

dam

the

nect

PCB

oken.

oto

’

ive

PCB

ndition

6.Fixture Cleaning

The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to

optimize light output. Cleaning frequency depends on the environment in which the fixture operates:

damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics .

Clean with soft cloth using normal glass cleaning fluid.

Always dry the parts carefully.

Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.

Tabla de contenidos

Otros manuales de Equipo de DJ de Uplus Lighting

Uplus Lighting

Uplus Lighting AZ-SPOT PR 300 Manual de usuario

Uplus Lighting

Uplus Lighting 3X40B-EYE Manual de usuario

Uplus Lighting

Uplus Lighting LED PROFILE AZ Manual de usuario

Uplus Lighting

Uplus Lighting 7X40 B EYE Manual de usuario

Uplus Lighting

Uplus Lighting BSW 380 Manual de usuario

Uplus Lighting

Uplus Lighting IP 300Z SPOT PENTA Manual de usuario

Uplus Lighting

Uplus Lighting 37X15Z Manual de usuario

Uplus Lighting

Uplus Lighting IP12X10 PAR Manual de usuario

Uplus Lighting

Uplus Lighting BSW 280 Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario