Universal 5588 Series Manual de usuario
INSTRUCTION
MANUAL CV-G200
0701-001 Tg1481-ID-SO
Recycle Conveyor (5588 Series)
INSTRUCTION MANUAL
Recycle Conveyor
CV-G200
Read this instruction manual carefully and keep it at hand.
•Before operating the machine, read these safety instructions
carefully and fully understand them.
•Always keep this instruction manual carefully at hand to refer it
anytime and anywhere.
5588 Series
UIC MANUAL ID No. 50391946
Tg1481-ID-SO
INSTRUCTION MANUAL
The instruction manual is compiled especially for
the operations of recycle conveyor.
Please read this manual carefully for correct
operations and pay special attention to safety
precautions.
After reading through this manual, please use this
manual as an occasional reference and keep it
within reach.
This manual is made of recycled paper.
Recycle Conveyor
CV-G200
5588 Series
0701-001
OM-1381-001
January, 2007 First Edition
Tg1481-ID-SO
Before using this manual, please note the following items.
1. The contents of this manual are subject to change for improvement
without prior notice. Please pay attention to the latest information that will
be provided or issued by our company.
2. The copyright of the instruction manual belongs to Universal Instruments
Corporation.
This manual shall not be copied, in whole or part, without written consent
of the publisher.
3. Our company shall not be held to any liability for any damages suffered
or incurred by the end user, arising from any operations other than those
(including the purposes and methods) described in this instruction manual.
Be sure to handle the machine carefully.
4. This instruction manual neither guarantees any license to industrial
property rights, etc., nor grants any license of such rights.
0701-001
0701-001
Before Use
We are grateful to you for purchasing this recycle conveyor for our direct-drive
modular mounter (chip mounter).
This instruction manual describes the functions, handling, and operations of this
recycle conveyor for those who have finished the basic training of the chip mounter.
Before operating this recycle conveyor, please read this instruction manual
carefully to fully understand the instructions and precautionary measures for safety
purposes.
After reading through this manual, please use this manual as an occasional
reference and keep it within reach.
1Tg1481-ID-SO
0701-001
About the Instruction Manual
First of all, please read the paragraphs in "Caution and Warning" and "Safety Precautions"
(first part of this manual).
Identifying Icons in Manual
This icon shows an important precautionary or regulatory item.
This icon shows the descriptions for correct operations of the machine.
This icon shows the items to be referred to.
This icon shows the operation procedures.
Notice
Note
Reference
Procedure
2Tg1481-ID-SO
0701-001
Caution and Warning
Limited Warranty
UIC represents and warrants the following based on the specifications in the instruction
manual as long as this recycle conveyor is used in accordance with the provided instruc-
tions.
(1) Coverage
Should a recycle conveyor breakdown be due to any defect in our manufacturing, we
will repair the recycle conveyor for free.
(2) Warranty Period
This warranty is effective within one year from the purchase date of the recycle con-
veyor.
(3) Warranty Exclusions
This warranty does not apply in the following cases even within the warranty period.
(a) Damage caused by failure to provide the specified suitable installation, operat-
ing environment, or maintenance for the machine.
(b) Damage caused by failure to use the specified power source (voltage and fre-
quency), including abnormal power supply.
(c) Damage caused by corrosions in electrical circuits and deterioration of optical
elements due to ambient air mixed with strong corrosive gas.
(d) Damage caused by hardware, software, and auxiliaries that are not provided by
us.
(e) Damage caused by failure to handle or maintain the recycle conveyor properly.
(f) Damage caused by any repair work performed by any party other than the ser-
vicing company approved by us.
(g) Damage caused by failure to move or transport this conveyor properly.
(h) Damage caused by unapproved disassembly or modification.
(i) Damage caused by a force majeure such as, but not limited to, fire, earthquake,
storm, flood, lightning, strike, labor dispute, riots, crimes, terrorism, war, radio-
active contamination, toxic substance, or any other incident beyond our reason-
able control.
(k) Damage caused by a computer virus.
3Tg1481-ID-SO
0701-001
In no event shall UIC be liable for any warranty other than the express one here and
any implied warranties of merchantability or fitness for any particular purpose.
In addition, UIC is not liable for any direct or indirect loss or damages whatsoever,
whether based upon express or implied warranty.
No oral or written information, or advice/suggestion given by UIC (its executives,
employees, agencies and all concerned) to the original purchaser or a third party shall
create a warranty or obligation to UIC, regarding the conformity with the perfor-
mance of the recycle conveyor.
Formally approved information or advice/suggestion are excluded.
UIC is not responsible for any damage to the provided application software or loss of
data, arising from any damage to this recycle conveyor.
About Specification Change
Consult the marketing department of UIC for desired changes of this recycle conveyor
specifications.
In no event will we be liable for any direct, indirect, special, incidental, or consequential
damages resulting from any modification made without any prior notice in a written form.
4Tg1481-ID-SO
Safety Precautions
5Tg1481-ID-SO
0701-001
"Safety Precautions" describes the precautionary items that should be kept to prevent
personal injury or property damage beforehand and use this recycle conveyor safely.
Before using tthis recycle conveyor, please understand the contents of the follow-
ing safety precautions.
1. About Safety Precaution Labels
The safety precautions are expressed, using the combinations of safety alert symbols
" " and headwords such as "WARNING", or "CAUTION" according to the degree of
danger.
Please fully understand the meaning of each precautionary item for safety purposes.
The safety alert symbols " " are used to indicate a potential personal injury
hazard.
Please pay attention to all safety messages that follow the safety alert symbols to avoid
any possibility of injury or death.
WARNING This indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION This indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
A precautionary item identified as " CAUTION" may also lead the operator
to reach a serious result. To avert a serious result, please respect the described
cautions.
CAUTION This indicates a potentially hazardous situation which, if not
avoided, may result in property damages.
Safety Precautions
6Tg1481-ID-SO
0701-001
• Identifying Alert Icons
: This symbol mark represents danger or prompts warning.
: This symbol mark represents prohibited operations.
: This symbol mark represents forced operations or instructions.
Safety Precautions
7Tg1481-ID-SO
0701-001
2. Common Precautionary Items
Basic Precautions
Only trained persons should operate this recycle conveyor.
Do not allow any untrained person to operate the recycle conveyor, mishandling of the
recycle conveyor can cause injuries.
Before operating this recycle conveyor, please read the instruction manual carefully
for correct operations.
Please keep the instruction manual in a safe place within reach.
Follow the instructions in the instruction manual for correct handling of this recycle
conveyor.
Be sure to fully understand the contents of the safety instructions in the instruction
manual and follow the instructions.
Please keep the precautionary items described in the instruction manual or the machine
(5588 Series).
When the precautionary items are ignored, it will result in personal injury or property
damage (damage to the recycle conveyor).
Be sure to follow the operational instructions described in the instruction manual.
Do not modify this recycle conveyor nor use any parts other than the specified ones.
Doing otherwise may cause personal injury.
Do not perform any operations other than those described in the instruction manual.
Whenever a problem arises, regarding this recycle conveyor operations, performance,
etc., please contact the marketing department of UIC for the solution.
Although the precautionary items have been reviewed repeatedly, an incident far be-
yond our expectation may occur.
Not only follow the precautionary instructions described in the instruction manual but
also try to handle this recycle conveyor carefully at your discretion all the time.
Be sure to strictly keep the above-mentioned instructions.
Otherwise, not only wrong operations of the component supply but also personal injury
will result.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Equipos industriales de Universal
